【Request类型】
Request类型定义在request.go文件中，用于设置一个http请求来发送给服务端。
// A Request represents an HTTP request received by a server
// or to be sent by a client.
//
// The field semantics differ slightly between client and server
// usage. In addition to the notes on the fields below, see the
// documentation for Request.Write and RoundTripper.
type Request struct {
// Method specifies the HTTP method (GET, POST, PUT, etc.).
// For client requests an empty string means GET.
//
// Go's HTTP client does not support sending a request with
// the CONNECT method. See the documentation on Transport for
// details.
Method string
// URL specifies either the URI being requested (for server
// requests) or the URL to access (for client requests).
//
// For server requests the URL is parsed from the URI
// supplied on the Request-Line as stored in RequestURI. For
// most requests, fields other than Path and RawQuery will be
// empty. (See RFC 2616, Section 5.1.2)
//
// For client requests, the URL's Host specifies the server to
// connect to, while the Request's Host field optionally
// specifies the Host header value to send in the HTTP
// request.
URL *url.URL
// The protocol version for incoming server requests.
//
// For client requests these fields are ignored. The HTTP
// client code always uses either HTTP/1.1 or HTTP/2.
// See the docs on Transport for details.
Proto string // "HTTP/1.0"
ProtoMajor int // 1
ProtoMinor int // 0
// Header contains the request header fields either received
// by the server or to be sent by the client.
//
// If a server received a request with header lines,
//
// Host: example.com
// accept-encoding: gzip, deflate
// Accept-Language: en-us
// fOO: Bar
// foo: two
//
// then
//
// Header = map[string][]string{
// "Accept-Encoding": {"gzip, deflate"},
// "Accept-Language": {"en-us"},
// "Foo": {"Bar", "two"},
// }
//
// For incoming requests, the Host header is promoted to the
// Request.Host field and removed from the Header map.
//
// HTTP defines that header names are case-insensitive. The
// request parser implements this by using CanonicalHeaderKey,
// making the first character and any characters following a
// hyphen uppercase and the rest lowercase.
//
// For client requests, certain headers such as Content-Length
// and Connection are automatically written when needed and
// values in Header may be ignored. See the documentation
// for the Request.Write method.
Header Header
// Body is the request's body.
//
// For client requests a nil body means the request has no
// body, such as a GET request. The HTTP Client's Transport
// is responsible for calling the Close method.
//
// For server requests the Request Body is always non-nil
// but will return EOF immediately when no body is present.
// The Server will close the request body. The ServeHTTP
// Handler does not need to.
Body io.ReadCloser
// GetBody defines an optional func to return a new copy of
// Body. It is used for client requests when a redirect requires
// reading the body more than once. Use of GetBody still
// requires setting Body.
//
// For server requests it is unused.
GetBody func() (io.ReadCloser, error)
// ContentLength records the length of the associated content.
// The value -1 indicates that the length is unknown.
// Values >= 0 indicate that the given number of bytes may
// be read from Body.
// For client requests, a value of 0 with a non-nil Body is
// also treated as unknown.
ContentLength int64
// TransferEncoding lists the transfer encodings from outermost to
// innermost. An empty list denotes the "identity" encoding.
// TransferEncoding can usually be ignored; chunked encoding is
// automatically added and removed as necessary when sending and
// receiving requests.
TransferEncoding []string
// Close indicates whether to close the connection after
// replying to this request (for servers) or after sending this
// request and reading its response (for clients).
//
// For server requests, the HTTP server handles this automatically
// and this field is not needed by Handlers.
//
// For client requests, setting this field prevents re-use of
// TCP connections between requests to the same hosts, as if
// Transport.DisableKeepAlives were set.
Close bool
// For server requests Host specifies the host on which the
// URL is sought. Per RFC 2616, this is either the value of
// the "Host" header or the host name given in the URL itself.
// It may be of the form "host:port". For international domain
// names, Host may be in Punycode or Unicode form. Use
// golang.org/x/net/idna to convert it to either format if
// needed.
//
// For client requests Host optionally overrides the Host
// header to send. If empty, the Request.Write method uses
// the value of URL.Host. Host may contain an international
// domain name.
Host string
// Form contains the parsed form data, including both the URL
// field's query parameters and the POST or PUT form data.
// This field is only available after ParseForm is called.
// The HTTP client ignores Form and uses Body instead.
Form url.Values
// PostForm contains the parsed form data from POST, PATCH,
// or PUT body parameters.
//
// This field is only available after ParseForm is called.
// The HTTP client ignores PostForm and uses Body instead.
