一、配置R1和R2的IP地址
R1:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 10.0.12.1 24
Jul 19 2018 10:33:33-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]quit
R2：
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 10.0.12.2 24
[R2-GigabitEthernet0/0/0]
Jul 19 2018 10:40:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]return
<R2>
二、配置R1为ftp 服务器，R2为客户端
[R1]ftp server enable //启用ftp服务功能
Info: Succeeded in starting the FTP server
[R1]set default ftp-directory flash: //配置ftp的工作目录
[R1]aaa //启用aaa认证
[R1-aaa]local-user ftp password cipher huawei //设置ftp用户名和密码
Info: Add a new user.
[R1-aaa]local-user ftp privilege level 15 //设置用户权限为15
[R1-aaa]local-user ftp ftp-directory flash:
[R1-aaa]dis ftp-server //查看ftp服务器配置
FTP server is running
Max user number 5
User count 0
Timeout value(in minute) 30
Listening port 21
Acl number 0
FTP server's source address 0.0.0.0
三、客户端R2登录ftp服务器端R1
<R2>ftp 10.0.12.1
Trying 10.0.12.1 ...
Press CTRL+K to abort
Connected to 10.0.12.1.
220 FTP service ready.
User(10.0.12.1:(none)):ftp //输入用户名
331 Password required for ftp.
Enter password: //输入密码
230 User logged in.
[R2-ftp] //此时已经登录ftp服务器了
四、ftp的上传文件和下载
[R2-ftp]dir //查看目录
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Jul 19 02:30 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Jul 19 02:30 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 ssl***.zip
-rwxrwxrwx 1 noone nogroup 205 Jul 19 03:05 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Jul 19 03:05 .
-rwxrwxrwx 1 noone nogroup 635 Jul 19 03:05 vrpcfg.zip
226 Transfer complete.
FTP: 467 byte(s) received in 0.150 second(s) 3.11Kbyte(s)/sec.
（1）从ftp服务器下载文件
[R2-ftp]get vrpcfg.zip 11vrpcfg.zip //下载vrpcfg.zip文件到本地并命名为11vrpcfg.zip
200 Port command okay.
150 Opening ASCII mode data connection for vrpcfg.zip.
226 Transfer complete.
FTP: 635 byte(s) received in 0.710 second(s) 894.36byte(s)/sec.
（2）退出查看
[R2-ftp]bye
221 Server closing.
<R2>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Jul 19 2018 02:30:30 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 635 Jul 19 2018 06:50:02 11vrpcfg.zip //此处已有该文件，说明已经成功下载
3 -rw- 2,263 Jul 19 2018 02:30:22 statemach.efs
4 -rw- 828,482 May 26 2014 09:20:58 ssl***.zip
5 -rw- 205 Jul 19 2018 06:48:31 private-data.txt
6 -rw- 556 Jul 19 2018 06:48:30 vrpcfg.zip
1,090,732 KB total (784,452 KB free)
<R2>
（3）将11vrpcfg.zip文件上传至ftp服务器
<R2>ftp 10.0.12.1 连接到ftp服务器
Trying 10.0.12.1 ...
Press CTRL+K to abort
Connected to 10.0.12.1.
220 FTP service ready.
User(10.0.12.1:(none)):ftp
331 Password required for ftp.
Enter password:
230 User logged in.
[R2-ftp]put 11vrpcfg.zip //上传11vrpcfg.zip文件
200 Port command okay.
150 Opening ASCII mode data connection for 11vrpcfg.zip.
100%
226 Transfer complete.
FTP: 635 byte(s) sent in 0.250 second(s) 2.54Kbyte(s)/sec.
[R2-ftp]dir //查看
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Jul 19 02:30 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 635 Jul 19 07:01 11vrpcfg.zip //此处已有，说明上传成功
-rwxrwxrwx 1 noone nogroup 2263 Jul 19 02:30 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 ssl***.zip
-rwxrwxrwx 1 noone nogroup 205 Jul 19 03:05 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Jul 19 07:01 .
-rwxrwxrwx 1 noone nogroup 635 Jul 19 03:05 vrpcfg.zip
226 Transfer complete.
FTP: 536 byte(s) received in 0.140 second(s) 3.82Kbyte(s)/sec.