lfs(systemd版本)学习笔记-第3页 的地址:https://www.cnblogs.com/renren-study-notes/p/10385857.html
第7.2章节
网络配置
1.网络设备命名
cat > /etc/systemd/network/10-ether0.link << "EOF" [Match] # Change the MAC address as appropriate for your network device MACAddress=12:34:45:78:90:AB(更改为有线网卡的mac号,在主机使用ifconfig查看) [Link] Name=ether0(更改为有线网卡的名字,在主机使用ifconfig查看) EOF
2.静态ip配置
cat > /etc/systemd/network/10-eth-static.network << "EOF" [Match] Name=<network-device-name> [Network] Address=192.168.0.2/24 Gateway=192.168.0.1 DNS=192.168.0.1(使用静态/etc/resolv.conf文件,这个选项可以去掉) Domains=<Your Domain Name> EOF
3.dhcp配置
cat > /etc/systemd/network/10-eth-dhcp.network << "EOF" [Match] Name=<network-device-name> [Network] DHCP=ipv4 [DHCP] UseDomains=true EOF
4.systemd-resolved配置
ln -sfv /run/systemd/resolve/resolv.conf /etc/resolv.conf
5.静态resolv.conf配置
cat > /etc/resolv.conf << "EOF" # Begin /etc/resolv.conf domain <Your Domain Name> nameserver 8.8.8.8 nameserver 8.8.4.4 # End /etc/resolv.conf EOF
6.配置主机名字
echo "<lfs>" > /etc/hostname <lfs>更换为主机名字
7.创建/etc/hosts文件
(1)使用dhcp自动分配
cat > /etc/hosts << "EOF"
# Begin /etc/hosts
127.0.0.1 localhost
127.0.1.1 <FQDN> <HOSTNAME>
<192.168.1.1> <FQDN> <HOSTNAME> [alias1] [alias2 ...]
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes ff02::2 ip6-allrouters # End /etc/hosts EOF
(2)使用静态地址
cat > /etc/hosts << "EOF" # Begin /etc/hosts 127.0.0.1 localhost 127.0.1.1 <FQDN> <HOSTNAME> <192.168.0.2> <FQDN> <HOSTNAME> [alias1] [alias2] ... ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters # End /etc/hosts EOF
第7.5章节
如果电脑上面是多系统,并且有windows系统,就不要使用系统硬件时间作为系统时间(会有时差)。如果没有windows系统不需要更改。具体内容参见:我的linux时间综述笔记地址:https://www.cnblogs.com/renren-study-notes/p/10229743.html
硬件时间设置为本地时间
cat > /etc/adjtime << "EOF" 0.0 0 0.0 0 LOCAL EOF
第7.7章节
配置语言环境
运行以下命令获取Glibc支持的所有语言环境的列表:
locale -a
结果:
C en_US.utf8 POSIX zh_CN.utf8
这里我们选择en_US.utf8
以下是对对所选择的语言的测试
LC_ALL=<locale name> locale charmap LC_ALL=<locale name> locale language LC_ALL=<locale name> locale charmap LC_ALL=<locale name> locale int_curr_symbol LC_ALL=<locale name> locale int_prefix
确定正确的区域设置后,创建 /etc/profile
文件:
cat > /etc/profile << "EOF" # Begin /etc/profile export LANG=en_US.utf8 (这里替换为所选择的语言环境) # End /etc/profile EOF
第7.8章节
1.创建/etc/inputrc配置文件
cat > /etc/inputrc << "EOF"
# Begin /etc/inputrc
# Modified by Chris Lynn <[email protected]>
# Allow the command prompt to wrap to the next line
set horizontal-scroll-mode Off
# Enable 8bit input
set meta-flag On
