SuSE11环境下Redis+Keepalived实现高可用技术

企业开发 2018-08-08 18:06:09 阅读次数: 0

1．Redis配置信息
Redis部署使用两台服务器，实现Redis+keepalived，提供redis服务高可用，当主redis进程或服务器宕机之后，备redis进程或服务器继续提供服务。

实现目的：主MASTER宕机后，从BACKUP接管VIP提供服务，升为MASTER，主MASTER恢复后状态变为从BACKUP，不抢占回VIP，待新MASTER宕机后继续接替VIP，重新升为MASTER

                 MASTER-->BACKUP-->MASTER 依次轮询接管服务

服务器配置信息如下所示：

主机名/IP

端口

用途

JZSHPT-APP5/

10.133.214.15

6379

Redis主服务器

JZSHPT-APP6/

扫描二维码关注公众号，回复： 2621408 查看本文章

10.133.214.16

6379

Redis从服务器

2．Redis主服务器搭建
2.1．安装redis
JZSHPT-APP5:/soft # tar -zxf redis-3.2.1.tar.gz -C /usr/local

JZSHPT-APP5:/soft # cd /usr/local/redis-3.2.1/

JZSHPT-APP5:/usr/local/redis-3.2.1 # make

JZSHPT-APP5:/usr/local/redis-3.2.1 # cd src && make install

JZSHPT-APP5:/usr/local # mv /usr/local/redis-3.2.1/ /usr/local/redis

1）redis配置文件修改

JZSHPT-APP5:/usr/local # vim /usr/local/redis/redis.conf

修改文件相关内容为：

protected-mode no

port 6379

daemonize yes

pidfile /usr/local/redis/redis.pid

logfile "/usr/local/redis/redis.log"

2）redis启动脚本编写（非必须）

JZSHPT-APP5:/usr/local/redis # vim /etc/init.d/redisd

#!/bin/sh

#chkconfig 345 86 14

#description Startup and Shutdown script for Redis-3.2.1

progdir=/usr/local/redis/src

progname=redis-server

daemon=$progdir/$progname

config=/usr/local/redis/redis.conf

pidfile=/usr/local/redis/redis.pid

desc="redis daemon"

scriptname=/etc/init.d/redisd

start()

{

if test -x $daemon;

then

echo -e "Starting $desc:$progname"

    if $daemon $config

    then

        echo -e "Start OK!!!"

    else

         echo -e "Start failed!!!"

    fi  

else

echo -e "Couldn't find Redis Server($daemon)"

fi

}

stop()

{

if test -e $pidfile;

then

    echo -e "Stopping $desc:$progname"

    if kill `cat $pidfile`

    then

        echo -e "stop OK!!!"

    else

        echo -e "Stop failed!!!"

    fi

else

    echo -e "No Redis Server($daemoon) running"

fi

}

restart()

{

echo -e "Restarting $desc:$progname"

stop

    start

}

status()

{

ps aux | grep $progname

}

case $1 in

start)

    start

;;

stop)

    stop

;;

restart)

restart

;;

status)

status

;;

*)

echo "Usage:$scriptnme{start|stop|restart|status}" >&2

exit 1

;;

esac

exit 0

JZSHPT-APP5:/usr/local/redis # chmod +x /etc/init.d/redisd

JZSHPT-APP5:/usr/local/redis # chkconfig --add redisd

2.2．安装Keepalived
安装keepalived前请自行安装解决依赖关系（可能会涉及的软件包为libopenssl-devel、zlib-devel、ipvsadm内核模块等）

JZSHPT-APP5:/soft # tar -zxf keepalived-1.2.23.tar.gz

JZSHPT-APP5:/soft # cd keepalived-1.2.23/

JZSHPT-APP5:/soft/keepalived-1.2.23 # ./configure --prefix=/usr/local/keepalived/

