HttpServlet是用Http协议实现的Servlet的基础类，写Servlet时直接继承他就可以了，不需要再从头实现Servlet接口，Springmvc中的DispatchServlet就是继承的HttpServlet。既然HttpServlet是跟协议相关的，当然主要关心的是如何处理请求了，所以HttpServlet主要重写了service方法。在service方法中首先将ServletRequest和ServletResponse转换为HttpServletRequest和HpptServletResponse，然后根据Http请求的类型不同将请求发送到不同的处理方法。
public void service(ServletRequest req, ServletResponse res)
throws ServletException, IOException
{
HttpServletRequest request;
HttpServletResponse response;
if (!(req instanceof HttpServletRequest &&
res instanceof HttpServletResponse)) {
throw new ServletException("non-HTTP request or response");
}
request = (HttpServletRequest) req;
response = (HttpServletResponse) res;
service(request, response);
}
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String method = req.getMethod();
if (method.equals(METHOD_GET)) {
long lastModified = getLastModified(req);
if (lastModified == -1) {
// servlet doesn't support if-modified-since, no reason
// to go through further expensive logic
doGet(req, resp);
} else {
long ifModifiedSince = req.getDateHeader(HEADER_IFMODSINCE);
if (ifModifiedSince < lastModified) {
// If the servlet mod time is later, call doGet()
// Round down to the nearest second for a proper compare
// A ifModifiedSince of -1 will always be less
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else {
resp.setStatus(HttpServletResponse.SC_NOT_MODIFIED);
}
}
} else if (method.equals(METHOD_HEAD)) {
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else if (method.equals(METHOD_POST)) {
doPost(req, resp);
} else if (method.equals(METHOD_PUT)) {
doPut(req, resp);
} else if (method.equals(METHOD_DELETE)) {
doDelete(req, resp);
} else if (method.equals(METHOD_OPTIONS)) {
doOptions(req,resp);
} else if (method.equals(METHOD_TRACE)) {
doTrace(req,resp);
} else {
//
// Note that this means NO servlet supports whatever
// method was requested, anywhere on this server.
//
String errMsg = lStrings.getString("http.method_not_implemented");
Object[] errArgs = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(HttpServletResponse.SC_NOT_IMPLEMENTED, errMsg);
}
}具体处理方法是doXXX的结构，如最常用的doGet、doPost就是在这里定义的。doGet、doPost和doDelete方法都是模板方法，而且如果子类没有实现将抛出异常，在调用doGet方法前还对是否过期做了检查，如果没有过期则直接返回304状态码使用缓存；doHead调用了doGet的请求，然后返回body的Response；doOptions和doTrace正常不需要使用，主要是用来做一些调试工作，doOptions返回所有支持的处理类型的集合，正常情况下可以禁用，doTrace是用来远程诊断服务器的，塔尖接收到的header原封不动的返回，这种做法很可能会被黑客利用，存在安全漏洞，所以如果不是必须使用，最好禁用。由于doOptions和doTrace的功能非常固定，所以HttpServlet做了默认的实现。doGet代码如下（doPost、doPut、doDelete与之类似）：
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String protocol = req.getProtocol();
String msg = lStrings.getString("http.method_get_not_supported");
if (protocol.endsWith("1.1")) {
resp.sendError(HttpServletResponse.SC_METHOD_NOT_ALLOWED, msg);
} else {
resp.sendError(HttpServletResponse.SC_BAD_REQUEST, msg);
}
}HttpServlet源码：
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2011 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*
*
* This file incorporates work covered by the following copyright and
* permission notice:
*
* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package javax.servlet.http;
import java.io.IOException;
import java.io.PrintWriter;
import java.io.OutputStreamWriter;
import java.io.UnsupportedEncodingException;
import java.lang.reflect.Method;
import java.text.MessageFormat;
import java.util.Enumeration;
import java.util.Locale;
import java.util.ResourceBundle;
import javax.servlet.GenericServlet;
import javax.servlet.ServletException;
import javax.servlet.ServletOutputStream;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
/**
*
* Provides an abstract class to be subclassed to create
* an HTTP servlet suitable for a Web site. A subclass of
* <code>HttpServlet</code> must override at least
* one method, usually one of these:
*
* <ul>
* <li> <code>doGet</code>, if the servlet supports HTTP GET requests
* <li> <code>doPost</code>, for HTTP POST requests
* <li> <code>doPut</code>, for HTTP PUT requests
* <li> <code>doDelete</code>, for HTTP DELETE requests
* <li> <code>init</code> and <code>destroy</code>,
* to manage resources that are held for the life of the servlet
* <li> <code>getServletInfo</code>, which the servlet uses to
* provide information about itself
* </ul>
*
* <p>There's almost no reason to override the <code>service</code>
* method. <code>service</code> handles standard HTTP
* requests by dispatching them to the handler methods
* for each HTTP request type (the <code>do</code><i>XXX</i>
* methods listed above).
