1、安装redis
第一步:yum安装gcc依赖
yum install gcc
[root@iz2zegjgc0qhkhs61w2tqnz ~]# yum install gcc
遇到选择,输入y即可
第二步:下载redis安装包
进入local文件夹
cd /usr/local
wget http://download.redis.io/releases/redis-4.0.6.tar.gz
[root@iz2zegjgc0qhkhs61w2tqnz local]# wget http://download.redis.io/releases/redis-4.0.6.tar.gz
--2017-12-13 12:35:12-- http://download.redis.io/releases/redis-4.0.6.tar.gz
Resolving download.redis.io (download.redis.io)... 109.74.203.151
Connecting to download.redis.io (download.redis.io)|109.74.203.151|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1723533 (1.6M) [application/x-gzip]
Saving to: ‘redis-4.0.6.tar.gz’
100%[==========================================================================================================>] 1,723,533 608KB/s in 2.8s
2017-12-13 12:35:15 (608 KB/s) - ‘redis-4.0.6.tar.gz’ saved [1723533/1723533]
第三步:解压压缩包
tar -zxvf redis-4.0.6.tar.gz
[root@iz2zegjgc0qhkhs61w2tqnz local]# tar -zxvf redis-4.0.6.tar.gz
第四步:进入redis解压目录
cd redis-4.0.6
第五步:编译安装
make MALLOC=libc
[root@iz2zegjgc0qhkhs61w2tqnz redis-4.0.6]# make MALLOC=libc
将/usr/local/redis-4.0.6/src目录下的文件加到/usr/local/bin目录
cd src && make install
[root@iz2zegjgc0qhkhs61w2tqnz redis-4.0.6]# cd src && make install
CC Makefile.dep
Hint: It's a good idea to run 'make test' ;)
INSTALL install
INSTALL install
INSTALL install
INSTALL install
INSTALL install
第六步:测试是否安装成功
切换到redis src目录下
[root@iz2zegjgc0qhkhs61w2tqnz redis-4.0.6]# cd src
1、直接启动redis
./redis-server
[root@iz2zegjgc0qhkhs61w2tqnz src]# ./redis-server
18685:C 13 Dec 12:56:12.507 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
18685:C 13 Dec 12:56:12.507 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=18685, just started
18685:C 13 Dec 12:56:12.507 # Warning: no config file specified, using the default config. In order to specify a config file use ./redis-server /path/to/redis.conf
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 4.0.6 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 18685
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
18685:M 13 Dec 12:56:12.508 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
18685:M 13 Dec 12:56:12.508 # Server initialized
18685:M 13 Dec 12:56:12.508 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
18685:M 13 Dec 12:56:12.508 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
18685:M 13 Dec 12:56:12.508 * Ready to accept connections
如上图:redis启动成功,但是这种启动方式需要一直打开窗口,不能进行其他操作,不太方便。
按 ctrl + c可以关闭窗口。
2、以后台进程方式启动redis
第一步:修改redis.conf文件
进入redis-4.0.6文件夹修改redis.conf
在之前的基础上 cd ..
vim redis.conf
首先介绍几个属性配置
bind 127.0.0.1
是只有本机可以使用,注释掉就可以任意ip访问,也可以上线后指定自己服务器的ip
daemonize no
默认不是守护进程方式运行,这里修改成yes,启动会以后台守护线程启动,就是启动时候不会出现redis图了
禁用保护模式
何谓保护模式?
redis是因为保护模式是启用保护模式运行,没有指定绑定地址,没有密码要求的客户。在这种模式下,连接只接受环回接口。如果你想连接外部计算机使用您可以通过下面的一个解决方案:1)只禁用保护模式发送命令的配置设置保护模式没有从环回接口通过从同一主机运行的服务器连接到redis,但是确保如果你不公开访问redis来自互联网。使用配置重写使此更改永久。2)或者你可以仅仅通过编辑redis配置文件禁用保护模式,并设置保护模式选择“否”,然后重新启动服务器。3)如果您只是为了测试而手动启动服务器,则用“保护模式NO”选项重新启动它。4)设置绑定地址或身份验证密码。注意:您只需要做上面的其中一件事情,以便服务器开始接受来自外部的连接。
解决方案:设置密码,或者远程连接的ip
已上,我们可以关闭保护模式
protected-mode no
也可以修改密码
requirepass 123456
vim中搜索 进入到文件中 /你要搜索的词 enter
第二步:指定redis.conf文件启动
./redis-server /usr/local/redis-4.0.6/redis.conf
[root@iz2zegjgc0qhkhs61w2tqnz src]# ./redis-server /usr/local/redis-4.0.6/redis.conf
18713:C 13 Dec 13:07:41.109 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
18713:C 13 Dec 13:07:41.109 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=18713, just started
18713:C 13 Dec 13:07:41.109 # Configuration loaded
第三步:关闭redis进程
首先使用ps -aux | grep redis查看redis进程
[root@iz2zegjgc0qhkhs61w2tqnz src]# ps -aux | grep redis
root 4028 0.0 0.1 141752 2008 ? Ssl 13:07 0:00 ./redis-server 127.0.0.1:6379
root 18719 0.0 0.0 112644 968 pts/0 R+ 13:09 0:00 grep --color=auto redis
使用kill命令杀死进程
[root@iz2zegjgc0qhkhs61w2tqnz src]# kill -9 4028
第七步:设置redis开机自启动
1、在/etc目录下新建redis目录
mkdir redis
[root@iz2zegjgc0qhkhs61w2tqnz etc]# mkdir redis
2、将/usr/local/redis-4.0.6/redis.conf 文件复制一份到/etc/redis目录下,并命名为6379.conf
[root@iz2zegjgc0qhkhs61w2tqnz redis]# cp /usr/local/redis-4.0.6/redis.conf /etc/redis/6379.conf
3、将redis的启动脚本复制一份放到/etc/init.d目录下
[root@iz2zegjgc0qhkhs61w2tqnz init.d]# cp /usr/local/redis-4.0.6/utils/redis_init_script /etc/init.d/redisd
4、设置redis开机自启动
先切换到/etc/init.d目录下
然后执行自启命令
[root@iz2zegjgc0qhkhs61w2tqnz init.d]# chkconfig redisd on
service redisd does not support chkconfig
解决方法:看结果是redisd不支持chkconfig
使用vim编辑redisd文件,在第一行加入如下两行注释,保存退出
# chkconfig: 2345 90 10
# description: Redis is a persistent key-value database
注释的意思是,redis服务必须在运行级2,3,4,5下被启动或关闭,启动的优先级是90,关闭的优先级是10。
再次执行开机自启命令,成功
[root@iz2zegjgc0qhkhs61w2tqnz init.d]# chkconfig redisd on
现在可以直接已服务的形式启动和关闭redis了
启动:
service redisd start
[root@iz2zegjgc0qhkhs61w2tqnz ~]# service redisd start
Starting Redis server...
2288:C 13 Dec 13:51:38.087 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
2288:C 13 Dec 13:51:38.087 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=2288, just started
2288:C 13 Dec 13:51:38.087 # Configuration loaded
关闭:
service redisd stop
[root@iz2zegjgc0qhkhs61w2tqnz ~]# service redisd stop
Stopping ...
Redis stopped
如果出现如下问题:
[root@iz2zegjgc0qhkhs61w2tqnz ~]# service redisd start
/var/run/redis_6379.pid exists, process is already running or crashed
就去/var/run/ 删除掉redis_6379.pid
再次执行
service redisd start
参考资料:
1. https://blog.csdn.net/weixin_40760196/article/details/81231970