文章目录
-
- 1、display cpu-usage
- 2、display cpu-usage configuration
- 3、display device
- 4、display diagnostic-information
- 5、display elabel
- 6、display esn
- 7、display fan
- 8、display health
- 9、display memory-alloc mid
- 10、display memory-usage
- 11、display memory-usage process vrp
- 12、display memory-usage threshold
- 13、display power
- 14、display power system
- 15、display sn
- 16、display temperature
- 17、display transceiver
- 18、display version
- 19、display dyinggasp capacity
1、display cpu-usage
查看设备CPU占用率的统计信息
命令格式
display cpu-usage [ slot slot-id ]
display cpu-usage [ process process-id ] [ slave ]
使用示例
查看主用主控板的CPU占用率的统计信息
<Huawei> display cpu-usage
CPU Usage Stat. Cycle: 10 (Second)
CPU Usage Stat. Time : 2013-09-24 10:11:55
Control Plane
CPU Usage: 23.3% Max: 100%
User: 10.7% System: 6.9% SoftIrq: 0.0% HardIrq: 5.5% Idle: 76.7%
CPU utilization for ten seconds: 23.3% one minute: 22.0% five minutes: 2
3.0% .
Data Plane
CPU Usage: 1.7% Max: 100%
CPU utilization for ten seconds: 1.7% one minute: 1.6% five minutes:
1.6% .
PID ProcessName CPU% CoreIndex Runtime State
194 cap32 1.7% CPU1 26132042 R
193 vrp 20.0% CPU0 11216335 S
191 monitor 0.0% CPU0 2324 S
74 loop0 0.0% CPU0 1913 S
13 bdi-default 0.0% CPU0 977 S
7 events/0 0.0% CPU0 708 S
138 k3gdevd 0.0% CPU0 423 S
192 cap32 0.0% CPU0 211 S
12 sync_supers 0.0% CPU0 204 S
56 VFDS 0.0% CPU0 166 S
1 init 0.0% CPU0 90 S
19 kswapd0 0.0% CPU0 63 S
30 mtdblockd 0.0% CPU0 35 S
16 khubd 0.0% CPU0 10 S
2 kthreadd 0.0% CPU0 0 S
3 migration/0 0.0% CPU0 0 S
4 ksoftirqd/0 0.0% CPU0 0 S
5 migration/1 0.0% CPU0 0 S
6 ksoftirqd/1 0.0% CPU0 0 S
8 events/1 0.0% CPU0 0 R
9 cpuset 0.0% CPU0 0 S
10 khelper 0.0% CPU0 0 S
11 async/mgr 0.0% CPU0 0 S
14 kblockd/0 0.0% CPU0 0 S
15 kblockd/1 0.0% CPU0 0 S
20 aio/0 0.0% CPU0 0 S
21 aio/1 0.0% CPU0 0 S
22 crypto/0 0.0% CPU0 0 S
23 crypto/1 0.0% CPU0 0 S
29 sdcardqueue 0.0% CPU0 0 S
139 k3gtxd 0.0% CPU0 0 S
153 udpsvd 0.0% CPU0 0 S
271 loop1 0.0% CPU0 0 S
486 flush-mtd-unmap 0.0% CPU0 0 S
项目 | 描述 |
---|---|
CPU Usage Stat. Cycle | CPU占用率统计周期,默认统计周期为10秒。 |
CPU Usage Stat. Time | 最近一次统计CPU占用率的时刻。 |
Control Plane | 最近一次统计到的控制平面的CPU的占用率。 |
Data Plane | 最近一次统计到的转发平面的CPU的占用率。 |
CPU Usage | 当前CPU占用率。 |
Max | 表示CPU占用率的历史最大值。 |
User | 用户状态的占用率。 |
System | 内核运行的占用率。 |
SoftIrq | 软中断运行的占用率。 |
HardIrq | 硬中断运行的占用率。 |
Idle | 空闲状态的占用率。 |
CPU utilization for ten seconds | 10秒内的CPU占用率。 |
one minute | 1分钟内的CPU占用率。 |
five minutes | 5分钟内的CPU占用率。 |
PID | 设备上运行的进程号。 |
ProcessName | 设备上运行的进程名称。 |
CPU% | 表示各个任务在CPU占用率中所占的比重。 |
CoreIndex | CPU的索引号。 |
Runtime | 从设备启动到目前的运行时间。 |
State | 设备当前正在运行的进程的状态。枚举类型,取值范围: R:可执行状态。 S:可中断的睡眠状态。 D:不可中断的睡眠状态。 T:暂停状态或跟踪状态。 Z:退出状态,进程成为僵尸进程。 X:退出状态,进程即将被销毁。 |
2、display cpu-usage configuration
查看设备CPU占用率的配置信息
命令格式
display cpu-usage configuration [ slave | slot slot-id ]
使用示例 查看主控板的CPU占用率的配置信息
<Huawei> display cpu-usage configuration
Master Board:
The CPU usage monitor is turned on.