*
* <p>Likewise, there's almost no reason to override the
* <code>doOptions</code> and <code>doTrace</code> methods.
*
* <p>Servlets typically run on multithreaded servers,
* so be aware that a servlet must handle concurrent
* requests and be careful to synchronize access to shared resources.
* Shared resources include in-memory data such as
* instance or class variables and external objects
* such as files, database connections, and network
* connections.
* See the
* <a href="http://java.sun.com/Series/Tutorial/java/threads/multithreaded.html">
* Java Tutorial on Multithreaded Programming</a> for more
* information on handling multiple threads in a Java program.
*
* @author Various
*/
public abstract class HttpServlet extends GenericServlet
{
private static final String METHOD_DELETE = "DELETE";
private static final String METHOD_HEAD = "HEAD";
private static final String METHOD_GET = "GET";
private static final String METHOD_OPTIONS = "OPTIONS";
private static final String METHOD_POST = "POST";
private static final String METHOD_PUT = "PUT";
private static final String METHOD_TRACE = "TRACE";
private static final String HEADER_IFMODSINCE = "If-Modified-Since";
private static final String HEADER_LASTMOD = "Last-Modified";
private static final String LSTRING_FILE =
"javax.servlet.http.LocalStrings";
private static ResourceBundle lStrings =
ResourceBundle.getBundle(LSTRING_FILE);
/**
* Does nothing, because this is an abstract class.
*
*/
public HttpServlet() { }
/**
*
* Called by the server (via the <code>service</code> method) to
* allow a servlet to handle a GET request.
*
* <p>Overriding this method to support a GET request also
* automatically supports an HTTP HEAD request. A HEAD
* request is a GET request that returns no body in the
* response, only the request header fields.
*
* <p>When overriding this method, read the request data,
* write the response headers, get the response's writer or
* output stream object, and finally, write the response data.
* It's best to include content type and encoding. When using
* a <code>PrintWriter</code> object to return the response,
* set the content type before accessing the
* <code>PrintWriter</code> object.
*
* <p>The servlet container must write the headers before
* committing the response, because in HTTP the headers must be sent
* before the response body.
*
* <p>Where possible, set the Content-Length header (with the
* {@link javax.servlet.ServletResponse#setContentLength} method),
* to allow the servlet container to use a persistent connection
* to return its response to the client, improving performance.
* The content length is automatically set if the entire response fits
* inside the response buffer.
*
* <p>When using HTTP 1.1 chunked encoding (which means that the response
* has a Transfer-Encoding header), do not set the Content-Length header.
*
* <p>The GET method should be safe, that is, without
* any side effects for which users are held responsible.
* For example, most form queries have no side effects.
* If a client request is intended to change stored data,
* the request should use some other HTTP method.
*
* <p>The GET method should also be idempotent, meaning
* that it can be safely repeated. Sometimes making a
* method safe also makes it idempotent. For example,
* repeating queries is both safe and idempotent, but
* buying a product online or modifying data is neither
* safe nor idempotent.
*
* <p>If the request is incorrectly formatted, <code>doGet</code>
* returns an HTTP "Bad Request" message.
