交换机和AC中的一个做dhcp就可以
LWS1:
vlan batch 100 to 103 200 300
interface Vlanif100
ip address 192.168.10.254 255.255.255.0
#
interface Vlanif101
ip address 10.1.12.1 255.255.255.0
#
interface Vlanif200
ip address 192.168.20.254 255.255.255.0
#
interface Vlanif300
ip address 192.168.30.254 255.255.255.0
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk pvid vlan 100
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/3
#
interface GigabitEthernet0/0/4
port link-type access
port default vlan 300
ospf 1
area 0.0.0.0
network 192.168.10.254 0.0.0.0
network 192.168.20.254 0.0.0.0
network 10.1.12.1 0.0.0.0
network 192.168.30.254 0.0.0.0
AC1:
vlan batch 100 to 104 200
dhcp enable
interface Vlanif100
ip address 192.168.10.253 255.255.255.0
dhcp select interface
#
interface Vlanif200
ip address 192.168.20.253 255.255.255.0
ospf 1
area 0.0.0.0
network 192.168.20.253 0.0.0.0
查看邻居是否起来
AC1:
ap auth-mode no-auth
ap-confirm all
capwap source interface vlanif100
查看ap上线
做模板：
wlan
security-profile name vlan101
quit
ssid-profile name vlan101
ssid vlan101
vap-profile name vlan101
service-vlan vlan-id 101
ssid-profile vlan101
security-profile vlan101
ap-id 0
vap-profile vlan101 wlan 1 radio all
AR:
interface GigabitEthernet0/0/0
ip address 192.168.30.253 255.255.255.0
#
interface LoopBack0
ip address 172.16.1.253 255.255.255.0
ip address 172.16.2.253 255.255.255.0 sub
#
ospf 1
area 0.0.0.0
network 192.168.30.253 0.0.0.0
network 172.16.1.253 0.0.0.0
network 172.16.2.253 0.0.0.0
STA1可以ping通路由器，跟踪如下：
AC:（让sta1去路由器直接走，不或AC
vap-profile name vlan101
forward-mode direct-forward
查看：
