接触Golang之后使用过许多的编辑器比如lite,sublime3,goland，lite更适合在windows环境使用，对于非destop版本的Linux就不太适用了，在linux下还是直接上神器vim了，为了快速开发自然要安装许多便捷的插件,先上一张图
首先vim的插件安装有两种形式,一直直接自己安装到~/.vim/plugin目录下 另外一种是使用插件管理器Vundle(还有其他的插件管理器)
开始之前准备一个编辑Go源码的测试源文件，用于验证每个搭建步骤后的变化。
//hello.go
package main
import "fmt"
func main() {
fmt.Println("Hello Golang!")
}
Vim-go是当前使用最为广泛的用于搭建Golang开发环境的vim插件，这里我同样使用vim-go作为核心和基础进行环境搭建的。vim-go利 用开源Vim插件管理器安装，
gmarik/Vundle.vim
是目前被推荐次数更多的Vim插件管理器，超过了
pathogen
。这里我们 就用vundle来作为Vim的插件管理工具。
1、安装Vundle.vim
Vundle.vim的安装步骤如下：
mkdir ~/.vim/bundle
创建
~/.vimrc
文件(如果你没有这个文件的话，
附录为完整的.vimrc文件
)，在文件顶部添加有关Vundle.vim的配置：
filetype off
filetype plugin indent off
set rtp+=$VIM/vimfiles/bundle/vundle/
"rc后的参数表示Vundle自动下载安装插件的位置,为空放在~/.vim/下
call vundle#rc('$VIM/vimfiles/bundle/')
Bundle 'gmarik/vundle'
filetype plugin indent on
syntax on
2、安装Vim-go
编辑
~/.vimrc
，在
vundle#begin
和
vundle#end
间增加一行：
Plugin 'fatih/vim-go', { 'do': ':GoUpdateBinaries' }
在Vim内执行
:PluginInstall
，
Vundle.vim会在左侧打开一个Vundle Installer Preview子窗口，窗口下方会提示：
“Processing 'fatih/vim-go'”
，待安装完毕后，提示信息变 成“
Done!”。
这时，我们可以看到.vim/bundle下多了一个vim-go文件夹：
$ ls .vim/bundle/
vim-go/ Vundle.vim/
此时，再次编辑hellogo.go，
语法高亮
有了，
保存时自动format
（利用$GOBIN/gofmt）也有了，但其他高级功能，比如自动import缺失的 package、自动补齐仍然没有，我们还要继续安装一些东东。
3、安装go.tools Binaries
vim-go安装说明中提到所有必要的binary需要先安装好，
goimports 会自动删除导入import的包
godef 可以跳转到函数定义处
gocode 这个就是go代码自动完成的插件装了YouCompleteMe之后就不需要再点击ctrl x才出现 而是敲代码时自动出现
gotags 这个可以方便你查看源码
通过
:GoInstallBinaries
，这些vim-go依赖的二进制工具将会自动被下载，并被安装到
$GOBIN
下或
$GOPATH/bin
下。（这个工具需要依赖git或hg，需要提前安装到你的OS中。）
:GoInstallBinaries
的执行是交互式的，你需要回车确认：
Error installing
github.com/zmb3/gogetdoc
:
github.com/zmb3/gogetdoc
(download)^@Fetching
https://golang.org/x/tools/go/buildutil?go-get=1
^@https fetch failed: Get
https://golang.org/x/tools/go/buildutil?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/
tools/go/buildutil: unrecognized import path "
golang.org/x/tools/go/buildutil
" (https fetch: Get
https://golang.org/x/tools/go/buildutil?