*
* @param req an {@link HttpServletRequest} object that
* contains the request the client has made
* of the servlet
*
* @param resp an {@link HttpServletResponse} object that
* contains the response the servlet sends
* to the client
*
* @exception IOException if an input or output error is
* detected when the servlet handles
* the GET request
*
* @exception ServletException if the request for the GET
* could not be handled
*
* @see javax.servlet.ServletResponse#setContentType
*/
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String protocol = req.getProtocol();
String msg = lStrings.getString("http.method_get_not_supported");
if (protocol.endsWith("1.1")) {
resp.sendError(HttpServletResponse.SC_METHOD_NOT_ALLOWED, msg);
} else {
resp.sendError(HttpServletResponse.SC_BAD_REQUEST, msg);
}
}
/**
*
* Returns the time the <code>HttpServletRequest</code>
* object was last modified,
* in milliseconds since midnight January 1, 1970 GMT.
* If the time is unknown, this method returns a negative
* number (the default).
*
* <p>Servlets that support HTTP GET requests and can quickly determine
* their last modification time should override this method.
* This makes browser and proxy caches work more effectively,
* reducing the load on server and network resources.
*
* @param req the <code>HttpServletRequest</code>
* object that is sent to the servlet
*
* @return a <code>long</code> integer specifying
* the time the <code>HttpServletRequest</code>
* object was last modified, in milliseconds
* since midnight, January 1, 1970 GMT, or
* -1 if the time is not known
*/
protected long getLastModified(HttpServletRequest req) {
return -1;
}
/**
*
*
* <p>Receives an HTTP HEAD request from the protected
* <code>service</code> method and handles the
* request.
* The client sends a HEAD request when it wants
* to see only the headers of a response, such as
* Content-Type or Content-Length. The HTTP HEAD
* method counts the output bytes in the response
* to set the Content-Length header accurately.
*
* <p>If you override this method, you can avoid computing
* the response body and just set the response headers
* directly to improve performance. Make sure that the
* <code>doHead</code> method you write is both safe
* and idempotent (that is, protects itself from being
* called multiple times for one HTTP HEAD request).
*
* <p>If the HTTP HEAD request is incorrectly formatted,
* <code>doHead</code> returns an HTTP "Bad Request"
* message.
*
* @param req the request object that is passed to the servlet
*
* @param resp the response object that the servlet
* uses to return the headers to the clien
*
* @exception IOException if an input or output error occurs
*
* @exception ServletException if the request for the HEAD
* could not be handled
*/
protected void doHead(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
NoBodyResponse response = new NoBodyResponse(resp);
doGet(req, response);
response.setContentLength();
}
/**
*
* Called by the server (via the <code>service</code> method)
* to allow a servlet to handle a POST request.
*
* The HTTP POST method allows the client to send
* data of unlimited length to the Web server a single time
* and is useful when posting information such as
* credit card numbers.
*
* <p>When overriding this method, read the request data,
* write the response headers, get the response's writer or output
* stream object, and finally, write the response data. It's best
* to include content type and encoding. When using a
* <code>PrintWriter</code> object to return the response, set the
* content type before accessing the <code>PrintWriter</code> object.
*
* <p>The servlet container must write the headers before committing the
* response, because in HTTP the headers must be sent before the
* response body.
*
* <p>Where possible, set the Content-Length header (with the
* {@link javax.servlet.ServletResponse#setContentLength} method),
* to allow the servlet container to use a persistent connection
* to return its response to the client, improving performance.
* The content length is automatically set if the entire response fits
* inside the response buffer.
*
* <p>When using HTTP 1.1 chunked encoding (which means that the response
* has a Transfer-Encoding header), do not set the Content-Length header.
*
* <p>This method does not need to be either safe or idempotent.
* Operations requested through POST can have side effects for
* which the user can be held accountable, for example,
* updating stored data or buying items online.
*
* <p>If the HTTP POST request is incorrectly formatted,
* <code>doPost</code> returns an HTTP "Bad Request" message.
*
*
* @param req an {@link HttpServletRequest} object that
* contains the request the client has made
* of the servlet
*
* @param resp an {@link HttpServletResponse} object that
* contains the response the servlet sends
* to the client
*
* @exception IOException if an input or output error is
* detected when the servlet handles
* the request
*
* @exception ServletException if the request for the POST
* could not be handled
*
* @see javax.servlet.ServletOutputStream
* @see javax.servlet.ServletResponse#setContentType
*/
protected void doPost(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String protocol = req.getProtocol();
String msg = lStrings.getString("http.method_post_not_supported");
if (protocol.endsWith("1.1")) {
resp.sendError(HttpServletResponse.SC_METHOD_NOT_ALLOWED, msg);
} else {
resp.sendError(HttpServletResponse.SC_BAD_REQUEST, msg);
}
}
/**
* Called by the server (via the <code>service</code> method)
* to allow a servlet to handle a PUT request.
