AWS Cloudformation入门项目实践

云迁移项目要求

创建IAM用户组，该用户组具有admin基础权限，并将IAM用户添加到用户组
创建VPC，并分别创建两个公有子网和私有子网，规划互联网网关和路由表
使用EC2服务分别在两个公有子网创建Web服务器，绑定EIP，使用安全组运行80（Web）和22（SSH）端口通过，自行下载安装好apache服务，并使用ELB进行负载分担
创建MySQL数据库服务器，规划安全组只允许位于公有子网的Web服务器能够访问
创建公开可读的S3存储桶，并在policy当中允许所有动作
创建CloudWatch账单告警，计费超过10美元时告警，并通过SNS发送邮件
代码及说明

Resources:
  # 创建IAM用户组，指定policy为允许全部
  MyGroup:
    Type: AWS::IAM::Group
    Properties: 
      GroupName: MyGroup
      Policies: 
        - PolicyName: MyPolicy
          PolicyDocument:
            Statement:
            - Effect: Allow
              Action:
              - "*"
              Resource: "*"
  
  # 创建IAM用户，将他归类到IAM用户组MyGroup
  MyUser:
    Type: AWS::IAM::User
    Properties:
      Groups: 
        - !Ref MyGroup
      LoginProfile: 
          Password: 12345Abc*
          PasswordResetRequired: true
      UserName: MyUser
  
  # 新建一个VPC
  MyVPC:
    Type: AWS::EC2::VPC
    Properties:
      CidrBlock: 192.168.0.0/16
  
  # 新建子网PublicSubnet01和02，给Web服务器使用
  PublicSubnet01:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone: ap-northeast-1a
      VpcId: !Ref MyVPC
      CidrBlock: 192.168.10.0/24

  PublicSubnet02:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone: ap-northeast-1c
      VpcId: !Ref MyVPC
      CidrBlock: 192.168.11.0/24
  
  # 新建子网PrivateSubnet03和04，给数据库服务器使用
  PrivateSubnet03:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone: ap-northeast-1a
      VpcId: !Ref MyVPC
      CidrBlock: 192.168.20.0/24

  PrivateSubnet04:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone: ap-northeast-1c
      VpcId: !Ref MyVPC
      CidrBlock: 192.168.21.0/24
  
  # 新建互联网网关IGW
  MyIGW:
    Type: AWS::EC2::InternetGateway
  
  # 将创建好的IGW与自己的VPC相关联
  VPCGatewayAttach:
    Type: AWS::EC2::VPCGatewayAttachment
    Properties:
      InternetGatewayId: !Ref MyIGW
      VpcId: !Ref MyVPC
  
  # 新建路由表
  MyRTB:
    Type: AWS::EC2::RouteTable
    Properties:
      VpcId: !Ref MyVPC
  
  # 创建默认路由，指向互联网网关IGW
  RoutetoIGW:
    Type: AWS::EC2::Route
    Properties:
      DestinationCidrBlock: 0.0.0.0/0
      RouteTableId: !Ref MyRTB
      GatewayId: !Ref MyIGW
  
  # 将路由表和公有子网显式关联，以使公有子网可以访问外网 
  AssociateSubnetandRTB:
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      RouteTableId: !Ref MyRTB
      SubnetId: !Ref PublicSubnet01

  AssociateSubnetandRTB2:
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      RouteTableId: !Ref MyRTB
      SubnetId: !Ref PublicSubnet02
  
  # 创建安全组，允许TCP的80（Web）和22（SSH）端口流量通过
  # 并将该安全组归到自己的VPC当中
  MySG:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupName: MySG
      GroupDescription: Enable SSH and Web for EC2
      SecurityGroupIngress:
        - IpProtocol: tcp
          FromPort: 80
          ToPort: 80
          CidrIp: 0.0.0.0/0
        - IpProtocol: tcp
          FromPort: 22
          ToPort: 22
          CidrIp: 0.0.0.0/0
      VpcId: !Ref MyVPC
  
  # 创建两台Web用的EC2服务器，并从公有子网启动
  MyEC2Server01:
    Type: AWS::EC2::Instance
    Properties:
      # 注意这里不是在默认的VPC当中创建，所以只能用ID去指定安全组
      SecurityGroupIds:
        - !GetAtt MySG.GroupId
      InstanceType: t2.micro
      AvailabilityZone: ap-northeast-1a
      # 我这里选择的镜像是Amazon Linux 2 5.10
      ImageId: ami-0de5311b2a443fb89
      # 提前在服务器上安装好apache的服务，设置开机自启
      UserData: !Base64 |
        #!/bin/bash
        sudo yum upgrade -y
        sudo yum install -y httpd
        sudo systemctl start httpd
        sudo systemctl enable httpd
      SubnetId: !Ref PublicSubnet01
  
  MyEC2Server02:
    Type: AWS::EC2::Instance
    Properties:
      SecurityGroupIds:
        - !GetAtt MySG.GroupId
      InstanceType: t2.micro
      AvailabilityZone: ap-northeast-1c
      ImageId: ami-0de5311b2a443fb89
      UserData: !Base64 |
        #!/bin/bash
        sudo yum update -y
        sudo yum install -y httpd
        sudo systemctl start httpd
        sudo systemctl enable httpd
      SubnetId: !Ref PublicSubnet02
  