go-get=1: dial tcp 216.239.37.1:443: i/o timeout)^@Fetching
https://golang.org/x/tools/go/loader?go-get=1
^@https fetch failed: Get https:
//
golang.org/x/tools/go/loader?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/tools/go/loader
: unrecognized impor
t path "
golang.org/x/tools/go/loader
" (https fetch: Get
https://golang.org/x/tools/go/loader?go-get=1
: dial tcp 216.239.37.1:443: i/o tim
eout)^@
Error installing
golang.org/x/tools/cmd/guru
: Fetching
https://golang.org/x/tools/cmd/guru?go-get=1
^@https fetch failed: Get
https://gola
ng.org/x/tools/cmd/guru?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/tools/cmd/guru
: unrecognized import path "
golang.org/x/tools/cmd/guru
" (https fetch: Get
https://golang.org/x/tools/cmd/guru?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout)^@
vim-go: golint not found. Installing
github.com/golang/lint/golint
to folder /root/Applications/Go/bin
Error installing
github.com/golang/lint/golint
:
github.com/golang/lint
(download)^@Fetching
https://golang.org/x/lint?go-get=1
^@https fet
ch failed: Get
https://golang.org/x/lint?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/lint
: unrecognized import
path "
golang.org/x/lint
" (https fetch: Get
https://golang.org/x/lint?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout)^@
vim-go: errcheck not found. Installing
github.com/kisielk/errcheck
to folder /root/Applications/Go/bin
Error installing
github.com/kisielk/errcheck
:
github.com/kisielk/errcheck
(download)^@Fetching
https://golang.org/x/tools/go/loader?go-ge
t=1^@https fetch failed: Get
https://golang.org/x/tools/go/loader?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/
tools/go/loader: unrecognized import path "
golang.org/x/tools/go/loader
" (https fetch: Get
https://golang.org/x/tools/go/loader?go-get=1
:
Error installing
github.com/josharian/impl
:
github.com/josharian/impl
(download)^@Fetching
https://golang.org/x/tools/imports?go-get=1
^@h
ttps fetch failed: Get
https://golang.org/x/tools/imports?go-get=1
: dial tcp 216.239.37.1:443: i/o timeout^@package
golang.org/x/tools/im
ports: unrecognized import path "
golang.org/x/tools/imports
" (https fetch: Get
https://golang.org/x/tools/imports?go-get=1
: dial tcp 216.
239.37.1:443: i/o timeout)^@
vim-go: goimports not found. Installing
golang.org/x/tools/cmd/goimports
to folder /root/Applications/Go/bin
由于众所周知的原因，vim-go的自动安装很可能以失败告终
你可以通过命令安装
#goimports
go get -u golang.org/x/tools/cmd/goimports
也可以根据上 面日志中提到的各个工具的源码地址逐一去下载并本地安装。
先在你的 $GOPATH 目录(如果不懂 GOPATH，请先弄懂)下，创建目录 src：
$ mkdir src
.
└──
src
└──
github
.
com
└──
nsf
└──
gocode
├──
LICENSE
├──
README
.
md
├──
_gccgo
│
└──
package
.
go
├──
_goremote
...
接下来安装这个包：
$ go install github.com/nsf/gocode/
这时候目录下会生成一个
pkg
目录，里面有编译好的 .a 文件，就可以在 go 文件里使用这个包了。
安装后，$GOBIN下的新增Binaries如下：
[root@iz6r97y3yfzu8dz src]# ls $GOBIN -l
total 147132
-rwxr-xr-x 1 root root 2787103 Jun 17 11:52 asmfmt