*
* The PUT operation allows a client to
* place a file on the server and is similar to
* sending a file by FTP.
*
* <p>When overriding this method, leave intact
* any content headers sent with the request (including
* Content-Length, Content-Type, Content-Transfer-Encoding,
* Content-Encoding, Content-Base, Content-Language, Content-Location,
* Content-MD5, and Content-Range). If your method cannot
* handle a content header, it must issue an error message
* (HTTP 501 - Not Implemented) and discard the request.
* For more information on HTTP 1.1, see RFC 2616
* <a href="http://www.ietf.org/rfc/rfc2616.txt"></a>.
*
* <p>This method does not need to be either safe or idempotent.
* Operations that <code>doPut</code> performs can have side
* effects for which the user can be held accountable. When using
* this method, it may be useful to save a copy of the
* affected URL in temporary storage.
*
* <p>If the HTTP PUT request is incorrectly formatted,
* <code>doPut</code> returns an HTTP "Bad Request" message.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
* @param resp the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* PUT request
*
* @exception ServletException if the request for the PUT
* cannot be handled
*/
protected void doPut(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String protocol = req.getProtocol();
String msg = lStrings.getString("http.method_put_not_supported");
if (protocol.endsWith("1.1")) {
resp.sendError(HttpServletResponse.SC_METHOD_NOT_ALLOWED, msg);
} else {
resp.sendError(HttpServletResponse.SC_BAD_REQUEST, msg);
}
}
/**
* Called by the server (via the <code>service</code> method)
* to allow a servlet to handle a DELETE request.
*
* The DELETE operation allows a client to remove a document
* or Web page from the server.
*
* <p>This method does not need to be either safe
* or idempotent. Operations requested through
* DELETE can have side effects for which users
* can be held accountable. When using
* this method, it may be useful to save a copy of the
* affected URL in temporary storage.
*
* <p>If the HTTP DELETE request is incorrectly formatted,
* <code>doDelete</code> returns an HTTP "Bad Request"
* message.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
* @param resp the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* DELETE request
*
* @exception ServletException if the request for the
* DELETE cannot be handled
*/
protected void doDelete(HttpServletRequest req,
HttpServletResponse resp)
throws ServletException, IOException
{
String protocol = req.getProtocol();
String msg = lStrings.getString("http.method_delete_not_supported");
if (protocol.endsWith("1.1")) {
resp.sendError(HttpServletResponse.SC_METHOD_NOT_ALLOWED, msg);
} else {
resp.sendError(HttpServletResponse.SC_BAD_REQUEST, msg);
}
}
private Method[] getAllDeclaredMethods(Class<?> c) {
if (c.equals(javax.servlet.http.HttpServlet.class)) {
return null;
}
Method[] parentMethods = getAllDeclaredMethods(c.getSuperclass());
Method[] thisMethods = c.getDeclaredMethods();
if ((parentMethods != null) && (parentMethods.length > 0)) {
Method[] allMethods =
new Method[parentMethods.length + thisMethods.length];
System.arraycopy(parentMethods, 0, allMethods, 0,
parentMethods.length);
System.arraycopy(thisMethods, 0, allMethods, parentMethods.length,
thisMethods.length);
thisMethods = allMethods;
}
return thisMethods;
}
/**
* Called by the server (via the <code>service</code> method)
* to allow a servlet to handle a OPTIONS request.
