IOS使用批处理打包

#注意：脚本目录和xxxx.xcodeproj要在同一个目录，如果放到其他目录，请自行修改脚本。
#工程名字(Target名字)
Project_Name="Target名字，系统默认和工程名字一样"
#配置环境，Release或者Debug
Configuration="Release"

#AdHoc版本的Bundle ID
AdHocBundleID="com.xxxxx"
#AppStore版本的Bundle ID
AppStoreBundleID="com.xxxxx"
#enterprise的Bundle ID
EnterpriseBundleID="com.xxxxx"

# ADHOC
#证书名#描述文件
ADHOCCODE_SIGN_IDENTITY="iPhone Distribution: xxxxx"
ADHOCPROVISIONING_PROFILE_NAME="xxxxx-xxxx-xxxxx-xxxxx"

#AppStore证书名#描述文件
APPSTORECODE_SIGN_IDENTITY="iPhone Distribution: xxxx"
APPSTOREROVISIONING_PROFILE_NAME="xxxx-xxxx-xxxx-xxxx-xxxx"

#企业(enterprise)证书名#描述文件
ENTERPRISECODE_SIGN_IDENTITY="iPhone Distribution: xxxx"
ENTERPRISEROVISIONING_PROFILE_NAME="693bc1e0-7f7a-4fba-8a08-977ffb7fb296"

#加载各个版本的plist文件
ADHOCExportOptionsPlist=./ADHOCExportOptionsPlist.plist
AppStoreExportOptionsPlist=./AppStoreExportOptionsPlist.plist
EnterpriseExportOptionsPlist=./EnterpriseExportOptionsPlist.plist

ADHOCExportOptionsPlist=${ADHOCExportOptionsPlist}
AppStoreExportOptionsPlist=${AppStoreExportOptionsPlist}
EnterpriseExportOptionsPlist=${EnterpriseExportOptionsPlist}

echo "~~~~~~~~~~~~选择打包方式(输入序号)~~~~~~~~~~~~~~~"
echo "		1 appstore"
echo "		2 adhoc"
echo "		3 enterprise"

# 读取用户输入并存到变量里
read parameter
sleep 0.5
method="$parameter"

# 判读用户是否有输入
if [ -n "$method" ]
then

#clean下
xcodebuild clean -xcodeproj ./$Project_Name/$Project_Name.xcodeproj -configuration $Configuration -alltargets

    if [ "$method" = "1" ]
    then

#appstore脚本
xcodebuild -project $Project_Name.xcodeproj -scheme $Project_Name -configuration $Configuration -archivePath build/$Project_Name-appstore.xcarchive clean archive build  CODE_SIGN_IDENTITY="${APPSTORECODE_SIGN_IDENTITY}" PROVISIONING_PROFILE="${APPSTOREROVISIONING_PROFILE_NAME}" PRODUCT_BUNDLE_IDENTIFIER="${AppStoreBundleID}"
xcodebuild -exportArchive -archivePath build/$Project_Name-appstore.xcarchive -exportOptionsPlist $AppStoreExportOptionsPlist -exportPath ~/Desktop/$Project_Name-appstore.ipa
    elif [ "$method" = "2" ]
    then
#adhoc脚本
xcodebuild -project $Project_Name.xcodeproj -scheme $Project_Name -configuration $Configuration -archivePath build/$Project_Name-adhoc.xcarchive clean archive build CODE_SIGN_IDENTITY="${ADHOCCODE_SIGN_IDENTITY}" PROVISIONING_PROFILE="${ADHOCPROVISIONING_PROFILE_NAME}" PRODUCT_BUNDLE_IDENTIFIER="${AdHocBundleID}"
xcodebuild -exportArchive -archivePath build/$Project_Name-adhoc.xcarchive -exportOptionsPlist $ADHOCExportOptionsPlist -exportPath ~/Desktop/$Project_Name-adhoc.ipa
    elif [ "$method" = "3" ]
    then
#企业打包脚本
xcodebuild -project $Project_Name.xcodeproj -scheme $Project_Name -configuration $Configuration -archivePath build/$Project_Name-enterprise.xcarchive clean archive build CODE_SIGN_IDENTITY="${ENTERPRISECODE_SIGN_IDENTITY}" PROVISIONING_PROFILE="${ENTERPRISEROVISIONING_PROFILE_NAME}" PRODUCT_BUNDLE_IDENTIFIER="${EnterpriseBundleID}"
xcodebuild -exportArchive -archivePath build/$Project_Name-enterprise.xcarchive -exportOptionsPlist $EnterpriseExportOptionsPlist -exportPath ~/Desktop/$Project_Name-enterprise.ipa
else
    echo "参数无效...."
    exit 1
    fi
fi
　　之前咱们讲过使用命令行打包下面咱们介绍使用脚本打包，其实脚本和命令行没有太大的本质区别。
https://www.cnblogs.com/rslai/p/9291159.html
IOS使用批处理打包

猜你喜欢