-rwxr-xr-x 1 root root 15017165 Jun 15 22:48 dlv
-rwxr-xr-x 1 root root 5474480 Jun 16 23:53 errcheck
-rwxr-xr-x 1 root root 5843192 Jun 15 22:03 fillstruct
-rwxr-xr-x 1 root root 11167455 Jun 16 23:52 gocode
-rwxr-xr-x 1 root root 5830125 Jun 17 11:11 godef
-rwxr-xr-x 1 root root 15742059 Jun 16 23:51 godoc
-rwxr-xr-x 1 root root 6122650 Jun 16 23:52 gogetdoc
-rwxr-xr-x 1 root root 5208106 Jun 16 23:51 goimports
-rwxr-xr-x 1 root root 5660873 Jun 17 00:00 golint
-rwxr-xr-x 1 root root 6481988 Jun 16 23:53 gometalinter
-rwxr-xr-x 1 root root 4209794 Jun 16 23:27 gomodifytags
-rwxr-xr-x 1 root root 5843793 Jun 16 23:51 gorename
-rwxr-xr-x 1 root root 3042035 Jun 17 11:13 gotags
-rwxr-xr-x 1 root root 12120307 Jun 13 08:08 gotour
-rwxr-xr-x 1 root root 8915016 Jun 16 23:51 guru
-rwxr-xr-x 1 root root 8821388 Jun 16 23:52 heapview
-rwxr-xr-x 1 root root 2015916 Jun 10 23:50 hello
-rwxr-xr-x 1 root root 2715393 Jun 16 23:56 iferr
-rwxr-xr-x 1 root root 5173602 Jun 17 00:09 impl
-rwxr-xr-x 1 root root 3448802 Jun 16 23:27 motion
-rwxr-xr-x 1 root root 2719723 Jun 16 23:52 stress
-rwxr-xr-x 1 root root 6258644 Jun 16 23:52 stringer
安装好这些Binaries后，我们来看看哪些特性被支持了。
再次编辑
hello.go
：
- 新起一行输入fmt.，然后ctrl+x, ctrl+o，Vim 会弹出补齐提示下拉框，不过并非实时跟随的那种补齐，这个补齐是由gocode提供的。
– 输入一行代码：time.Sleep(time.Second)，执行:GoImports，Vim会自动导入time包。
– 将光标移到Sleep函数上，执行:GoDef或命令模式下敲入gd，Vim会打开$GOROOT/src/time/sleep.go中 的Sleep函数的定义。执行:b 1返回到hello.go。
– 执行:GoLint，运行golint在当前Go源文件上。
– 执行:GoDoc，打开当前光标对应符号的Go文档。
– 执行:GoVet，在当前目录下运行go vet在当前Go源文件上。
– 执行:GoRun，编译运行当前main package。
– 执行:GoBuild，编译当前包，这取决于你的源文件，GoBuild不产生结果文件。
– 执行:GoInstall，安装当前包。
– 执行:GoTest，测试你当前路径下地_test.go文件。
– 执行:GoCoverage，创建一个测试覆盖结果文件，并打开浏览器展示当前包的情况。
– 执行:GoErrCheck，检查当前包种可能的未捕获的errors。
– 执行:GoFiles，显示当前包对应的源文件列表。
– 执行:GoDeps，显示当前包的依赖包列表。
– 执行:GoImplements，显示当前类型实现的interface列表。
– 执行:GoRename [to]，将当前光标下的符号替换为[to]。
4、其他插件
到目前为止，我们还有若干特性没能实现，重点是：
– 实时跟随的代码补齐
– Code Snippet support
(1)、安装YCM(Your Complete Me)
在~/.vimrc中添加一行：
Plugin 'Valloric/YouCompleteMe'
保存退出后，再打开~/.vimrc并执行
:PluginInstall
。
安装完后重新进入vim，下面的提示栏提示：
[root@iz6r97y3yfzu8dz test]# vim ~/.vimrc
UltiSnips requires py >= 2.7 or py3
YouCompleteMe unavailable: requires Vim compiled with Python (2.7.1+ or 3.4+) support.
请按 ENTER 或其它命令继续
[root@iz6r97y3yfzu8dz test]#vim --version |grep python
HanDevServer:/opt/itest # /opt/iapps/vim/bin/vim --version |grep python
+cryptv +linebreak -python +viminfo
-cscope +lispindent -python3 +vreplace
如果发现是这样的，说明没有加入Python支持，需要重新编译安装vim，加入--enable-pythoninterp=yes参数。如果想开启Python3支持，则--enable-python3interp=yes，所以最终的编译选项是：
HanDevServer:~handaoliang/src/vim74 # ./configure --prefix=/opt/iapps/vim --enable-multibyte --enable-pythoninterp=yes
#如果vim版本不符合就需要卸载旧版本，然后下载最新版本vim
#
make一遍的时候，第二遍make时会出现cached，所以第二次make的时候还会使用第一次的执行结果，所以想修改就必须清除make操作之后，两次make
cd vim
make uninstall
//卸载
make clean
rm -rf src/auto/config.cache
.