The CPU thread usage monitor is turned on.
The current monitor cycle is 10 seconds.
The current monitor warning threshold is 80%.
The current monitor restore threshold is 75%.
3、display device
查看设备的部件类型及状态信息
命令格式
display device [ slot slot-id ]
使用示例
查看设备的部件信息
<Huawei> display device
AR2240's Device status:
Slot Sub Type Online Power Register Alarm Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 - 2FE Present PowerOn Registered Normal NA
2 - 1SA Present PowerOn Registered Normal NA
3 - 1CPOS-155M Present PowerOn Registered Normal NA
4 - 1ADSL-A/M Present PowerOn Registered Normal NA
5 - 8FE1GE Present PowerOn Registered Normal NA
6 - - Present PowerOff Unregistered TimeOutReg NA
8 - 1STM4 Present PowerOn Registered Normal NA
11 - SRU40 Present PowerOn Registered Normal Master
9 - PWR350A Present PowerOn Registered Normal NA
12 - FAN Present PowerOn Registered Normal NA
项目 | 描述 |
---|---|
Slot | 部件所插槽位的槽位号。 |
Sub | 子卡号。 |
Type | 部件的具体类型。 |
Online | 部件是否正常在位。 Present:表示正常在位。 Absent:表示不在位。 |
Power | 部件是否加电。 PowerOn:表示已加电。 PowerOff:表示已下电。 NA:表示状态不可知。 当设备重启后可能会出现此信息。 |
Register | 部件是否注册。 Registered:表示已注册。 Unregistered:表示未注册。 |
Alarm | 部件状态是否正常。在单板下电时,会显示部件下电原因。 Normal:表示部件运行正常。 PowerSetFail:表示命令设置上电失败。 Nonsupport:表示当前版本不支持单板/当前主控不支持某槽位单板。 TimeOutReg:表示单板长时间不注册。 UserSetOff:表示命令行设置下电。 LackPower:表示功率不足。 InfoGetFail:表示获取单板信息异常。 |
Primary | 单板的主备状态。Slave表示备用单板,Master表示主用单板。其他部件显示“NA”。 |
查看设备槽位1的部件信息
<Huawei> display device slot 1
AR2240's Device status:
Slot Sub Type Online Power Register Alarm Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 - 8FE1GE Present PowerOn Registered Normal NA
-------------------------------------------------------------------------------
Board Name : 8FE1GE
Board Description : 9-port 8FE/1GE L2/L3 Ethernet Interface Card
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Port Port Optic MDI Speed Duplex Flow- Port POE
Type Status (Mbps) Ctrl State State
-------------------------------------------------------------------------------
0 ETH(C) - auto 100 full disable up -
1 ETH(C) - auto 100 full disable up -
2 ETH(C) - auto 100 full disable up -
3 ETH(C) - auto 100 full disable down -
4 ETH(C) - auto 100 full disable down -
5 ETH(C) - auto 100 full disable down -
6 ETH(C) - auto 100 full disable down -
7 ETH(C) - auto 100 full disable down -
8 GE(C) - auto 1000 full disable up -
-------------------------------------------------------------------------------
项目 | 描述 |
---|---|
Slot | 部件所插槽位的槽位号。 |
Sub | 子卡号。 |
Type | 部件的具体类型。 |
Online | 部件状态为Present,表示正常在位。 |
Power | 部件加电状态为PowerOn,表示已加电。 |
Register | 部件注册状态为Registered,表示已注册。 |
Alarm | 部件状态为Normal,表示部件运行正常。 |
Primary | 单板的主备状态。Slave表示备用单板,Master表示主用单板。其他部件显示“NA”。 |
Board Name | 对应槽位号在位的单板名称。 |
Board Description | 对应槽位号在位的单板描述。 |
Port | 对应槽位号在位单板的接口编号。 |
Port Type | 对应槽位号在位单板的接口类型。 |
Optic Status | 光模块的在位状态。 |
MDI | 接口的网线类型,包括: across:交叉网线。 auto:自动识别网线。 normal:直通网线。 |
Speed (Mbps) | 对应槽位号接口的接口速率,单位:每秒兆比特。 |
Duplex | 对应槽位号接口的双工模式,包括: half:半双工模式。 full:双工模式。 |