set input-meta On # Turns off 8th bit stripping set convert-meta Off # Keep the 8th bit for display set output-meta On # none, visible or audible set bell-style none # All of the following map the escape sequence of the value # contained in the 1st argument to the readline specific functions "\eOd": backward-word "\eOc": forward-word # for linux console "\e[1~": beginning-of-line "\e[4~": end-of-line "\e[5~": beginning-of-history "\e[6~": end-of-history "\e[3~": delete-char "\e[2~": quoted-insert # for xterm "\eOH": beginning-of-line "\eOF": end-of-line # for Konsole "\e[H": beginning-of-line "\e[F": end-of-line # End /etc/inputrc EOF
第7.9章节
1.创建/etc/shells文件
cat > /etc/shells << "EOF"
# Begin /etc/shells
/bin/sh
/bin/bash
# End /etc/shells
EOF
第7.10章节
1.引导时禁用屏幕清除
mkdir -pv /etc/systemd/system/[email protected] cat > /etc/systemd/system/[email protected]/noclear.conf << EOF [Service] TTYVTDisallocate=no EOF
2.禁用/ tmp的tmpfs
ln -sfv /dev/null /etc/systemd/system/tmp.mount
第8.2章节
1.更改为lfs所创建的分区到相应位置即可(这个文件是配置lfs开机自动挂载的分区)
cat > /etc/fstab << "EOF" # Begin /etc/fstab # file system mount-point type options dump fsck # order /dev/sda9 /boot ext4 defaults 1 1 /dev/sda10 / ext4 defaults 1 1 /dev/sda11 /home ext4 defaults 1 1 /dev/sda12 swap swap pri=1 0 0 proc /proc proc nosuid,noexec,nodev 0 0 sysfs /sys sysfs nosuid,noexec,nodev 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 tmpfs /run tmpfs defaults 0 0 devtmpfs /dev devtmpfs mode=0755,nosuid 0 0 # End /etc/fstab EOF
第8.3章节
配置编译安装linux内核
1.首先进入sources目录
cd /sources
2.解压内核文件压缩包
tar -xvf linux-4.18.5.tar.xz
3.进入内核包目录
cd linux-4.18.5
4.准备编译
make mrproper
5.设置默认内核配置状态
make defconfig
6.设置内核也可以通过修改.config文件来进行设置
make menuconfig
7.设置书中提供的以下选项
General setup --> [ ] Enable deprecated sysfs features to support old userspace tools [CONFIG_SYSFS_DEPRECATED] [ ] Enable deprecated sysfs features by default [CONFIG_SYSFS_DEPRECATED_V2] [*] open by fhandle syscalls [CONFIG_FHANDLE] [ ] Auditing support [CONFIG_AUDIT] [*] Control Group support [CONFIG_CGROUPS] Processor type and features ---> [*] Enable seccomp to safely compute untrusted bytecode [CONFIG_SECCOMP] Networking support ---> Networking options ---> <*> The IPv6 protocol [CONFIG_IPV6] Device Drivers ---> Generic Driver Options ---> [ ] Support for uevent helper [CONFIG_UEVENT_HELPER] [*] Maintain a devtmpfs filesystem to mount at /dev [CONFIG_DEVTMPFS] [ ] Fallback user-helper invocation for firmware loading [CONFIG_FW_LOADER_USER_HELPER] Firmware Drivers ---> [*] Export DMI identification via sysfs to userspace [CONFIG_DMIID] File systems ---> [*] Inotify support for userspace [CONFIG_INOTIFY_USER] <*> Kernel automounter version 4 support (also supports v3) [CONFIG_AUTOFS4_FS] Pseudo filesystems ---> [*] Tmpfs POSIX Access Control Lists [CONFIG_TMPFS_POSIX_ACL] [*] Tmpfs extended attributes [CONFIG_TMPFS_XATTR] Kernel hacking ---> Choose kernel unwinder (Frame pointer unwinder) ---> [CONFIG_UNWINDER_FRAME_POINTER]