/configure --with-features=
huge \
--enable-
multibyte \
--enable-rubyinterp=
yes \
--enable-pythoninterp=
yes \
--with-python-config-
dir
=/usr/lib64/python2.
7
/
config \
--enable-perlinterp=
yes \
--enable-luainterp=
yes \
--enable-
cscope \
--prefix=/usr/
local
make && make install
似乎YCM是用了C++编写的模块对性能进行优化了，于是需要手工编译YCM的support库。步骤如下：
sudo apt-get install build-essential cmake python-dev
cd ~/.vim/bundle/YouCompleteMe
./install.sh
构建（编译C++很慢，需要耐心的等一会）ok后，再打开hello.go，逐字的实时补全功能就具备了！Cool！
手动安装方法
因为安装过程中ycm一直安装不成功所以采用手动安装
手动下载完后检查仓库的完整性，切换到
YouCompleteMe
目录下，输入如下命令：
# yum install build-essential cmake python-dev
$
cd ~/.vim/bundle/
$
cd
YouCompleteMe
/
$
git submodule update --init --recursive
$
cd ~/.vim/bundle/
YouCompleteMe
$
./install.py --gocode-completer --clang-completer
(2)、安装 UltiSnips
Vim-go默认是用ultisnips引擎插件，但这个插件需要单独安装。
同样，我们利用vundle来安装它，在~/.vimrc中添加一行：
Plugin 'SirVer/ultisnips'
snippet和snippet引擎是分开的。ultisnips是引擎，vim-go的go snippet定义在这里
编辑hello.go，按照go.snip中的说明，我们输入func后敲击tab键，我们发现期待的：
func name(params) type {
}
并没有出现。反倒是YCM的下拉提示显示在那里让你选择。似乎是ultisnips和YCM的键组合冲突了。ultisnips官方说明也的确如 此。ultisnips默认是用Tab展开snippet的，而YCM中的Tab用来选择补齐项，我们可以通过设置来避免这些。
我们在.vimrc中添加如下setting：
" YCM settings
let g:ycm_key_list_select_completion = ['', '']
let g:ycm_key_list_previous_completion = ['']
let g:ycm_key_invoke_completion = '<C-Space>'
" UltiSnips setting
let g:UltiSnipsExpandTrigger="<tab>"
let g:UltiSnipsJumpForwardTrigger="<c-b>"
let g:UltiSnipsJumpBackwardTrigger="<c-z>"
这样让YCM通过回车和向下的箭头来做list item正向选择，通过向上箭头做反向选择。通过ctrl+space来原地触发补齐提示。
而ultisnips则是用tab做snippet展开，ctrl+b正向切换占位符，ctrl+z反向切换占位符。
(3)、安装Solarized theme
1. Download and install Tim Pope's Pathogen.
2. Next, move or clone the vim-colors-solarized directory so that it is a subdirectory of the .vim/bundle directory.
a. Clone:
$ cd ~/.vim/bundle
$ git clone git://github.com/altercation/vim-colors-solarized.git
b. Move:
In the parent directory of vim-colors-solarized:
$ mv vim-colors-solarized ~/.vim/bundle/
After either Option 1 or Option 2 above, put the following two lines in your .vimrc:
syntax enable
set background=dark
colorscheme solarized
or, for the light background mode of Solarized:
syntax enable
set background=light
colorscheme solarized
I like to have a different background in GUI and terminal modes, so I can use the following if-then. However, I find vim's background autodetection to be pretty good and, at least with MacVim, I can leave this background value assignment out entirely and get the same results.