JZSHPT-APP5:/soft/keepalived-1.2.23 # make && make install

1） keepalived配置文件编辑

JZSHPT-APP5:~ # mkdir -p /etc/keepalived/{scripts,log}

JZSHPT-APP5:~ # vim /usr/local/keepalived/etc/keepalived/

! Configuration File for keepalived

global_defs {

router_id Redis1_DEVEL

}

vrrp_script chk_redis {

     script "/etc/keepalived/scripts/redis_check.sh"

     interval 2

     timeout 2

     fall 3

}

vrrp_instance VI_1 {

 state BACKUP

 interface eth0

 virtual_router_id 51

 nopreempt

 priority 200

  advert_int 5

  authentication {

auth_type PASS

    auth_pass redis

 }

 virtual_ipaddress {

     10.133.214.50

 }

 track_script {

     chk_redis

}

    notify_master /etc/keepalived/scripts/redis_master.sh

     notify_backup /etc/keepalived/scripts/redis_backup.sh

     notify_fault  /etc/keepalived/scripts/redis_fault.sh

     notify_stop   /etc/keepalived/scripts/redis_stop.sh

}

2）keepalived启动脚本配置

JZSHPT-APP5:~ # cp /soft/keepalived-1.2.23/keepalived/etc/init.d/keepalived.suse.init /etc/init.d/keepalived.suse

JZSHPT-APP5:~ # cp /usr/local/keepalived/sbin/keepalived /usr/local/sbin/

JZSHPT-APP5:~ # cp /usr/local/keepalived/etc/keepalived/ /etc/keepalived/

3）定义监控脚本

JZSHPT-APP5:~ # vim /etc/keepalived/scripts/redis_check.sh

#!/bin/sh

###/etc/keepalived/scripts/redis_check.sh

ALIVE=/usr/local/bin/redis-cli PING

if [ "$ALIVE" == "PONG" ]; then

echo $ALIVE

exit 0

else

echo $ALIVE

exit 1

fi

4）定义状态切换为master时执行的脚本

JZSHPT-APP5:~ # vim /etc/keepalived/scripts/redis_master.sh

#!/bin/sh

###/etc/keepalived/scripts/redis_master.sh

REDISCLI="redis-cli"

LOGFILE="/etc/keepalived/log/redis-state.log"

pid=$$

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver]" >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] Run 'SLAVEOF 10.133.214.16 6379'" >> $LOGFILE

$REDISCLI SLAVEOF 10.133.214.16 6379 >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] wait 10 sec for data sync from old master" >> $LOGFILE

sleep 10

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] data rsync from old mater ok..." >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] Run slaveof no one,close master/slave" >> $LOGFILE

$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] wait other slave connect...." >> $LOGFILE

5）定义状态切换为backups时执行的脚本

JZSHPT-APP5:~ # vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash

###/etc/keepalived/scripts/redis_backup.sh

REDISCLI="redis-cli"

LOGFILE="/etc/keepalived/log/redis-state.log"

pid=$$

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master]" >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] Being slave state..." >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] wait 10 sec for data sync from old master" >> $LOGFILE

sleep 10

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] data rsync from old mater ok..." >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] Run 'SLAVEOF 10.133.214.16 6379'" >> $LOGFILE

$REDISCLI SLAVEOF 10.133.214.16 6379 >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] slave connect to 192.18.3.21 ok..." >> $LOGFILE

6) 定义状态切换为stop时执行的脚本

JZSHPT-APP5:~ # cp /etc/keepalived/scripts/redis_backup.sh /etc/keepalived/scripts/redis_stop.sh

7) 定义状态切换为fault时执行的脚本

JZSHPT-APP5:~ # cp /etc/keepalived/scripts/redis_backup.sh /etc/keepalived/scripts/redis_fault.sh