Flow-Ctrl | 对应槽位号接口的流控方式: enable:打开流量控制开关。 disable:关闭流量控制开关。 |
Port State | 对应槽位号接口的接口状态: up:打开。 down:关闭。 |
POE State | 对应槽位号接口的PoE状态。 |
4、display diagnostic-information
一键式采集并查看设备当前的诊断信息或将诊断信息存储在指定压缩包文件
命令格式
display diagnostic-information [ file-name ]
使用示例
查看设备当前的诊断信息
<Huawei> display diagnostic-information
===================================================
===============display version===============
===================================================
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.120 (AR2200 V200R003C00)
Copyright (C) 2011-2012 HUAWEI TECH CO., LTD
Huawei AR2240 Router uptime is 0 week, 1 day, 0 hour, 11 minutes
BKP 0 version information:
1. PCB Version : AR01BAK2B VER.A
2. If Supporting PoE : No
3. Board Type : AR2240
4. MPU Slot Quantity : 1
5. LPU Slot Quantity : 8
MPU 11(Master) : uptime is 0 week, 1 day, 0 hour, 11 minutes
SDRAM Memory Size : 2048 M bytes
Flash Memory Size : 16 M bytes
NVRAM Memory Size : 512 K bytes
SD Card1 Memory Size : 1882 M bytes
MPU version information :
1. PCB Version : AR01SRU3A VER.B
2. MAB Version : 0
3. Board Type : SRU40
4. CPLD0 Version : 104
5. CPLD1 Version : 104
6. BootROM Version : 604
LPU 1 : uptime is 0 week, 1 day, 0 hour, 8 minutes
SDRAM Memory Size : 96 K bytes
Flash Memory Size : 384 K bytes
LPU version information :
1. PCB Version : AR01SEG1CA VER.B
2. MAB Version : 0
3. Board Type : 2FE
4. BootROM Version : cb
LPU 5 : uptime is 0 week, 1 day, 0 hour, 7 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 16 M bytes
LPU version information :
1. PCB Version : AR01WMF9TTA VER.B
2. MAB Version : 0
3. Board Type : 8FE1GE
4. BootROM Version : 213
5. BootLoad Version : 510
FAN version information :
1. PCB Version : AR01DF05A VER.A
2. Board Type : FAN
3. Software Version : 103
=================================================
===============display clock===============
=================================================
2012-09-05 11:15:23
Wednesday
Time Zone(Default Zone Name) : UTC+00:00
==================================================
===============display device===============
==================================================
AR2240's Device status:
Slot Sub Type Online Power Register Alarm Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 - 2FE Present PowerOn Registered Normal NA
5 - 8FE1GE Present PowerOn Registered Normal NA
11 - SRU40 Present PowerOn Registered Normal Master
9 - PWR350A Present PowerOn Registered Normal NA
12 - FAN Present PowerOn Registered Normal NA
……
将设备的诊断信息保存到flash里的aa.txt文件中
<Huawei> display diagnostic-information flash:/aa.txt
This operation will take several minutes, please wait.........................
..................................................................
Info: The diagnostic information was saved to the device successfully..
5、display elabel
查看设备的电子标签信息
命令格式
display elabel [ slot-id ] [ brief ]
display elabel backplane
使用示例
查看1号槽位单板的电子标签简要信息
<Huawei> display elabel 1 brief
It is executing, please wait...