if
has('gui_running')
set background=light
else
set background=dark
endif
(4)、molokai theme
Molokai theme是TextMate的theme的vim port, 颜色不错，配置比较简单：
mkdir ~
/.vim/colors
在.vimrc添加：
colorscheme molokai
set
t_Co=
256
set
background=dark
（5）、安装NERDTree插件
在.vimrc下面加上：
Plugin ‘scrooloose/nerdtree’
其他步骤与前面安装插件类似，略过。
下面主要看下.vimrc下面的配置：
"===============================
"
NERDTree settings
" ==============================
"
F2 to open NERDTree
map
<F7>
:NERDTreeToggle<CR>
" modify the icon of the tree
"
let g:NERDTreeDirArrowExpandable =
'+'
"let g:NERDTreeDirArrowCollapsible = '-'
"
show postion of the window
let g:NERDTreeWinPos =
'left'
" the size of window
let g:NERDTreeSize = 30
"
show line num in window
"let g:NERDTreeShowLineNumber = 1
"
if
show hidden file
"let g:NERDTreeHidden = 0
"
open vim,
if
no file, open NERDTree automatically
" autocmd vimenter * if !argc()|NERDTree|endif
"
automatically close when the NERDTree is the only one window
" autocmd bufenter * if (winnr("
$
")==1 && exists("
b:NERDTree
") &&
"
b:NERDTree.isTabTree())|q|endif
" open NERDTree automatically when open vim
"
autocmd vimenter * NERDTree</cr></f2>
NERDTree插件启动测试：
（6）.安装Tagbar插件
1）安装gotags：
gotags是go语言编写的，直接使用go get命令安装：
|
go get -u github.com
/jstemmer/gotags
|
2）安装ctags：
|
yum -y
install
ctags
|
3）安装vim Tagbar插件：
在.vimrc下面加上：
Plugin 'majutsushi/Tagbar' "函数按类区分，按类折叠显示
其他步骤与前面安装插件类似，略过。
tagbar支持多种语言，可以参考:
下面主要看下支持golang的配置，.vimrc下面的配置：
"===============================
"
Tagbar settings
" ==============================
"
Set width
of
the Tagbar
window
let
g
:tagbar_width =
30
" map shutcut key for Tagbar, press F8 to open automatically
nmap <F9> :TagbarToggle<CR>
"
tagbar usr ctags plugin
let g:tagbar_ctags_bin = 'ctags'
noremap <Leader>y :TagbarToggle<CR> "
Display panel
with
(,y)
"
show
on
left,
default
is
right
" let g:tagbar_left = 1
"开启自动预览(随着光标在标签上的移动，顶部会出现一个实时的预览窗口)
let g:tagbar_autopreview = 1
"
set tagbar
window
width,
default
size
is
40
"
let g:tagbar_width = 30
"
consur stays
on
tagbar
window
,
default
is
on
vim
window
let
g
:tagbar_autofocus =
1
" set label not sorted, default is sorted
let g:tagbar_sort = 0
"
support golang
let g:tagbar_type_go = {
\
'ctagstype'
:
'go'
,
\
'kinds'
: [
\
'p:package'
,
\
'f:function'
,
\
'v:variables'
,
\
't:type'
,
\
'c:const'
\]
\}
注意:g:tagbar_type_go 这里的设置在官方网站上提供了两种方法，由于我安装了ctags，所以采用上面这种设置。
let g:tagbar_type_go = {
\ 'ctagstype' : 'go',
\ 'kinds' : [
\ 'p:package',
\ 'i:imports:1',
\ 'c:constants',
\ 'v:variables',
\ 't:types',
\ 'n:interfaces',
\ 'w:fields',
\ 'e:embedded',
\ 'm:methods',
\ 'r:constructor',
\ 'f:functions'
\ ],
\ 'sro' : '.',
\ 'kind2scope' : {
\ 't' : 'ctype',
\ 'n' : 'ntype'
\ },
\ 'scope2kind' : {
\ 'ctype' : 't',
\ 'ntype' : 'n'
\ },
\ 'ctagsbin' : 'gotags',
\ 'ctagsargs' : '-sort -silent'
\ }
官方图片链接： 使用：光标在某变量或函数上，输入gd跳转 ctrl+o返回
Tagbar插件启动测试：
安装好Tagbar插件后，用vim打开go文件，输入“
:Tagbar
”或者按"
F8
"就可以打开Tagbar。可以使用"
CTRL+W+方向键
"实现窗口切换，可以使用“
Ctrl + ]
”跳至函数定义处，然后再使用“
Ctrl + t
”返回。下面是Tagbar的常用的快捷键和命令：