2.2．安装rsyslog实现keepalived日志分离
1）安装rsyslog软件包

JZSHPT-APP5:/soft # rpm -ivh rsyslog-5.10.1-0.7.49.x86_64.rpm

2）修改rsyslog配置文件

JZSHPT-APP5:/soft # vim /etc/rsyslog.conf

140 #.;mail.none;news.none -/var/log/messages

141 .;mail.none;news.none;local0.none -/var/log/messages

153 #local0,local1.* -/var/log/localmessages

154 local0.* -/var/log/keepalived.log

155 local1.* -/var/log/localmessages

156 local2,local3.* -/var/log/localmessages

157 local4,local5.* -/var/log/localmessages

158 cal6,local7.* -/var/log/localmessages

3）修改rsyslog启动脚本配置文件

根据/etc/init.d/syslog中的三个启动选项，修改该文件内的”SYSLOG_DAEMON”选项

JZSHPT-APP5:/soft # vim /etc/sysconfig/syslog

40 #SYSLOG_DAEMON="syslog-ng"

41 SYSLOG_DAEMON="rsyslogd"

4）修改Keepalived启动脚本选项

JZSHPT-APP5:/soft # vim /etc/init.d/keepalived.suse

17 DAEMON_OPT="-d "

18 DAEMON_OPT="-d -D -S 0"

5）启动rsyslog服务

JZSHPT-APP5:/soft # /etc/init.d/syslog start

2.3．启动Redis和Keepalived
JZSHPT-APP5:~ # /etc/init.d/redisd start

JZSHPT-APP5:~ # /etc/init.d/keepalived.suse start

3．Redis从服务器搭建
3.1．安装redis
JZSHPT-APP6:/soft # tar -zxf redis-3.2.1.tar.gz -C /usr/local

JZSHPT-APP6:/soft # cd /usr/local/redis-3.2.1/

JZSHPT-APP6:/usr/local/redis-3.2.1 # make

JZSHPT-APP6:/usr/local/redis-3.2.1 # cd src && make install

JZSHPT-APP6:/usr/local # mv /usr/local/redis-3.2.1/ /usr/local/redis

1）redis配置文件修改

JZSHPT-APP6:/usr/local # vim /usr/local/redis/redis.conf

修改文件相关内容为：

protected-mode no

port 6379

daemonize yes

pidfile /usr/local/redis/redis.pid

logfile "/usr/local/redis/redis.log"

2）redis启动脚本编写（非必须）

JZSHPT-APP6:/usr/local/redis # vim /etc/init.d/redisd

#!/bin/sh

#chkconfig 345 86 14

#description Startup and Shutdown script for Redis-3.2.1

progdir=/usr/local/redis/src

progname=redis-server

daemon=$progdir/$progname

config=/usr/local/redis/redis.conf

pidfile=/usr/local/redis/redis.pid

desc="redis daemon"

scriptname=/etc/init.d/redisd

start()

{

if test -x $daemon;

then

echo -e "Starting $desc:$progname"

    if $daemon $config

    then

        echo -e "Start OK!!!"

    else

         echo -e "Start failed!!!"

    fi  

else

echo -e "Couldn't find Redis Server($daemon)"

fi

}

stop()

{

if test -e $pidfile;

then

    echo -e "Stopping $desc:$progname"

    if kill `cat $pidfile`

    then

        echo -e "stop OK!!!"

    else

        echo -e "Stop failed!!!"

    fi

else

    echo -e "No Redis Server($daemoon) running"

fi

}

restart()

{

echo -e "Restarting $desc:$progname"

stop

    start

}

status()

{

ps aux | grep $progname

}

case $1 in

start)

    start

;;

stop)

    stop

;;

restart)

restart

;;

status)

status

;;

*)

echo "Usage:$scriptnme{start|stop|restart|status}" >&2

exit 1

;;

esac

exit 0

JZSHPT-APP6:/usr/local/redis # chmod +x /etc/init.d/redisd

JZSHPT-APP6:/usr/local/redis # chkconfig --add redisd

3.2．安装Keepalived
安装keepalived前请自行安装解决依赖关系（可能会涉及的软件包为libopenssl-devel、zlib-devel、ipvsadm内核模块等）