PostForm url.Values
// MultipartForm is the parsed multipart form, including file uploads.
// This field is only available after ParseMultipartForm is called.
// The HTTP client ignores MultipartForm and uses Body instead.
MultipartForm *multipart.Form
// Trailer specifies additional headers that are sent after the request
// body.
//
// For server requests the Trailer map initially contains only the
// trailer keys, with nil values. (The client declares which trailers it
// will later send.) While the handler is reading from Body, it must
// not reference Trailer. After reading from Body returns EOF, Trailer
// can be read again and will contain non-nil values, if they were sent
// by the client.
//
// For client requests Trailer must be initialized to a map containing
// the trailer keys to later send. The values may be nil or their final
// values. The ContentLength must be 0 or -1, to send a chunked request.
// After the HTTP request is sent the map values can be updated while
// the request body is read. Once the body returns EOF, the caller must
// not mutate Trailer.
//
// Few HTTP clients, servers, or proxies support HTTP trailers.
Trailer Header
// RemoteAddr allows HTTP servers and other software to record
// the network address that sent the request, usually for
// logging. This field is not filled in by ReadRequest and
// has no defined format. The HTTP server in this package
// sets RemoteAddr to an "IP:port" address before invoking a
// handler.
// This field is ignored by the HTTP client.
RemoteAddr string
// RequestURI is the unmodified Request-URI of the
// Request-Line (RFC 2616, Section 5.1) as sent by the client
// to a server. Usually the URL field should be used instead.
// It is an error to set this field in an HTTP client request.
RequestURI string
// TLS allows HTTP servers and other software to record
// information about the TLS connection on which the request
// was received. This field is not filled in by ReadRequest.
// The HTTP server in this package sets the field for
// TLS-enabled connections before invoking a handler;
// otherwise it leaves the field nil.
// This field is ignored by the HTTP client.
TLS *tls.ConnectionState
// Cancel is an optional channel whose closure indicates that the client
// request should be regarded as canceled. Not all implementations of
// RoundTripper may support Cancel.
//
// For server requests, this field is not applicable.
//
// Deprecated: Use the Context and WithContext methods
// instead. If a Request's Cancel field and context are both
// set, it is undefined whether Cancel is respected.
Cancel <-chan struct{}
// Response is the redirect response which caused this request
// to be created. This field is only populated during client
// redirects.
Response *Response
// ctx is either the client or server context. It should only
// be modified via copying the whole Request using WithContext.
// It is unexported to prevent people from using Context wrong
// and mutating the contexts held by callers of the same request.
ctx context.Context
}
常用的字段如下
Method string //Head,GET, POST, PUT等方法
URL *url.URL
Proto string // "HTTP/1.0"
ProtoMajor int // 1
ProtoMinor int // 0
Header Header //头部信息
Body io.ReadCloser //body
Host string
其中 Header Body等于Response类型中的是一致的。
【http.Get方法】
http.Get方法与http.Head方法在同一个文件中
实现了Client类型的Get方法源码如下,定义在client.go中
func (c *Client) Get(url string) (resp *Response, err error) {
req, err := NewRequest("GET", url, nil)
if err != nil {
return nil, err
}
return c.Do(req)
}
与http.Head 方法一样，调用了NewRequest()方法，只是传递的参数由“HEAD” 换成了“GET”。
NewRequest()的原型如下
func NewRequest(method, url string, body io.Reader) (*Request, error)
传入 一个http方法（GET、HEAD、POST等）、url及body,生成一个 Request数据类型，然后通过c.Do() 发送请求。c,Do返回Response类型数据。
【http.Get代码调用demo】
package main
import (
"fmt"
"net/http"
"net/http/httputil"
"os"
)
func main() {
url := "http://www.baidu.com"
response, err := http.Get(url)
checkErr(err)
if response.Status != "200 OK" {
fmt.Println(response.Status)
os.Exit(2)
}
b, _ := httputil.DumpResponse(response, false)
fmt.Println("#### b ####################")
fmt.Println(b)
fmt.Println("##### string(b) ###################")
fmt.Println(string(b))
fmt.Println("########################")
var buf [512]byte
reader := response.Body
for {
n, err := reader.Read(buf[0:])
if err != nil {
fmt.Println("err !=nil")
os.Exit(0)
}
fmt.Println("n is:", n)
fmt.Println(string(buf[0:n]))
os.Exit(0)
}
}
func checkErr(err error) {
if err != nil {
fmt.Println("Fatal err!", err.Error())
os.Exit(1)
}
}