RED HAT LINUX 9 架设WEB服务器TOMCAT和安装JAVA环境
流程
安装JDK,配置jdk
安装tomcat,配置tomcat
配置系统服务
配置开机启动
建立检测系统
配置80端口
配置系统开机启动服务
<!--[if !supportLists]-->一、<!--[endif]-->Linux上安装环境
1.1拷贝文件
jdk-1_5_0_19-linux-i586.rpm
apache-tomcat-5.5.29.tar.gz
放到/usr/local
1.2安装java环境
1.3安装web环境
1安装jdk
jdk-1_5_0_19-linux-i586.rpm
a.赋权限
chmod +x jdk-1_5_0_19-linux-i586.rpm
b.安装
rpm –ivh jdk-1_5_0_19-linux-i586.rpm
c 配置
执行后默认安装在usr/java文件夹下 //建立符号连接
Ln –s /usr/java/jdk-1_5_0_19 /usr/local/jdk1.5
d最后位置
/usr/local/jdk1.5
2.安装tomcat
apache-tomcat-5.5.29.tar.gz
a赋权:
chmod +x apache-tomcat-5.5.29.tar.gz
b安装
tar -xzvf apache-tomcat-5.5.29.tar.gz
c最后位置
/usr/local/apache-tomcat-5.5.29
3设置系统环境变量,编辑/etc/profile文件
Vi /etc/profile
在后面添加
JAVA_HOME=/usr/local/jdk1.5
CLASSPATH=.:$CLASSPATH:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:
$JAVA_HOME/jre/lib/rt.jar
CATALINA_BASE=/usr/local/apache-tomcat-5.5.29
CATALINA_HOME=/usr/local/apache-tomcat-5.5.29
PATH=$PATH:$JAVA_HOME/bin:$CATALINA_HOME/bin
export JAVA_HOME CLASSPATH CATALINA_BASE CATALINA_HOME PATH
unset i
保存
设置起效
Source /etc/profile
检验
Java –version
二.配置web服务器做为系统服务并开机启动
设置tomcat服务器开机启动使用jsvc将tomcat启动为Linux的一个进程
[root@tomcat ~]# cd /usr/local/ apache-tomcat-5.5.29/bin/
[root@tomcat bin]# tar -zxvf jsvc.tar.gz
[root@tomcat bin]# cd jsvc-src/
[root@tomcat jsvc-src]# chmod +x configure
[root@tomcat jsvc-src]# ./configure --with-java=/usr/local/jdk1.5
[root@tomcat jsvc-src]# make
#完成jsvc的编译
[root@tomcatjsvc-src]#cp/usr/local/apache-tomcat-5.5.29/bin/jsvc-src/native/Tomcat5.sh