JZSHPT-APP6:/soft # tar -zxf keepalived-1.2.23.tar.gz

JZSHPT-APP6:/soft # cd keepalived-1.2.23/

JZSHPT-APP6:/soft/keepalived-1.2.23 # ./configure --prefix=/usr/local/keepalived/

JZSHPT-APP6:/soft/keepalived-1.2.23 # make && make install

1）keepalived配置文件编辑

JZSHPT-APP6:~ # mkdir -p /etc/keepalived/{scripts,log}

JZSHPT-APP6:~ # vim /usr/local/keepalived/etc/keepalived/

! Configuration File for keepalived

global_defs {

router_id Redis2_DEVEL

}

vrrp_script chk_redis {

     script "/etc/keepalived/scripts/redis_check.sh"

     interval 2

     timeout 2

     fall 3

}

vrrp_instance VI_1 {

 state BACKUP

 interface eth0

 virtual_router_id 51

 priority 150

  advert_int 5

  authentication {

auth_type PASS

    auth_pass redis

 }

 virtual_ipaddress {

     10.133.214.50

 }

 track_script {

     chk_redis

}

    notify_master /etc/keepalived/scripts/redis_master.sh

     notify_backup /etc/keepalived/scripts/redis_backup.sh

     notify_fault  /etc/keepalived/scripts/redis_fault.sh

     notify_stop   /etc/keepalived/scripts/redis_stop.sh

}

2）keepalived启动脚本配置

JZSHPT-APP6:~ # cp /soft/keepalived-1.2.23/keepalived/etc/init.d/keepalived.suse.init /etc/init.d/keepalived.suse

JZSHPT-APP6:~ # cp /usr/local/keepalived/sbin/keepalived /usr/local/sbin/

JZSHPT-APP6:~ # cp /usr/local/keepalived/etc/keepalived/ /etc/keepalived/

3）定义监控脚本

JZSHPT-APP6:~ # vim /etc/keepalived/scripts/redis_check.sh

#!/bin/sh

###/etc/keepalived/scripts/redis_check.sh

ALIVE=/usr/local/bin/redis-cli PING

if [ "$ALIVE" == "PONG" ]; then

echo $ALIVE

exit 0

else

echo $ALIVE

exit 1

fi

4）定义状态切换为master时执行的脚本

JZSHPT-APP6:~ # vim /etc/keepalived/scripts/redis_master.sh

#!/bin/sh

###/etc/keepalived/scripts/redis_master.sh

REDISCLI="redis-cli"

LOGFILE="/etc/keepalived/log/redis-state.log"

pid=$$

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver]" >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] Run 'SLAVEOF 10.133.214.15 6379'" >> $LOGFILE

$REDISCLI SLAVEOF 10.133.214.15 6379 >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] wait 10 sec for data sync from old master" >> $LOGFILE

sleep 10

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] data rsync from old mater ok..." >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] Run slaveof no one,close master/slave" >> $LOGFILE

$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] wait other slave connect...." >> $LOGFILE

5）定义状态切换为backups时执行的脚本

JZSHPT-APP6:~ # vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash

###/etc/keepalived/scripts/redis_backup.sh

REDISCLI="redis-cli"

LOGFILE="/etc/keepalived/log/redis-state.log"

pid=$$

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master]" >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] Being slave state..." >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] wait 10 sec for data sync from old master" >> $LOGFILE

sleep 10

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[master] data rsync from old mater ok..." >> $LOGFILE

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] Run 'SLAVEOF 10.133.214.15 6379'" >> $LOGFILE

$REDISCLI SLAVEOF 10.133.214.15 6379 >> $LOGFILE 2>&1

echo "date +'%Y-%m-%d:%H:%M:%S'|$pid|state:[slaver] slave connect to 10.133.214.15 ok..." >> $LOGFILE