8.如果您的主机硬件使用UEFI,请自行添加此项设置
Processor type and features ---> [*] EFI stub support [CONFIG_EFI_STUB]
9.设置调整完保存退出即可
10.编译内核映像和模块
make -j8
11.安装配置模块
make modules_install
12.复制一些内核的启动文件到boot分区
cp -iv arch/x86/boot/bzImage /boot/vmlinuz-4.18.5-lfs-8.3 cp -iv System.map /boot/System.map-4.18.5 cp -iv .config /boot/config-4.18.5
13.安装Linux内核的文档:
install -d /usr/share/doc/linux-4.18.5 cp -r Documentation/* /usr/share/doc/linux-4.18.5
14.配置linux模块加载顺序
install -v -m755 -d /etc/modprobe.d cat > /etc/modprobe.d/usb.conf << "EOF" # Begin /etc/modprobe.d/usb.conf install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i ohci_hcd ; true install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i uhci_hcd ; true # End /etc/modprobe.d/usb.conf EOF
15.返回sources目录并删除包目录
cd $LFS/sources
rm -rf linux-4.18.5
第8.4章节
安装配置grub引导
1.安装grub引导到MBR
grub-install /dev/sda
2.创建grub配置文件
cat > /boot/grub/grub.cfg << "EOF" # Begin /boot/grub/grub.cfg set default=0 set timeout=5 insmod ext2 set root=(hd0,2) 括号里面更改为你所安装lfs的分区或boot分区 例如/dev/sda2为(hd0,2) menuentry "GNU/Linux, Linux 4.18.5-lfs-8.3" { linux /boot/vmlinuz-4.18.5-lfs-8.3 root=/dev/sda2 ro(这里的/dev/sda2更改为你所安装lfs的分区号 例如/dev/sda2) } (如果boot单独分区,则把这里的/boot删除。)
EOF
多系统引导文件示例:
cat > /boot/grub/grub.cfg << "EOF"
# Begin /boot/grub/grub.cfg
set default=0
set timeout=5
menuentry "GNU/Linux, Linux 4.18.5-lfs-8.3" {
insmod ext2 set root=(hd0,5) linux /vmlinuz-4.18.5-lfs-8.3 root=/dev/sda6 ro } menuentry 'Manjaro Linux'{ insmod ext2 set root='hd0,msdos9' linux /vmlinuz-4.19-x86_64 root=/dev/sda10 ro initrd /intel-ucode.img /initramfs-4.19-x86_64.img } menuentry 'Windows 7 (on /dev/sda1)'{ insmod ntfs set root='hd0,msdos1' chainloader +1 } EOF
第9.1章节
设置系统版本及版本号
cat > /etc/os-release << "EOF" NAME="Linux From Scratch" VERSION="8.3-systemd" ID=lfs PRETTY_NAME="Linux From Scratch 8.3-systemd" VERSION_CODENAME="<your name here>"(括号里改为自己起的名字) EOF echo 8.3-systemd > /etc/lfs-release cat > /etc/lsb-release << "EOF" DISTRIB_ID="Linux From Scratch" DISTRIB_RELEASE="8.3-systemd" DISTRIB_CODENAME="<your name here>"(括号里改为自己起的名字) DISTRIB_DESCRIPTION="Linux From Scratch" EOF
第9.3章节
运行下面的命令,退出chroot,卸载lfs的分区
exit umount -v $LFS/dev/pts umount -v $LFS/dev umount -v $LFS/run umount -v $LFS/proc umount -v $LFS/sys umount -v $LFS umount -v $LFS/usr umount -v $LFS/home umount -v $LFS
重启进入lfs系统
reboot
附录
如果需要本机的grub引导lfs则在root用户下运行以下命令创建lfs的引导项
非manjaro系统需要安装os-prober软件包,并挂载lfs的分区,在运行下面命令,添加lfs的启动项
grub-mkconfig -o /boot/grub/grub.cfg
确定添加完lfs引导项后,重启机器进入lfs选项,即可进入lfs操作系统。
blfs(systemd版本)学习笔记的地址:https://www.cnblogs.com/renren-study-notes/p/10385413.html