Myeclipse在启动tomcat的时候自动跳到debug的解决方法

版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/fz121800/article/details/78816644

1,打开Myeclipse依次window-->preferences-->Myeclipse--.>Servers-->Tomcat然后找到你的相应的tomcat的版本,选中展开下面的菜单还会发现有个Launch选项,选中,在右侧tomcat launch mode中选中Run mode 然后Apply,最后点击OK就行了,

2,在myeclipse中找到 preference-java-debug suspend execution里面,把suspend execution  on uncaught exceotion勾掉. 。然后重启myecilpse.


以上是学习经验,仅供参考,如果还是不行,,那就等死吧

猜你喜欢

转载自blog.csdn.net/fz121800/article/details/78816644
今日推荐