*
* The OPTIONS request determines which HTTP methods
* the server supports and
* returns an appropriate header. For example, if a servlet
* overrides <code>doGet</code>, this method returns the
* following header:
*
* <p><code>Allow: GET, HEAD, TRACE, OPTIONS</code>
*
* <p>There's no need to override this method unless the
* servlet implements new HTTP methods, beyond those
* implemented by HTTP 1.1.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
* @param resp the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* OPTIONS request
*
* @exception ServletException if the request for the
* OPTIONS cannot be handled
*/
protected void doOptions(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
Method[] methods = getAllDeclaredMethods(this.getClass());
boolean ALLOW_GET = false;
boolean ALLOW_HEAD = false;
boolean ALLOW_POST = false;
boolean ALLOW_PUT = false;
boolean ALLOW_DELETE = false;
boolean ALLOW_TRACE = true;
boolean ALLOW_OPTIONS = true;
for (int i=0; i<methods.length; i++) {
Method m = methods[i];
if (m.getName().equals("doGet")) {
ALLOW_GET = true;
ALLOW_HEAD = true;
}
if (m.getName().equals("doPost"))
ALLOW_POST = true;
if (m.getName().equals("doPut"))
ALLOW_PUT = true;
if (m.getName().equals("doDelete"))
ALLOW_DELETE = true;
}
String allow = null;
if (ALLOW_GET)
allow=METHOD_GET;
if (ALLOW_HEAD)
if (allow==null) allow=METHOD_HEAD;
else allow += ", " + METHOD_HEAD;
if (ALLOW_POST)
if (allow==null) allow=METHOD_POST;
else allow += ", " + METHOD_POST;
if (ALLOW_PUT)
if (allow==null) allow=METHOD_PUT;
else allow += ", " + METHOD_PUT;
if (ALLOW_DELETE)
if (allow==null) allow=METHOD_DELETE;
else allow += ", " + METHOD_DELETE;
if (ALLOW_TRACE)
if (allow==null) allow=METHOD_TRACE;
else allow += ", " + METHOD_TRACE;
if (ALLOW_OPTIONS)
if (allow==null) allow=METHOD_OPTIONS;
else allow += ", " + METHOD_OPTIONS;
resp.setHeader("Allow", allow);
}
/**
* Called by the server (via the <code>service</code> method)
* to allow a servlet to handle a TRACE request.
*
* A TRACE returns the headers sent with the TRACE
* request to the client, so that they can be used in
* debugging. There's no need to override this method.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
*
* @param resp the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* TRACE request
*
* @exception ServletException if the request for the
* TRACE cannot be handled
*/
protected void doTrace(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
int responseLength;
String CRLF = "\r\n";
StringBuilder buffer = new StringBuilder("TRACE ").append(req.getRequestURI())
.append(" ").append(req.getProtocol());
Enumeration<String> reqHeaderEnum = req.getHeaderNames();
while( reqHeaderEnum.hasMoreElements() ) {
String headerName = reqHeaderEnum.nextElement();
buffer.append(CRLF).append(headerName).append(": ")
.append(req.getHeader(headerName));
}
buffer.append(CRLF);
responseLength = buffer.length();
resp.setContentType("message/http");
resp.setContentLength(responseLength);
ServletOutputStream out = resp.getOutputStream();
out.print(buffer.toString());
}
/**
* Receives standard HTTP requests from the public
* <code>service</code> method and dispatches
* them to the <code>do</code><i>XXX</i> methods defined in
* this class. This method is an HTTP-specific version of the
* {@link javax.servlet.Servlet#service} method. There's no
* need to override this method.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
* @param resp the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* HTTP request
*
* @exception ServletException if the HTTP request
* cannot be handled
*
* @see javax.servlet.Servlet#service
*/
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
{
String method = req.getMethod();
if (method.equals(METHOD_GET)) {
long lastModified = getLastModified(req);
if (lastModified == -1) {
// servlet doesn't support if-modified-since, no reason
// to go through further expensive logic
doGet(req, resp);
} else {
long ifModifiedSince = req.getDateHeader(HEADER_IFMODSINCE);
if (ifModifiedSince < lastModified) {
// If the servlet mod time is later, call doGet()
// Round down to the nearest second for a proper compare
// A ifModifiedSince of -1 will always be less
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else {
resp.setStatus(HttpServletResponse.SC_NOT_MODIFIED);
}
}
} else if (method.equals(METHOD_HEAD)) {
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else if (method.equals(METHOD_POST)) {
doPost(req, resp);
} else if (method.equals(METHOD_PUT)) {
doPut(req, resp);
} else if (method.equals(METHOD_DELETE)) {
doDelete(req, resp);
} else if (method.equals(METHOD_OPTIONS)) {
doOptions(req,resp);
} else if (method.equals(METHOD_TRACE)) {
doTrace(req,resp);
} else {
//
// Note that this means NO servlet supports whatever
// method was requested, anywhere on this server.