/etc/rc.d/init.d/
#将生成的脚本复制到/etc/rc.d/init.d文件中
[root@tomcat jsvc-src]# cd /etc/rc.d/init.d/
[root@tomcat init.d]# chmod +x Tomcat5.sh 很重要
[root@tomcat init.d]# vi Tomcat5.sh
**************
#!/bin/sh
#chkconfig:2345 85 15
#description:Star and Stop the Tomcat daemon
##############################################################################
#
# Copyright 2004 The Apache Software Foundation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
##############################################################################
#
# Small shell script to show how to start/stop Tomcat using jsvc
# If you want to have Tomcat running on port 80 please modify the server.xml
# file:
#
# <!-- Define a non-SSL HTTP/1.1 Connector on port 80 -->
# <Connector className="org.apache.catalina.connector.http.HttpConnector"
# port="80" minProcessors="5" maxProcessors="75"
# enableLookups="true" redirectPort="8443"
# acceptCount="10" debug="0" connectionTimeout="60000"/>
#
# That is for Tomcat-5.0.x (Apache Tomcat/5.0)
#
# Adapt the following lines to your configuration
JAVA_HOME=/usr/local/jdk1.5
CATALINA_HOME=/usr/local/apache-tomcat-5.5.29
DAEMON_HOME=/usr/local/apache-tomcat-5.5.29/bin
TOMCAT_USER=root
# for multi instances adapt those lines.
TMP_DIR=/var/tmp
PID_FILE=/var/run/jsvc.pid #注意:将jsvc.pid复制到/var/run中
CATALINA_BASE=/usr/local/apache-tomcat-5.5.29
CATALINA_OPTS="-Djava.library.path=/home/jfclere/jakarta-tomcat-connectors/jni/native/.libs"
CLASSPATH=\
$JAVA_HOME/lib/tools.jar:\
$CATALINA_HOME/bin/commons-daemon.jar:\
$CATALINA_HOME/bin/bootstrap.jar
case "$1" in
start)
#
# Start Tomcat
#
$DAEMON_HOME/jsvc-src/jsvc \
-user $TOMCAT_USER \
-home $JAVA_HOME \
-Dcatalina.home=$CATALINA_HOME \
-Dcatalina.base=$CATALINA_BASE \
-Djava.io.tmpdir=$TMP_DIR \
-wait 10 \
-pidfile $PID_FILE \
-outfile $CATALINA_HOME/logs/catalina.out \
-errfile '&1' \
$CATALINA_OPTS \
-cp $CLASSPATH \
org.apache.catalina.startup.Bootstrap
#
# To get a verbose JVM
#-verbose \
# To get a debug of jsvc.
#-debug \
exit $?
;;
stop)
#
# Stop Tomcat
#
$DAEMON_HOME/jsvc-src/jsvc \
-stop \
-pidfile $PID_FILE \
org.apache.catalina.startup.Bootstrap
exit $?
;;
*)
echo "Usage tomcat.sh start/stop"
exit 1;;
esac
**************
修改后
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc0.d/K90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc1.d/K90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc2.d/S90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc3.d/S90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc4.d/S90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc5.d/S90Tomcat5.sh
[root@tomcat init.d]# ln -s /etc/init.d/Tomcat5.sh /etc/rc6.d/K95Tomcat5.sh
#为不同的运行基本建立启动和停止服务信息
测试tomcat启动脚本
[root@tomcat init.d]# /etc/rc.d/init.d/Tomcat5.sh start
#执行脚本启动tomcat服务
[root@tomcat init.d]# netstat -tnl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN
tcp 0 0 :::8009 :::* LISTEN
tcp 0 0 :::8080 :::* LISTEN
tcp 0 0 :::80 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
#查看服务状态
[root@tomcat init.d]# /etc/rc.d/init.d/Tomcat5.sh stop
[root@tomcat init.d]# netstat -tnl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN
tcp 0 0 :::80 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