|
命令
|
描述
|
|
F1
|
关闭/显示帮助信息；
|
|
q
|
关闭Tagbar窗口；
|
|
x
|
放大/缩小Tagbar窗口；
|
|
s
|
项目排序切换；
|
|
+, <kPlus>, zo
|
展开折叠；
|
|
-, <kMinus>, zc
|
收起折叠；
|
|
o, za
|
折叠收起\展开切换；
|
|
*, <kMultiply>, zR
|
展开所有折叠；
|
|
=, zM
|
收起所有折叠；
|
|
回车
|
转到标签定义处，并且光标跳转到标签定义处；
|
|
p
|
转到标签定义处，但光标停留在Tagbar的窗口；
|
|
P
|
在预览窗口显示标签；
|
|
<C-N>
|
跳到下一个上级标签；
|
|
<C-P>
|
跳到上一个上级标签；
|
|
<Space>
|
显示标签定义；
|
（7）.安装SrcExpl插件
在.vimrc下面加上：
Plugin ‘wesleyche/SrcExpl’
其他步骤与前面安装插件类似，略过。
"===============================
"
SrcExpl settings
" ==============================
"
//
The
switch
of
the Source Explorer
nmap <F9> :SrcExplToggle<CR>
" // Set the height of Source Explorer window
let g:SrcExpl_winHeight = 8
"
//
Set
100
ms
for
refreshing the Source Explorer
let
g
:SrcExpl_refreshTime =
100
" // Set "
Enter
" key to jump into the exact definition context
let g:SrcExpl_jumpKey = "
<ENTER>
"
"
//
Set
"Space"
key
for
back from the definition context
let
g
:SrcExpl_gobackKey =
"<SPACE>"
" // In order to avoid conflicts, the Source Explorer should know what plugins
"
//
except itself are using buffers. And you need add their buffer names into
" // below listaccording to the command "
:buffers!
"
let g:SrcExpl_pluginList = [
\ "
__Tag_List__
",
\ "
_NERD_tree_
"
\ ]
"
//
Enable/Disable the local definition searching,
and
note that
this
is
not
" // guaranteed to work, the Source Explorer doesn't check the syntax for now.
"
//
It only searches
for
a match
with
the keyword according to command
'gd'
let
g
:SrcExpl_searchLocalDef =
1
" // Do not let the Source Explorer update the tags file when opening
let g:SrcExpl_isUpdateTags = 0
"
//
Use
'Exuberant Ctags'
with
'--sort=foldcase -R .'
or
'-L cscope.files'
to
" // create/update the tags file
let g:SrcExpl_updateTagsCmd = "
ctags --sort=foldcase -R .
"
"
//
Set
"<F12>"
key
for
updating the tags file artificially
let
g
:SrcExpl_updateTagsKey =
"<F12>"
" // Set "
<F3>
" key for displaying the previous definition in the jump list
let g:SrcExpl_prevDefKey = "
<F3>
"
"
//
Set
"<F4>"
key
for
displaying the next definition
in
the jump list
let
g
:SrcExpl_nextDefKey =
"<F4>"
Nerdtree, tagbar, SrcExpl三窗口之间切换可以按ctrl+w+w
附录：.vimrc文件
set nocompatible " be iMproved, required
filetype off " required
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" alternatively, pass a path where Vundle should install plugins
Plugin 'VundleVim/Vundle.vim' "let Vundle manage Vundle, required
Plugin 'flazz/vim-colorschemes' "配色插件
Plugin 'scrooloose/nerdtree' "树形目录
Plugin 'jistr/vim-nerdtree-tabs' "多标签共用nerdtree
Plugin 'majutsushi/Tagbar' "函数按类区分，按类折叠显示
Plugin 'wesleyche/SrcExpl' "自动显示跳转函数及变量定义功能
Plugin 'ctrlpvim/ctrlp.vim' "查找文件
Plugin 'vim-scripts/indentpython.vim' "自动缩进
Plugin 'vim-syntastic/syntastic' "静态语法检测
Plugin 'nvie/vim-flake8' "添加PEP8代码风格检查
Plugin 'fatih/vim-go',{'do':'GoUPdateBinaries'}
Plugin 'SirVer/ultisnips' " func 自动补齐
Plugin 'Valloric/YouCompleteMe' "代码自动补齐
" All of your Plugins must be added before the following line
call vundle#end() " required