  # 分别创建两个EIP，附属到我们两台Web服务器上
  MyEip1:
    Type: AWS::EC2::EIP
    Properties:
      InstanceId: !Ref MyEC2Server01
      NetworkBorderGroup: ap-northeast-1
  
  MyEip2:
    Type: AWS::EC2::EIP
    Properties:
      InstanceId: !Ref MyEC2Server02
      NetworkBorderGroup: ap-northeast-1

  # 创建负载均衡器所用使用的目标组
  MyTargetGroup:
    Type: AWS::ElasticLoadBalancingV2::TargetGroup
    Properties:
      Port: 80
      Protocol: HTTP
      Targets:
        - Id: !Ref MyEC2Server01
          Port: 80
        - Id: !Ref MyEC2Server02
          Port: 80
      VpcId: !Ref MyVPC

  # 创建应用型负载均衡器ALB
  # 注意ELB V1版本是给CLB用的，已经过时了
  MyALB:
    Type: AWS::ElasticLoadBalancingV2::LoadBalancer
    Properties:
      Type: application
      Subnets:
        - !Ref PublicSubnet01
        - !Ref PublicSubnet02
      SecurityGroups: 
        - !GetAtt MySG2.GroupId

  # 创建ALB专用的安全组，允许访问TCP的80（Web）端口流量通过
  MySG2:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupName: MySG2
      GroupDescription: Enable Web for ELB
      VpcId: !Ref MyVPC
      SecurityGroupIngress:
        - IpProtocol: tcp
          FromPort: 80
          ToPort: 80
          CidrIp: 0.0.0.0/0
  
  # 为我们的ALB创建侦听器，一旦有访问我们的目标组的流量
  # 我们就给它forward到我们的ALB上进行负载均衡
  MyListener:
    Type: AWS::ElasticLoadBalancingV2::Listener
    Properties:
      DefaultActions:
        - Type: forward
          TargetGroupArn: !Ref MyTargetGroup
      LoadBalancerArn: !Ref MyALB
      Port: 80
      Protocol: HTTP

  # 创建数据库实例，并选择数据库引擎为MySQL
  MySQLServer:
    Type: AWS::RDS::DBInstance
    Properties:
      AllocatedStorage: 20
      AvailabilityZone: ap-northeast-1a
      MasterUsername: root
      MasterUserPassword: 12345Abc*
      DBInstanceClass: db.t2.small
      DBSubnetGroupName: !Ref MyDBSubnetGroup
      Engine: MySQL
      VPCSecurityGroups:
        - !Ref MySG3

  # 创建子网组，以便数据库随时可以开启Multi-AZ
  MyDBSubnetGroup:
    Type: AWS::RDS::DBSubnetGroup
    Properties:
      DBSubnetGroupDescription: My SubnetGroup for DB Subnet
      SubnetIds:
        - !Ref PrivateSubnet03
        - !Ref PrivateSubnet04
  
  # 创建数据库服务器专用安全组
  MySG3:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupName: MySG3
      GroupDescription: Enable MySQL for EC2
      VpcId: !Ref MyVPC
      SecurityGroupIngress:
        - IpProtocol: tcp
          FromPort: 3306
          ToPort: 3306
          # 这里设置为凡是在安全组MySG内的EC2服务器都能访问
          SourceSecurityGroupId: !Ref MySG
  
  # 创建S3的存储桶，允许公开可读
  MyPublicBucket:
    Type: AWS::S3::Bucket
    Properties:
      AccessControl: PublicRead
      # 注意存储桶名称需要全区域唯一
      BucketName: mypublicbucket-ap-northeast-1
  
  # 创建存储桶所使用的策略，我这边给的是全部
  MyBucketPolicy:
    Type: AWS::S3::BucketPolicy
    Properties:
      Bucket: !Ref MyPublicBucket
      PolicyDocument:
        Statement:
          Effect: Allow
          Action:
            - s3:*
          Principal: "*"
          Resource: !GetAtt MyPublicBucket.Arn

  # 创建账单警告，6小时内超过10美元则告警
  MyBillingAlarm:
    Type: AWS::CloudWatch::Alarm
    Properties:
      MetricName: EstimatedCharges
      Namespace: AWS/Billing
      AlarmActions: 
        - !Ref MySNSTopic 
      Dimensions:
        - Name: Currency
          Value: USD
      Statistic: Maximum
      Period: 21600
      EvaluationPeriods: 1
      ComparisonOperator: GreaterThanThreshold
      Threshold: 10

  # 创建消息服务，一旦超过10美元就给我发送邮件   
  MySNSTopic:
    Type: AWS::SNS::Topic
    Properties: 
      TopicName: MySNSTopic
      Subscription:
        # 在Endpoint中填写可用的邮箱地址，需要去邮箱确认
        - Endpoint: [email protected]
          Protocol: email
AWS Cloudformation入门项目实践

云迁移项目要求

代码及说明

猜你喜欢