[Slot_1]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR01SEF2TA
BarCode=020XTQ10BA000063
Item=03020XTQ
Description=AR,AR01SEF2TA,2-Port FE WAN Interface Card,1*2
Manufactured=2011-10-15
VendorName=Huawei
IssueNumber=00
CLEICode=56324
BOM=02352868
查看设备的电子标签详细信息
<Huawei> display elabel
It is executing, please wait...
/$[System Integration Version]
/$SystemIntegrationVersion=3.0
[Rack_1]
[SubRack_0]
[BackPlane_0]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR0B0024BA
BarCode=2102113373P0BA000130
Item=02113373
Description=AR2200,AR0B0024BA,AR2240 CHASSIS
Manufactured=2011-10-10
VendorName=Huawei
IssueNumber=00
CLEICode=56325
BOM=02352869
[Slot_0]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR01WMF9TTA
BarCode=020XTN10BA000044
Item=03020XTN
Description=AR,AR01WMF9TTA ,8-Port 10/100BASE(RJ45) and 1-Port 10/100/1000BASE(R
J45)-L2/L3 Ethernet Interface Card ,1*1
Manufactured=2011-10-11
VendorName=Huawei
IssueNumber=00
CLEICode=56326
BOM=02352870
[Slot_9]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR01PSAC35
BarCode=2102310CWN10B6000195
Item=02310CWN
Description=AR Series,AR01PSAC35,350W AC Power Module
Manufactured=2011-06-09
VendorName=Huawei
IssueNumber=00
CLEICode=56327
BOM=02352871
[Slot_12]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR01DF05A
BarCode=21021206134JB9000205
Item=02120613
Description=AR2200,AR01DF05A,Fan Box For AR2240
Manufactured=2011-09-21
VendorName=Huawei
IssueNumber=00
CLEICode=56328
BOM=02352872
查看背板的电子标签
<Huawei> display elabel backplane
It is executing, please wait...
[BackPlane_0]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=AR0B0024BA
BarCode=2102113373P0BA000130
Item=02113373
Description=AR2200,AR0B0024BA,AR2240 CHASSIS
Manufactured=2011-10-10
VendorName=Huawei
IssueNumber=00
CLEICode=56329
BOM=02352873
6、display esn
查看设备的序列号ESN(Equipment Serial Number)
命令格式
display esn
使用示例
显示设备的ESN
<Huawei> display esn
ESN of device: 2102113374P0B4000046
7、display fan
查看风扇的状态
命令格式
display fan
使用示例
查看设备的风扇状态
<Huawei> display fan
------------------------------------------------------------------
FanId FanNum Present Register Speed Mode
------------------------------------------------------------------
12 [1-5] YES YES 34% AUTO
1 2100
2 2040
3 2100
4 2130
5 2100
8、display health
查看设备的健康状况
命令格式
display health
使用示例
查看设备健康状况
<Huawei> display health
--------------------------------------------------------------------------------
Slot Card Sensor No. SensorName Status Upper Lower Temp(C)
--------------------------------------------------------------------------------
1 - 1 8FE1GE TEMP NORMAL 85 0 45
5 - 1 8FE1GE TEMP NORMAL 85 0 45
11 - 1 SRU40 TEMP NORMAL 70 0 50
--------------------------------------------------------------------------
PowerNo Present Mode State Current(A) Voltage(V) Power(W)
--------------------------------------------------------------------------
9 YES AC Supply N/A 12 350
10 NO N/A N/A N/A N/A N/A
------------------------------------------------------------------
FanId FanNum Present Register Speed Mode
------------------------------------------------------------------
12 [1-5] YES YES 35% AUTO
1 2100
2 2100
3 2100
4 2160
5 2130
The total power is : 350.000(W)
The remain power is : 272.000(W)
The system used power detail information :
-------------------------------------------------------------------------------
SlotID BoardType Power-Used(W) Power-Requested(W)
-------------------------------------------------------------------------------
1 8FE1GE 3.010 4
5 8FE1GE 9.530 13
11 SRU40 42.000 61
System CPU Usage Information:
System cpu usage at 2012-09-05 15:02:35 570 ms