#检测服务是否已经停止
将tomcat启动脚本注册为系统服务
服务安装完毕,添加到系统服务中去
chkconfig – -add Tomcat5.sh
chkconfig – -level 345 Tomcat5.sh on
自此软件环境安装完毕,系统启动会带动tomcat,并且能使用service指令操作tomcat开启停止
三.配置环境和配置tomcat
Server.xml ROOT catalina.sh tomcat-user.xml
配置80端口
配置直接输入IP转发
配置字符编码
配置内存大小
配置manager用户和密码
拷贝ROOT HVAC两个项目到webapp下
删除其他项目
<!--[if !supportLists]-->二、<!--[endif]-->安装必要的软件包
Tomcat能开机自动启动,但是需要监控是否运行正常
脚本+计划任务
Health.sh
********************
#!/bin/bash
#The WEB Server Status Check and Repair Script.
TMP=/tmp/health.html
HEALTH="WEBSERVEROK"
REQUEST_TOMCAT=http://127.0.0.1:80/health.html
LOGDATE="$(date +%F) $(date +%T) $CATALINA_HOME "
LOGFILE=/var/log/WebServer.log
export PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin:/usr/java/jdk1.5.0_19/bin:/usr/local/bin/
[ ! -f $LOGFILE ] && touch $LOGFILE
function Check_Status()
{
local RETRY=1
local SUCCESS=0
while [ $RETRY -le 3 ]; do
[ -f $TMP ] && rm -f $TMP
/usr/local/bin/curl -o $TMP $2 2>&1
sleep 2
STATUS=$(egrep -o "$HEALTH" $TMP)
if [ x$STATUS = x ]; then
echo "${LOGDATE}$1 check failure repeat $1 $RETRY times,repeat..." >> $LOGFILE
let RETRY=$RETRY+1
sleep 2
continue
fi
if [ $STATUS = "$HEALTH" ]; then
echo "${LOGDATE} $1 work fine!" >> $LOGFILE
SUCCESS=1
break
else
echo "${LOGDATE}$1 check failure repeat $1 $RETRY times,repeat..." >> $LOGFILE
let RETRY=$RETRY+1
sleep 2
fi
done
if [ $SUCCESS -eq 0 ]; then
let FC=$RETRY-1
echo "${LOGDATE} repeat $FC times $1 status failure,will restart $1!" >> $LOGFILE
RETURN=0
else
RETURN=1
fi
rm -f $TMP
}
Check_Status Tomcat $REQUEST_TOMCAT
if [ $RETURN -eq 0 ]; then
PID=$(ps -ef | grep tomcat| wc -l)
if [ $PID -gt 1 ]; then
echo "${LOGDATE} Tomcat is presence,kill them and restart..." >> $LOGFILE
HTTP_PID=$(ps -ef | grep tomcat| awk '{print $2}')
kill -9 $HTTP_PID > /dev/null 2>&1
sleep 5
service Tomcat5.sh start > /dev/null 2>&1
else
service Tomcat5.sh start > /dev/null 2>&1
fi
sleep 2
PID=$(ps -ef | grep tomcat | wc -l)
if [ $PID -gt 1 ]; then
echo "${LOGDATE} restart Tomcat success!" >> $LOGFILE
else
echo "${LOGDATE}restart Tomcat failure!" >> $LOGFILE
fi
fi
********************
思路:
所有这些都可以将配置文件复制粘贴到相对的位置,注意赋予权限。
<!--[if !supportLists]-->1.<!--[endif]-->使用linux计划任务
<!--[if !supportLists]-->2.<!--[endif]-->执行脚本 /home/oyl/health.sh,访问并下载web根目录下的health.html文件
<!--[if !supportLists]-->3.<!--[endif]-->如果下载的health.html文件包含设置文本,则说明tomcat运行正常
<!--[if !supportLists]-->4.<!--[endif]-->没有下载就表示tomcat运行不正常,此时无法确定tomcat是否是僵死还是停止
<!--[if !supportLists]-->5.<!--[endif]-->检查内存中是否存在,如果存在就全部杀死,然后启动,如果不存在就只是启动
<!--[if !supportLists]-->6.<!--[endif]-->将日志信息放到/var/log/WebServer.log
需要文件:
<!--[if !supportLists]-->1.<!--[endif]-->在webapp下的Root下放置health.html 被检测的文件
<!--[if !supportLists]-->2.<!--[endif]-->在/root/cron下放置health.sh 监控脚本文件
<!--[if !supportLists]-->3.<!--[endif]-->在/var/log/下会自动创建 WebServer.log 启动记录日志文件
<!--[if !supportLists]-->4.<!--[endif]-->会产生临时文件 /tmp/health.html 每次执行都会清空前一次的文件
<!--[if !supportLists]-->5.<!--[endif]-->需要下载linux的一个程序 curl-7.14.0.tar.gz
运行步骤:
<!--[if !supportLists]-->1.<!--[endif]-->安装 curl-7.14.0.tar.gz(如果系统自带安装了就无需安装,具体查看有没有安装,可以到 /usr/local/bin/curl 指令是否能正确显示)
<!--[if !supportLists]-->1 <!--[endif]-->#tar -zxvf curl-7.14.0.tar.gz
