HA高可用集群部署（ricci+luci+fence_virtd) 双机热备
点击Confirm Security Excepton
进入到管理服务器的luci界面，登陆时的密码是安装luci虚拟机的root密码
选择Manage Clusters，之后点击Create创建集群
如图，Cluster Name创建集群的名称，勾选Use the Same Passwordfor All Nodes，指的是所有结点所用的是相同的密码，填写要创建的结点名称和密码，名称是服务端的主机名，密码是上面提到的passwd ricci的修改的密码。勾选Download PackagesReboot和Enable，选择Create Cluster
正在创建节点，如图
创建完成，如图
创建完成之后，在服务端1和服务端2的/etc/cluster/下会生成cluster.conf文件，查看如下
[root@server1~]# cd /etc/cluster/
[root@server1cluster]# ls
cluster.conf cman-notify.d
[root@server1cluster]# cat cluster.conf #查看文件内容
<?xmlversion="1.0"?>
<clusterconfig_version="1" name="wen"> #集群名称
<clusternodes>
<clusternodename="server1.example.com" nodeid="1"/> #结点1
<clusternodename="server2.example.com" nodeid="2"/> #结点2
</clusternodes>
<cman expected_votes="1"two_node="1"/>
<fencedevices/>
<rm/>
</cluster>
2.安装fence_virtd、创建fence设备
1.安装、开启fence_virtd（管理端2）
[root@foundation29Desktop]# yum install fence-virtd* -y
[root@foundation29Desktop]# fence_virtd -c #设置
Modulesearch path [/usr/lib64/fence-virt]:
Availablebackends:
libvirt 0.1
Availablelisteners:
multicast 1.2
serial 0.4
Listenermodules are responsible for accepting requests
fromfencing clients.
Listenermodule [multicast]: #多播
Themulticast listener module is designed for use environments
wherethe guests and hosts may communicate over a network using
multicast.
Themulticast address is the address that a client will use to
sendfencing requests to fence_virtd.
MulticastIP Address [225.0.0.12]: #多播ip
Usingipv4 as family.
MulticastIP Port [1229]: #多播端口号
Settinga preferred interface causes fence_virtd to listen only
onthat interface. Normally, it listens onall interfaces.
Inenvironments where the virtual machines are using the host
machineas a gateway, this *must* be set (typically to virbr0).
Setto 'none' for no interface.
Interface[br0]:
Thekey file is the shared key information which is used to
authenticatefencing requests. The contents of thisfile must
bedistributed to each physical host and virtual machine within
acluster.
KeyFile [/etc/cluster/fence_xvm.key]: #key文件的路径
Backendmodules are responsible for routing requests to
theappropriate hypervisor or management layer.
Backendmodule [libvirt]:
Configurationcomplete.
===Begin Configuration ===
backends{
libvirt {
uri = "qemu:///system";
}
}
listeners{
multicast {
port = "1229";
family = "ipv4";
interface = "br0";
address = "225.0.0.12";
key_file ="/etc/cluster/fence_xvm.key";
}
}
fence_virtd{
module_path ="/usr/lib64/fence-virt";
backend = "libvirt";
listener = "multicast";
}
===End Configuration ===
Replace/etc/fence_virt.conf with the above [y/N]? y
[root@foundation29Desktop]# mkdir /etc/cluster #创建cluster目录
[root@foundation29Desktop]# cd /etc/cluster/
[root@foundation29cluster]# dd if=/dev/urandom of=fence_xvm.key bs=128 count=1 #生成文件
1+0records in
1+0records out
128bytes (128 B) copied, 0.000167107 s, 766 kB/s
[root@foundation29Desktop]# scp fence_xvm.key [email protected]:/etc/cluster/ #将文件传给服务端1
[email protected]'spassword:
fence_xvm.key 100% 512 0.5KB/s 00:00
测试
[root@server1cluster]# ls #查看
cluster.conf cman-notify.d fence_xvm.key
以同样的方法传送给服务端2
[root@foundation29Desktop]# systemctl start fence_fence_virtd.service #开启fence（由于管理端2是7.1的系统，开启时的命令不太一。如果是6.5系统，则用/etc/init.d/fence_virtd start即可）
2.创建fence设备
选择Fance Devices
选择Add,如下图，Name指的是添加fence设备的名称，写完之后选择Submit
结果
选择server1.example.com
点击Add Fence Method ,添加Method Name
如图，选择Add Tence Instance
填写Domin，选择Submit
完成之后，服务端2和服务端1的配置相同
测试
[root@server1cluster]# fence_node server2.example.com #测试server2的结点
fenceserver2.example.com success
[root@server2cluster]# fence_node server1.example.com #测试server1的结点
fenceserver1.example.com success
至此，高可用集群（HA）搭建完毕，可以根据自己的需要在上面铺设自己所需要的业���。