-------------------------------------------------------------------------------
SlotID CPU Usage Upper Limit
-------------------------------------------------------------------------------
5 4 % 80%
11 6 % 80%
System Memory Usage Information:
System memory usage at 2012-09-05 15:02:35 640 ms
-------------------------------------------------------------------------------
SlotID Total Memory(MB) Used Memory(MB) Used Percentage Upper Limit
-------------------------------------------------------------------------------
5 176 20 11% 95%
11 1257 194 15% 95%
System Disk Usage Information:
System disk usage at 2012-09-05 15:02:35 710 ms
-------------------------------------------------------------------------------
SlotID Device Total Available Used Memory(MB) Used Percentage
Memory(MB)
-------------------------------------------------------------------------------
11 sd1: 1882.51 1000.51 53.15%
flash: 2.00 0.18 9.00%
项目 | 描述 |
---|---|
Slot | 物理器件所在的槽位号。 |
Card | 子卡号。 |
Sensor No. | 物理器件上的传感器编号。 |
SensorName | 物理器件上的传感器名称。 |
Status | 物理器件的状态。 NORMAL:表示对应槽位号物理器件的温度状态正常。 ABNORMAL:表示对应槽位号物理器件的温度超出允许范围。 |
Upper | 温度的上限值。 |
Lower | 温度的下限值。 |
Temperature.© | 物理器件当前的温度值。 |
PowerNo | 电源模块编号。 |
Present | 电源是否在位,其中: YES:表示电源在位。 NO:表示电源不在位。 |
Mode | 电源模式。其中: DC:直流电源。 AC:交流电源。 |
State | 电源状态。 NotSupply:无电流输出。 Supply:有电流输出。 |
Current(A) | 电源供电电流。目前固定显示“N/A”。 |
Voltage(V) | 电源额定电压。 |
Power(W) | 电源额定功率。 |
FanId | 风扇的ID。 |
FanNum | 风扇的数目。 |
Present | 风扇是否在位。其中: YES:表示风扇在位。 NO:表示风扇不在位。 |
Register | 风扇是否注册。其中: YES:表示风扇已注册。 NO:表示风扇没有注册。 |
Speed | 风扇转速。表示为当前风扇转速与全速运转时的百分比,或风扇的实际转速,单位转/分钟。 |
Mode | 风扇的工作模式。 AUTO:自动模式。 MANUAL:手动模式。 |
BoardType | 单板类型。 |
Power-Used(W) | 单板消耗的功率。 |
Power-Requested(W) | 单板最大的功率。 |
CPU Usage | 单板CPU的占用率。 |
Upper Limit | 触发设备产生告警的CPU占用率的上限阈值。通过执行命令set cpu-usage threshold [ slot slot-id ]进行配置。 |
Total Memory(MB) | 单板内存总量。 |
Used Memory(MB) | 单板内存的使用量。 |
Used Percentage | 单板内存的使用率。 |
Device | 设备存储介质名称。 |
9、display memory-alloc mid
查看指定模块申请内存的情况
命令格式
display memory-alloc mid mid
使用示例
查看ACL模块申请内存的情况
<Huawei> display memory-alloc mid 0XC06C0000
==================================================
********************************************************************************
PtNo UsedMemory(B) UsedBlockNum AllocTimes FreeTimes PtName
--------------------------------------------------------------------------------
1 1007552 15 17 2 USRPT
********************************************************************************
10、display memory-usage
查看设备的内存占用率信息
命令格式
display memory-usage [ slave | slot slot-id ]
使用示例
查看当前主用主控板的内存占用率信息
<Huawei> display memory-usage
Memory utilization statistics at 2008-12-15 15:17:42 746 ms
System Total Memory Is: 394152720 bytes
Total Memory Used Is: 130975664 bytes
Memory Using Percentage Is: 33%
查看2号槽位的接口板内存占用率信息
<Huawei> display memory-usage slot 2
Slot 2/0 Memory utilization Info:
Memory utilization statistics at 2008-12-15 15:08:58 532 ms
System Total Memory Is: 59656976 bytes
Total Memory Used Is: 16651852 bytes
Memory Using Percentage Is: 27%
11、display memory-usage process vrp
查看当前VRP进程内存占用率的统计信息
命令格式
display memory-usage process vrp [ slave ]
使用示例
查看VRP进程内存占用率的统计信息
<Huawei> display memory-usage process vrp
Memory utilization statistics at 2013-07-10 09:55:20 729 ms
The current memory of vrp process:
Totalram : 253755392 bytes
Total Memory Used Is : 212461632 bytes
Memory Using Percentage Is: 83%
12、display memory-usage threshold
查看设备的内存占用率阈值
命令格式
display memory-usage threshold [ all | slot slot-id | slave ]
使用示例
查看主用主控板内存占用率阈值
<Huawei> display memory-usage threshold
Current memory threshold of the main board is 95%.