//
String errMsg = lStrings.getString("http.method_not_implemented");
Object[] errArgs = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(HttpServletResponse.SC_NOT_IMPLEMENTED, errMsg);
}
}
/*
* Sets the Last-Modified entity header field, if it has not
* already been set and if the value is meaningful. Called before
* doGet, to ensure that headers are set before response data is
* written. A subclass might have set this header already, so we
* check.
*/
private void maybeSetLastModified(HttpServletResponse resp,
long lastModified) {
if (resp.containsHeader(HEADER_LASTMOD))
return;
if (lastModified >= 0)
resp.setDateHeader(HEADER_LASTMOD, lastModified);
}
/**
* Dispatches client requests to the protected
* <code>service</code> method. There's no need to
* override this method.
*
* @param req the {@link HttpServletRequest} object that
* contains the request the client made of
* the servlet
*
* @param res the {@link HttpServletResponse} object that
* contains the response the servlet returns
* to the client
*
* @exception IOException if an input or output error occurs
* while the servlet is handling the
* HTTP request
*
* @exception ServletException if the HTTP request cannot
* be handled
*
* @see javax.servlet.Servlet#service
*/
public void service(ServletRequest req, ServletResponse res)
throws ServletException, IOException
{
HttpServletRequest request;
HttpServletResponse response;
if (!(req instanceof HttpServletRequest &&
res instanceof HttpServletResponse)) {
throw new ServletException("non-HTTP request or response");
}
request = (HttpServletRequest) req;
response = (HttpServletResponse) res;
service(request, response);
}
}
/*
* A response that includes no body, for use in (dumb) "HEAD" support.
* This just swallows that body, counting the bytes in order to set
* the content length appropriately. All other methods delegate directly
* to the wrapped HTTP Servlet Response object.
*/
// file private
class NoBodyResponse extends HttpServletResponseWrapper {
private static final ResourceBundle lStrings
= ResourceBundle.getBundle("javax.servlet.http.LocalStrings");
private NoBodyOutputStream noBody;
private PrintWriter writer;
private boolean didSetContentLength;
private boolean usingOutputStream;
// file private
NoBodyResponse(HttpServletResponse r) {
super(r);
noBody = new NoBodyOutputStream();
}
// file private
void setContentLength() {
if (!didSetContentLength) {
if (writer != null) {
writer.flush();
}
setContentLength(noBody.getContentLength());
}
}
public void setContentLength(int len) {
super.setContentLength(len);
didSetContentLength = true;
}
public ServletOutputStream getOutputStream() throws IOException {
if (writer != null) {
throw new IllegalStateException(
lStrings.getString("err.ise.getOutputStream"));
}
usingOutputStream = true;
return noBody;
}
public PrintWriter getWriter() throws UnsupportedEncodingException {
if (usingOutputStream) {
throw new IllegalStateException(
lStrings.getString("err.ise.getWriter"));
}
if (writer == null) {
OutputStreamWriter w = new OutputStreamWriter(
noBody, getCharacterEncoding());
writer = new PrintWriter(w);
}
return writer;
}
}
/*
* Servlet output stream that gobbles up all its data.
*/
// file private
class NoBodyOutputStream extends ServletOutputStream {
private static final String LSTRING_FILE =
"javax.servlet.http.LocalStrings";
private static ResourceBundle lStrings =
ResourceBundle.getBundle(LSTRING_FILE);
private int contentLength = 0;
// file private
NoBodyOutputStream() {}
// file private
int getContentLength() {
return contentLength;
}
public void write(int b) {
contentLength++;
}
public void write(byte buf[], int offset, int len)
throws IOException
{
if (len >= 0) {
contentLength += len;
} else {
// This should have thrown an IllegalArgumentException, but
// changing this would break backwards compatibility
throw new IOException(lStrings.getString("err.io.negativelength"));
}
}
}