6) 定义状态切换为stop时执行的脚本

JZSHPT-APP6:~ # cp /etc/keepalived/scripts/redis_backup.sh /etc/keepalived/scripts/redis_stop.sh

7) 定义状态切换为fault时执行的脚本

JZSHPT-APP6:~ # cp /etc/keepalived/scripts/redis_backup.sh /etc/keepalived/scripts/redis_fault.sh

3.3．安装rsyslog实现keepalived日志分离
1）安装rsyslog软件包

JZSHPT-APP5:/soft # rpm -ivh rsyslog-5.10.1-0.7.49.x86_64.rpm

2）修改rsyslog配置文件

JZSHPT-APP5:/soft # vim /etc/rsyslog.conf

140 #.;mail.none;news.none -/var/log/messages

141 .;mail.none;news.none;local0.none -/var/log/messages

153 #local0,local1.* -/var/log/localmessages

154 local0.* -/var/log/keepalived.log

155 local1.* -/var/log/localmessages

156 local2,local3.* -/var/log/localmessages

157 local4,local5.* -/var/log/localmessages

159 cal6,local7.* -/var/log/localmessages

3）修改rsyslog启动脚本配置文件

根据/etc/init.d/syslog中的三个启动选项，修改该文件内的”SYSLOG_DAEMON”选项

JZSHPT-APP5:/soft # vim /etc/sysconfig/syslog

40 #SYSLOG_DAEMON="syslog-ng"

41 SYSLOG_DAEMON="rsyslogd"

4）修改Keepalived启动脚本选项

JZSHPT-APP5:/soft # vim /etc/init.d/keepalived.suse

17 DAEMON_OPT="-d "

18 DAEMON_OPT="-d -D -S 0"

5）启动rsyslog服务

JZSHPT-APP5:/soft # /etc/init.d/syslog start

3.4．启动Redis和Keepalived
JZSHPT-APP6:~ # /etc/init.d/redisd start

JZSHPT-APP6:~ # /etc/init.d/keepalived.suse start

测试结果可通过依次停Redis主从单节点来观测vip漂移

猜你喜欢

转载自blog.51cto.com/11612019/2156425
今日推荐
基于大语言模型的开源知识库问答系统 MaxKB GitHub Star 数量突破 5,000 个！
美国拟限制 AI 大模型出口中国和俄罗斯
苹果将与 OpenAI 达成协议，将 ChatGPT 应用于 iPhone
openKylin 社区生态委员会第六次会议圆满召开
阿里云正式发布通义千问 2.5
Python 3.13 发布首个 Beta：实验性自由线程模式和 JIT、改进交互式解释器
Stack Overflow 拿我的代码去训练 AI 大模型，还封了我的账号
Pop!_OS 的 COSMIC 桌面完成 App Store 上架工作
报告：Django 仍然是 74% 开发者的首选
《2024 年一季度互联网投融资运行情况》研究报告
15 年前上了“FFmpeg 耻辱柱”，今天他还得谢谢咱——腾讯QQPlayer一雪前耻？
TIOBE 5 月榜单：Fortran “复活”进入 Top 10
周排行
BPM为企业带来的实际利益
好程序员web前端分享css常用属性缩写
Java文件下载（excel）
css样式的动态添加及显示和隐藏等零碎用法
axios全局配置以及拦截器
使用Logstash来实时同步MySQL和log日志数据到ES
C++获取当前时间（年月日、时分秒、毫秒）
Odoo产品分析 (四) -- 工具板块(11) -- 网站即时聊天(1)
Java环境配置正确，但是java、javac、java -version均返回“不是内部或外部命令，也不是可运行的程序或批处理文件”？
01 官网下载各种CentOS教程（超详细版）
每日归档
更多
2024-05-14(0)
2024-05-13(18)
2024-05-12(0)
2024-05-11(38)
2024-05-10(38)
2024-05-09(35)
2024-05-08(42)
2024-05-07(14)
2024-05-06(40)
2024-05-05(0)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022