查看设备主用主控板和所有单板的内存占用率阈值
<Huawei> display memory-usage threshold all
Current memory threshold of the main board is 95%.
Current memory threshold of the slot 1 is 95%.
13、display power
查看设备电源信息
命令格式
display power
使用示例
查看设备的电源状态
<Huawei> display power
-------------------------------------------------------------------------
PowerNo Present Mode State Current(A) Voltage(V) Power(W)
--------------------------------------------------------------------------
9 NO N/A N/A N/A N/A N/A
10 YES AC Supply N/A 12 350
14、display power system
查看设备系统功率和单板功率等信息
命令格式
display power system
使用示例
查看设备的功率信息
<Huawei> display power system
The backup-mode is : 1:0
The total power is : 350.000(W)
The remain power is : 235.000(W)
The system used power detail information :
-------------------------------------------------------------------------------
SlotID BoardType Power-Used(W) Power-Requested(W)
-------------------------------------------------------------------------------
1 8FE1GE 9.476 13
5 8FE1GE 9.476 13
11 SRU40 42.000 61
16 FAN 14.000 28
项目 | 描述 |
---|---|
The backup-mode is | 电源模式,其中 1:0:设备配置单电源模块。 1:1:设备配置双电源模块。 |
The total power is | 设备总功率。 |
The remain power is | 设备剩余功率。 |
The system used power detail information | 系统所用功率的详细信息。 |
SlotID | 部件所在槽位号。 |
BoardType | 对应槽位号在位的部件类型。 |
Power-Used(W) | 部件已使用的功率。 |
Power-Requested(W) | 系统给部件分配的固定功率。 |
15、display sn
查看设备上部件的序列号SN(Serial Number)
命令格式
display sn [ [ interface ] abnormal | all | interface interface-type interface-number | license | slot slot-id ]
使用示例
查看设备的SN信息
<Huawei> display sn
Equipment SN(ESN): AR00050123456789
License ESN: AR00050123456789
Slot Sub Type SN P/N
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 - 2FE 020XTQ10C3000017 03020XTQ
2 - 1SA 020YNB10B5000151 03020YNB
3 - 1CPOS-155M 021AQU10C1000041 03021AQU
4 - 1ADSL-A/M 020XTT10B5000153 03020XTT
5 - 8FE1GE 020XTN10BA000044 03020XTN
8 - 1STM4 021XHD10E1000001 03021XHD
11 - SRU40 AR00050123456789 02129615
9 - PWR350A 2102310CWN10B6000195 02310CWN
12 - FAN 21021206134JB9000205 02120613
查看设备存在异常的槽位的SN信息
<Huawei> display sn abnormal
Slot Sub Type SN P/N State
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 - 2FE 020XTQ10C3000017 03020XTQ TimeOutReg
16、display temperature
查看设备的温度信息
命令格式
display temperature { all | slot slot-id }
display temperature slot fan
使用示例
查看设备所有单板的温度信息
<Huawei> display temperature all
--------------------------------------------------------------------------------
Slot Card Sensor No. SensorName Status Upper Lower Temp(C)
--------------------------------------------------------------------------------
1 - 1 8FE1GE TEMP NORMAL 85 0 45
5 - 1 8FE1GE TEMP NORMAL 85 0 45
11 - 1 SRU40 TEMP NORMAL 55 0 50
查看设备1号槽位单板的温度信息
<Huawei> display temperature slot 1
--------------------------------------------------------------------------------
Slot Card Sensor No. SensorName Status Upper Lower Temp(C)
--------------------------------------------------------------------------------
1 - 1 8FE1GE TEMP NORMAL 85 0 45
查看风扇模块的温度信息
<Huawei> display temperature slot fan
---------------------------------------------------------------------------
