NX二次开发-UFUN打开工程图UF_DRAW_open_drawing

 1 NX9+VS2012
 2 
 3 #include <uf.h>
 4 #include <uf_draw.h>
 5 #include <uf_part.h>
 6 
 7 
 8 
 9 UF_initialize();
10 
11 //新建工程图(A4图纸)
12 char* DrawingName = "ABC";//设置图纸名字
13 UF_DRAW_info_t DrawingInfo;//设置图纸大小、投影视角、视图比例等
14 DrawingInfo.size_state = UF_DRAW_METRIC_SIZE;//设置图纸类型
15 DrawingInfo.size.metric_size_code = UF_DRAW_A4;//设置图纸大小
16 DrawingInfo.drawing_scale = 1.0;//设置比例
17 DrawingInfo.units = UF_PART_METRIC;//设置单位
18 DrawingInfo.projection_angle = UF_DRAW_FIRST_ANGLE_PROJECTION;//设置投影视角
19 tag_t DrawingTag = NULL_TAG;
20 UF_DRAW_create_drawing(DrawingName, &DrawingInfo, &DrawingTag);
21 
22 //新建工程图(自定义大小)
23 char* DrawingName1 = "EDF";//设置图纸名字
24 UF_DRAW_info_t DrawingInfo1;//设置图纸大小、投影视角、视图比例等
25 DrawingInfo1.size_state = UF_DRAW_CUSTOM_SIZE;//设置图纸类型
26 DrawingInfo1.size.custom_size[0] = 300;//设置图纸高度
27 DrawingInfo1.size.custom_size[1] = 300;//设置图纸长度
28 DrawingInfo1.drawing_scale = 1.0;//设置比例
29 DrawingInfo1.units = UF_PART_METRIC;//设置单位
30 DrawingInfo1.projection_angle = UF_DRAW_FIRST_ANGLE_PROJECTION;//设置投影视角
31 tag_t DrawingTag1 = NULL_TAG;
32 UF_DRAW_create_drawing(DrawingName1, &DrawingInfo1, &DrawingTag1);
33 
34 //打开工程图
35 UF_DRAW_open_drawing(DrawingTag1);
36 
37 UF_terminate();