转 解决 OCFS2 不能自动挂载 提示 o2net_connect_expiredhttps://blog.csdn.net/tianlesoftware/article/details/4806813 RAC 在启动的是要要先启动OCFS2， 在修改/etc/sysconfig/o2cb的配置后，发现两机器只有一台可以自动挂载ocfs2分区，而另外一台不能自动挂载。但启动完毕后，手动挂载正常。
一、详细情况
两机器分别是dbsrv-1和dbsrv-2，使用交叉线做网络心跳，并在cluster.conf中使用私有心跳IP，非公用IP地址。
1、检查o2cb状态
启动后，o2cb服务是启动正常的，ocfs2模块也加载正常的，但心跳是Not Active：
引用
Checking heartbeat: Not Active
2、检查/etc/fstab文件
引用
#cat /etc/fstab|grep ocfs2
/dev/sdc1 /oradata ocfs2 _netdev,datavolume,nointr 0 0
配置正确；
3、检查两机器的/etc/ocfs2/cluster.conf内容
引用
# more /etc/ocfs2/cluster.conf
node:
ip_port = 7777
ip_address = 172.20.3.2
number = 0
name = dbsrv-2
cluster = ocfs2
node:
ip_port = 7777
ip_address = 172.20.3.1
number = 1
name = dbsrv-1
cluster = ocfs2
cluster:
node_count = 2
name = ocfs2
已经确认，两机器该文件是完全相同的。
4、查看系统日志
报错信息如下：
引用
Jul 20 19:33:18 dbsrv-2 kernel: OCFS2 1.2.3
Jul 20 19:33:24 dbsrv-2 kernel: (4452,0):o2net_connect_expired:1446 ERROR: no connection established with node 1 after 10 seconds, giving up and returning errors.
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):dlm_request_join:786 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):dlm_try_to_join_domain:934 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):dlm_join_domain:1186 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):dlm_register_domain:1379 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):ocfs2_dlm_init:2009 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: (4478,2):ocfs2_mount_volume:1062 ERROR: status = -107
Jul 20 19:33:24 dbsrv-2 kernel: ocfs2: Unmounting device (8,33) on (node 0)
Jul 20 19:33:26 dbsrv-2 mount: mount.ocfs2: Transport endpoint is not connected
Jul 20 19:33:26 dbsrv-2 mount:
Jul 20 19:33:26 dbsrv-2 netfs: Mounting other filesystems: failed
二、分析问题
1、node节点的启动顺序
从Google搜索到如此的信息：
引用
Mount triggers the heartbeat thread which triggers the o2net
to make a connection to all heartbeating nodes. If this connection
fails,the mount fails. (The larger node number initiates the connection
to the lower node number.)
说明o2cb启动的时候，是根据node节点的大小顺序启动的。
而在cluster.conf中，node0是dbsrv-2，node1是dbsrv-1，所以，dbsrv-1在启动的时候马上可联通本机IP，然后挂载ocfs2分区；但dbsrv-2启动的时候，则不能即时发现对方IP地址，所以启动失败。
2、尝试修改HEARTBEAT_THRESHOLD参数
从Goolge搜索到另外一条信息：
引用
After confirming with Stephan, this problem appears to relate to the HEARTBEAT_THRESHOLD parameter as set in /etc/sysconfig/o2cb. After encountering this myself and having confirmed with a couple of other people in the list that it has caused problems, it seems that the default threshold of 7 is possibly too short, even in reasonably fast server-storage solutions such as an HP DL380 Packaged Cluster.
Does the OCFS2 development team also consider this to be too short, or is altering the paramater just a workaround that shouldn't be used? If this is the case then how should we approach the problem of self-fencing nodes?
Also, can we expect this behaviour with some platforms but not others, or is it too short for all platforms? If it is a blanket problem, then should the default threshold be raised?
Finally, if the altering the threshold is a valid solution, could it please be added to the FAQs and the user guide so that people know to adjust it as a first step on encountering the problem, rather than having to post to the list and wait for replies.
并参考网上的资料，修改/etc/sysconfig/o2cb的HEARTBEAT_THRESHOLD参数为301，启动后报：
引用
Jul 23 13:59:50 dbsrv-2 kernel: (4477,0):o2hb_check_slot:883 ERROR: Node 1 on device sdc1 has a dead count of 14000 ms, but our count is 602000 ms.
Jul 23 13:59:50 dbsrv-2 kernel: Please double check your configuration values for 'O2CB_HEARTBEAT_THRESHOLD'
Jul 23 13:59:54 dbsrv-2 kernel: OCFS2 1.2.3
Jul 23 14:00:00 dbsrv-2 kernel: (4449,0):o2net_connect_expired:1446 ERROR: no connection established with node 1 after 10 seconds, giving up and returning errors.
Jul 23 14:00:00 dbsrv-2 kernel: (4475,2):dlm_request_join:786 ERROR: status = -107
问题依旧。
※注释
引用
[隔离时间（秒）] = (O2CB_HEARTBEAT_THRESHOLD - 1) * 2
(301 - 1) * 2 = 600 秒
综上所述，已经能清楚所有配置都是正确的。
导致故障的原因是：
在启动o2cb服务的前，由于某些原因，o2cb依赖的IP地址未能及时取得联系，操作了其限定的时间，而启动失败。而在机器完整启动后，网络已经正常，所以，手动挂载ocfs2分区正常。
三、解决问题
1、Oracle metalink给出的信息
引用
The problem here is that network layer not becoming fully functional even after /etc/init.d/network script is done executing. The proposed patch is a work around and is not fixing a problem in o2cb script.
2、解决方法
引用
a）确保所有配置文件都正确，无差异；
b）确保两服务器的机器时间不要相差太远；
（可使用时间同步）
c）o2cb使用的cluster.conf文件中，应使用心跳IP，而非公网IP
d）修改/etc/init.d/o2cb脚本，在最前面加入一个sleep的延迟时间，以等待网络正常；
e）实在还是不行，把启动脚本放到/etc/rc.local中
mount -t ocfs2 -o datavolume,nointr /dev/sdc1 /oradata
/etc/init.d/init.crs start
四、已知可能的原因
1、磁盘原因
例如使用iSCSI、Firewire等做盘柜，可能因读取时间长，引发timeout导致问题；
2、网络原因
如果使用公网IP做o2cb的判断，则由于在加载网卡驱动后，交换机未能及时通讯（特别是Cisco的交换机），导致IP通讯失败；
如果使用心跳IP做o2cb的判断，则有部分网卡在加载驱动后，未能马上激活，并与对方网卡联通而导致失败。
总体来说，都是和硬件的关系比较多。
https://img-blog.csdnimg.cn/20190217105710569.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3UwMTEwNzgxNDE=,size_16,color_FFFFFF,t_70《算法导论 第三版英文版》_高清中文版.pdf
https://pan.baidu.com/s/17D1kXU6dLdU0YwHM2cvNMw
《深度学习入门：基于Python的理论与实现》_高清中文版.pdf
https://pan.baidu.com/s/1IeVs35f3gX5r6eAdiRQw4A
《深入浅出数据分析》_高清中文版.pdf
https://pan.baidu.com/s/1GV-QNbtmjZqumDkk8s7z5w
《Python编程：从入门到实践》_高清中文版.pdf
https://pan.baidu.com/s/1GUNSg4mdpeOf1LC_MjXunQ
《Python科学计算》_高清中文版.pdf
https://pan.baidu.com/s/1-hDKhK-7rDDFll_UFpKmpw