Slot Card Sensor No. SensorName Status Upper Lower Temp(C)
---------------------------------------------------------------------------
12 - 1 Hot Point NORMAL 65 0 39
17、display transceiver
查看设备接口上的光模块信息
命令格式
display transceiver [ interface interface-type interface-number | controller controller-type controller-number | slot slot-id ] [ verbose ]
使用示例
查看指定端口光模块的常规、制造、告警信息
<Huawei> display transceiver interface gigabitethernet 1/0/0
GigabitEthernet1/0/0 information:
-------------------------------------------------------------
Electronic label information:
Description :2100Mb/sec-850nm-LC-MM-500m(0.05mm)300m(0.0625mm)
Type :PLRXPL-VI-S24-HW
VendorSN :CA21QQ2Z8
Manufacturing Date :2010-05-25
Manufacturer :JDSU
-------------------------------------------------------------
Alarm information:
RX power low
-------------------------------------------------------------
查看指定端口光模块的常规、制造、告警以及诊断信息
<Huawei> display transceiver interface gigabitethernet 1/0/0 verbose
GigabitEthernet1/0/0 information:
-------------------------------------------------------------
Electronic label information:
Description :2100Mb/sec-850nm-LC-MM-500m(0.05mm)300m(0.0625mm)
Type :PLRXPL-VI-S24-HW
VendorSN :CA21QQ2Z8
Manufacturing Date :2010-05-25
Manufacturer :JDSU
-------------------------------------------------------------
Alarm information:
RX power low
-------------------------------------------------------------
Realtime information:
Temperature(℃) :35
Voltage(V) :3.30
Bias Current(mA) :4.08
Bias High Threshold(mA) :18.57
Bias Low Threshold(mA) :1.07
Current Rx Power(dBM) :-31.54
Default Rx Power High Threshold(dBM) :0.00
Default Rx Power Low Threshold(dBM) :-16.98
Current Tx Power(dBM) :-5.01
Default Tx Power High Threshold(dBM) :0.00
Default Tx Power Low Threshold(dBM) :-9.50
User Set Rx Power High Threshold(dBM) :0.00
User Set Rx Power Low Threshold(dBM) :-16.98
User Set Tx Power High Threshold(dBM) :0.00
User Set Tx Power Low Threshold(dBM) :-9.50
Default Temperature high Threshold(℃) :85
Default Temperature low Threshold(℃) :-40
-------------------------------------------------------------
项目 | 描述 |
---|---|
Electronic label information | 光模块的电子标签信息。 |
Description | 信息描述。 |
Type | 光模块类型。 |
VendorSN | 光模块生产序列号。 |
Manufacturing Date | 光模块生产日期。 |
Manufacturer | 光模块制造厂商名称。 |
Alarm information | 光模块的告警信息。 |
RX power low | 光模块接收功率低的告警。 |
Realtime information | 光模块的实时信息。 |
Temperature(°C) | 光模块当前温度。 |
Voltage(V) | 光模块当前电压。 |
Bias Current (mA) | 光模块偏置电流。 |
Bias High Threshold(mA) | 光模块偏置电流上限。 |
Bias Low Threshold(mA) | 光模块偏置电流下限。 |
Current RX Power(dBM) | 光模块当前接收功率。 |
Default RX Power High Threshold (dBM) | 默认光模块接收功率上限。 |
Default RX Power Low Threshold (dBM) | 默认光模块接收功率下限。 |
Current TX Power(dBM) | 光模块发送功率。 |
Default TX Power High Threshold(dBM) | 光模块发送功率上限。 |
Default TX Power Low Threshold(dBM) | 光模块发送功率下限。 |
User Set Rx Power High Threshold(dBM) | 用户设置光模块接收功率上限。 |
User Set Rx Power Low Threshold(dBM) | 用户设置光模块接收功率下限。 |
User Set Tx Power High Threshold(dBM) | 用户设置光模块发送功率上限。 |
User Set Tx Power Low Threshold(dBM) | 用户设置光模块发送功率下限。 |
Default Temperature high Threshold (°C) | 默认光模块温度上限。 |