filetype plugin indent on " required
" To ignore plugin indent changes, instead use:
"filetype plugin on
"
" Brief help
" :PluginList - lists configured plugins
" :PluginInstall - installs plugins; append `!` to update or just :PluginUpdate
" :PluginSearch foo - searches for foo; append `!` to refresh local cache
" :PluginClean - confirms removal of unused plugins; append `!` to auto-approve removal
"
" see :h vundle for more details or wiki for FAQ
" Put your non-Plugin stuff after this line
" System vimrc file for MacVim
"
"================================
" YCM settings
" ===============================
let g:ycm_key_list_select_completion = ['','']
let g:ycm_key_list_previous_completion = ['']
let g:ycm_key_invoke_completion = '<C-Space>'
"================================
" UltiSnips settings
"================================
let g:UltiSnipsExpandTrigger = "<tab>"
let g:ULtiSnipsJumpForwardTrigger = "<c-b>"
let g:UltiSnipsJumpBackwardTrigger = "<c-z>"
"===============================
" Theme settings
"===============================
syntax enable "语法高亮
"set background=light "设置背景色
set background=dark "设置背景色
"colorscheme solarized "主题
set t_Co=256
colorscheme molokai "主题
set nocompatible "关闭对 vi 的兼容
set nu "设置行号
" The default for 'backspace' is very confusing to new users, so change it to a
" more sensible value. Add "set backspace&" to your ~/.vimrc to reset it.
set backspace+=indent,eol,start
" Disable localized menus for now since only some items are translated (e.g.
" the entire MacVim menu is set up in a nib file which currently only is
" translated to English).
"======================================
"静态语法检测
"======================================
let g:syntastic_lua_checkers = ['luacheck']
let python_highlight_all=1
let g:syntastic_always_populate_loc_list = 1
let g:syntastic_auto_loc_list = 1
let g:syntastic_check_on_open = 1
let g:syntastic_check_on_wq = 0
"======================================
"NERDTree settings
"======================================
map <F2> :NERDTreeToggle<CR> "设置f2为打开、关闭NERDTree快捷键
let g:NERDTreeWinPos="left" "靠左显示
let g:NERDTreeWinSize=25 "最大长度
let g:NERDTreeShowLineNumbers=1 "显示行号
let NERDTreeShowHidden=1 "是否显示隐藏文件
let g:nerdtree_tabs_open_on_console_startup=1 " 在终端启动vim时，共享NERDTree，用于打开多个标签页的情况
let NERDTreeIgnore=['\.pyc','\~$','\.swp'] " 忽略一下文件的显示
" let NERDTreeShowBookmarks=1 " 显示书签列表
let NERDTreeHighlightCursorline = 1 "高亮当前行
let g:NERDTreeAutoCenter=1
let g:neocomplcache_enable_at_startup = 1
"从NERDTree打开文件后自动关闭NERDTree
let g:NERDTreeQuitOnOpen=1
" 在终端启动vim时，共享NERDTree
" 显示书签列表
"autocmd vimenter * NERDTree "打开vim默认打开nerdtree
"autocmd VimEnter * wincmd p "打开vim默认光标位置在文件中
" Highlight current line
au WinLeave * set nocursorline nocursorcolumn
au WinEnter * set cursorline cursorcolumn
set cursorline cursorcolumn
" Display tabs at the beginning of a line in Python mode as bad.
au BufRead,BufNewFile *.py,*.pyw match CursorLineNr /^\t\+/
" Make trailing whitespace be flagged as bad.