<!--[if !supportLists]-->2 <!--[endif]-->#cd curl-7.14.0/
<!--[if !supportLists]-->3 <!--[endif]-->#./configure
<!--[if !supportLists]-->4 <!--[endif]-->#make
<!--[if !supportLists]-->5 <!--[endif]-->#make test
<!--[if !supportLists]-->6 <!--[endif]-->#make install
<!--[if !supportLists]-->2.<!--[endif]-->复制文件health.html 到ROOT下面
<!--[if !supportLists]-->3.<!--[endif]-->复制文件health.sh 到root/cron/下
<!--[if !supportLists]-->4.<!--[endif]-->给脚本赋权限
<!--[if !supportLists]-->5.<!--[endif]-->定时计划任务添加该脚本一天执行一次
Crontab文件的每一行由六个域(minutes、hours、day of month、month、day of week、 command)组成,域之间用空格或Tab分开,其中:
minutes:分钟域,值的范围是0到59
hours:小时域,值的范围是0到23
day of month:日期,值的范围是1到31
month:月份,值的范围是1到12
day of week:星期,值的范围是0到6,星期日值为0
command:所要运行的命令
30 5 * * * /root/cron/health.sh
Curl在crond中执行有问题
问题解决:
环境变量的问题,我调用 curl指令,系统默认先从环境变量中查找该可执行文件,然后就是本文件夹下找,没有找到就无法执行,我是直接使用curl指令,在任务计划中,系统先去找curl的路径,没有找到就报错,后来,我就给curl添加绝对路径 /usr/local/bin/curl 竟然可以了,最后我将此路径放到脚本的PATH路径中
总结:分析问题要完整,如果a方测试不错,问题就出在b方,b方哪里出错?就通过排除法,将条件先删除,语句是否可以执行。
Linux 脚本编程首先都是确定环境变量,将所有要用到的指令的都添加到PATH路径下,执行一条指令,默认先从环境变量开始找,在从本文件夹下找,找不到就报错
需要用到的知识:
<!--[if !supportLists]-->1.<!--[endif]-->crontab Linux定时计划任务
<!--[if !supportLists]-->2.<!--[endif]-->Curl Linux 下载
<!--[if !supportLists]-->3.<!--[endif]-->Linux shell 编程
步骤:
<!--[if !supportLists]-->1.<!--[endif]-->Root 下创建文件夹cron
<!--[if !supportLists]-->2.<!--[endif]-->.复制health.sh 到root/cron 文件夹下
<!--[if !supportLists]-->3.<!--[endif]-->复制 curl的包 curl-7.14.0.tar.gz 到 /usr/local 下(可选)
<!--[if !supportLists]-->4.<!--[endif]-->复制health.html 到ROOT项目下(可选)
<!--[if !supportLists]-->5.<!--[endif]-->安装crul
<!--[if !supportLists]-->7 <!--[endif]-->#tar zxvf curl-7.14.0.tar.gz
<!--[if !supportLists]-->8 <!--[endif]-->#cd curl-7.14.0/
<!--[if !supportLists]-->9 <!--[endif]-->#./configure
<!--[if !supportLists]-->10 <!--[endif]-->#make
<!--[if !supportLists]-->11 <!--[endif]-->#make test
<!--[if !supportLists]-->12 <!--[endif]-->#make install
6给health.sh 赋权 chmod +x health.sh
7添加计划执行 crontab -e
会打开一个文档,输入内容: 30 5 * * * /root/cron/health.sh
8重启crond service crond restart
至此 tomcat监控已经完成
三、数据库方面
mysql必备用户localhost.localdomain 这个用户,并且要对OYLTDB_HVAC有增删改查的权限
<!--[if !supportLists]-->四、<!--[endif]-->其他
项目中使用ssh 登录需要用户名和密码,否则无法修改系统时间
Linux :root oyltszrd
项目更新:hvacapp hvacgengxin
项目登录:admin admin
总结:
运行的程序
升级 采用tomcat manager 控制台热部署发布新程序,执行流程为停止,卸载,上传
修改Linux系统时间,采用java 执行ssh 操作,执行Linux指令直接执行,需要第三方包
局部刷新,使用dwr实现ajax功能,局部定时刷新,并使用dwr插入数据到库
数据无闪动的原理:判断显示数据的表格内有没有数据,第一次加载则创建所有页面元素,后面次数则是替换数据,
定时器延时,操作定时器,当用户将要操作时,停止当前定时器,开启新的定时器,15s过后,关闭当前新的定时器,开启旧的定时器
管理员登录判断,采用filter过滤器实现,判断该操作是否登录没有则直接转到登录页面
数据访问层,查询技术采用离线查询,可以在任一session中执行,增删改则是采用spring事务管理,面向方面编程
表示层技术:
样式,特效采用 javascript ,css ,显示数据采用jquery,dwr,struts标签
中间层技术:
Spring 依赖注入,声明式事务处理,编写baseservice,其他继承基类,业务层所有依赖注入可以在此类执行
数据访问层技术:
Hibernate,编写basedao ,其他继承基类,依赖注入只需在此类执行
数据库连接:
采用hibernate +proxool数据库连接池方式,避免mysql数据库8小时断开连接,而且可以收回空闲连接
日志记录:
Log4j,基本上在开发期间有用
异常处理:
Try catch 捕获异常往上面,跳转到异常页面,抓好表示层录入数据
要执行Linux指令必须要是root权利,所以用户名和密码不能变
服务器配置
Ip直接访问,随系统启动,每天检测一次是否正常
网上大多数的配置环境是apache+tomcat+jk1模式这种方式,但这是针对大型或中小型网站设计的,本应用无需应对网络所有用户,只需在局域网内部使用,因此使用tomcat就可以了
Tomcat的 server.xml需要配置,端口号,虚拟内存,
当然还要配置 tomcat-users.xml 这样可以添加对tomcat的访问权限
最好是直接替换server.xml