au BufRead,BufNewFile *.py,*.pyw,*.c,*.h match CursorLineNr /\s\+$/
"===============================
"syntax light on
"===============================
let g:go_highlight_functions = 1
let g:go_highlight_methods = 1
let g:go_highlight_structs = 1
let g:go_highlight_operators = 1
let g:go_highlight_build_constraints = 1
"===============================
" Tagbar settings
" ==============================
" Set width of the Tagbar windowlet g:tagbar_width = 30" map shutcut key for Tagbar, press F8 to open automatically
nmap <F9> :TagbarToggle<CR>
let g:tagbar_ctags_bin = 'ctags'
noremap <Leader>y :TagbarToggle<CR> " Display panel with (,y)
"show on left, default is right
"let g:tagbar_left = 1
"开启自动预览(随着光标在标签上的移动，顶部会出现一个实时的预览窗口)
let g:tagbar_autopreview = 1
" set tagbar window width, default size is 40"
let g:tagbar_width = 30
"consur stays on tagbar window, default is on vim window
let g:tagbar_autofocus = 1
"set label not sorted, default is sorted
let g:tagbar_sort = 0
" support golang
let g:tagbar_type_go = {
\ 'ctagstype' : 'go',
\ 'kinds' : [
\ 'p:package',
\ 'i:imports:1',
\ 'c:constants',
\ 'v:variables',
\ 't:types',
\ 'n:interfaces',
\ 'w:fields',
\ 'e:embedded',
\ 'm:methods',
\ 'r:constructor',
\ 'f:functions'
\ ],
\ 'sro' : '.',
\ 'kind2scope' : {
\ 't' : 'ctype',
\ 'n' : 'ntype'
\ },
\ 'scope2kind' : {
\ 'ctype' : 't',
\ 'ntype' : 'n'
\ },
\ 'ctagsbin' : 'gotags',
\ 'ctagsargs' : '-sort -silent'
\ }
"===============================
" SrcExpl settings
" ==============================
"// The switch of the Source Explorer
nmap <F10> :SrcExplToggle<CR>
" // Set the height of Source Explorer window
" let g:SrcExpl_winHeight = 8
"
" " // Set 100 ms for refreshing the Source Explorer
let g:SrcExpl_refreshTime = 100
" // Set "Enter" key to jump into the exact definition context
let g:SrcExpl_jumpKey = "<ENTER>"
"
" // Set "Space" key for back from the definition context
let g:SrcExpl_gobackKey = "<SPACE>"
" // In order to avoid conflicts, the Source Explorer should know what plugins
" // except itself are using buffers. And you need add their buffer names into
" // below listaccording to the command ":buffers!"
let g:SrcExpl_pluginList = [
\ "__Tag_List__",
\ "_NERD_tree_"
\ ]
" // Enable/Disable the local definition searching, and note that this is not
" // guaranteed to work, the Source Explorer doesn't check the syntax for now.
" // It only searches for a match with the keyword according to command 'gd'
let g:SrcExpl_searchLocalDef = 1
" // Do not let the Source Explorer update the tags file when opening
let g:SrcExpl_isUpdateTags = 0
" // Use 'Exuberant Ctags' with '--sort=foldcase -R .' or '-L cscope.files' to
" // create/update the tags file
let g:SrcExpl_updateTagsCmd = "ctags --sort=foldcase -R ."
" // Set "<F12>" key for updating the tags file artificially
let g:SrcExpl_updateTagsKey = "<F12>"
" // Set "<F3>" key for displaying the previous definition in the jump list
let g:SrcExpl_prevDefKey = "<F3>"
" // Set "<F4>" key for displaying the next definition in the jump list
let g:SrcExpl_nextDefKey = "<F4>"
"=====================================
"设置缩进
"====================================
set tabstop=4
set softtabstop=4
set shiftwidth=4
set textwidth=120
set showmatch
set expandtab
set autoindent
set fileformat=unix
set nohls
set guifont=Consolas:h14
set encoding=utf-8
set langmenu=zh_CN.UTF-8
"=====================================
"解决菜单乱码
"=====================================
source $VIMRUNTIME/delmenu.vim
source $VIMRUNTIME/menu.vim
"解决consle输出乱码
language messages zh_CN.UTF-8
"默认最大化窗口打开
au GUIEnter * simalt ~x