Default Temperature low Threshold (°C) | 默认光模块温度下限。 |
18、display version
查看设备的版本信息
命令格式
display version [ slot slot-id ]
display version slot fan
使用示例
查看设备的版本信息
<Huawei> display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.120 (AR2200 V200R003C00)
Copyright (C) 2011-2012 HUAWEI TECH CO., LTD
Huawei AR2240 Router uptime is 0 week, 1 day, 5 hours, 10 minutes
BKP 0 version information:
1. PCB Version : AR01BAK2B VER.A
2. If Supporting PoE : No
3. Board Type : AR2240
4. MPU Slot Quantity : 1
5. LPU Slot Quantity : 8
MPU 11(Master) : uptime is 0 week, 1 day, 5 hours, 10 minutes
SDRAM Memory Size : 2048 M bytes
Flash Memory Size : 16 M bytes
NVRAM Memory Size : 512 K bytes
SD Card1 Memory Size : 1882 M bytes
MPU version information :
1. PCB Version : AR01SRU3A VER.B
2. MAB Version : 0
3. Board Type : SRU40
4. CPLD0 Version : 104
5. CPLD1 Version : 104
6. BootROM Version : 604
LPU 1 : uptime is 0 week, 1 day, 5 hours, 7 minutes
SDRAM Memory Size : 96 K bytes
Flash Memory Size : 384 K bytes
LPU version information :
1. PCB Version : AR01SEG1CA VER.B
2. MAB Version : 0
3. Board Type : 2FE
4. BootROM Version : cb
LPU 5 : uptime is 0 week, 1 day, 5 hours, 6 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 16 M bytes
LPU version information :
1. PCB Version : AR01WMF9TTA VER.B
2. MAB Version : 0
3. Board Type : 8FE1GE
4. BootROM Version : 213
5. BootLoad Version : 510
FAN version information :
1. PCB Version : AR01DF05A VER.A
2. Board Type : FAN
3. Software Version : 103
查看设备1号槽位所在单板的版本信息
<Huawei> display version slot 1
LPU 1 : uptime is 0 week, 1 day, 5 hours, 15 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 16 M bytes
LPU version information :
1. PCB Version : AR01WMF9TTA VER.B
2. MAB Version : 0
3. Board Type : 8FE1GE
4. BootROM Version : 213
5. BootLoad Version : 510
查看设备风扇模块的版本信息
<Huawei> display version slot fan
FAN version information :
1. PCB Version : AR01DF05A VER.A
2. Board Type : FAN
3. Software Version : 103
项目 | 描述 |
---|---|
Huawei Versatile Routing Platform Software | 表示华为公司通用路由平台VRP |
VRP ® software, Version | VRP版本及发布版本 |
Copyright © 2011-2012 HUAWEI TECH CO., LTD | 表示版本时间 |
uptime | 系统上电时间 |
BKP 0 version information: | 表示背板的版本信息 |
PCB Version : | 表示PCB板的版本信息 |
If Supporting PoE : | 表示是否支持PoE功能 |
Board Type : | 表示单板类型 |
MPU Slot Quantity : | 表示主控板的槽位数 |
LPU Slot Quantity : | 表示接口板的槽位数 |
MPU X(Master) : | 表示主控板槽位号 |
SDRAM Memory Size : | 表示SDRAM空间大小通过命令display memory-usage查看到的“System Total Memory”是从该内存中分配的一部分,不同设备取值不同。 |
Flash Memory Size : | 表示Flash空间大小 |
NVRAM Memory Size : | 表示NVRAM空间大小 |
SD Card1 Memory Size : | 表示sd1卡空间大小 |
USB Disk0 Memory Size: | 表示usb0空间大小 |
MPU version information : | 表示主控板的版本信息 |
LPU X : | 表示槽位号为X的接口板 |
LPU version information : | 表示接口板的版本信息 |
FAN version information : | 表示风扇模块的版本信息 |
19、display dyinggasp capacity
查看Dyinggasp电容板的电池容量是否充满
命令格式
display dyinggasp capacity [ slot slot-id ]
使用示例
查看设备Dyinggasp电容板的电池容量是否充满
<Huawei> display dyinggasp capacity
DyingGasp board capacity information:
Slot Type Capacity
-------------------------------------
1 AR-DGP-S Full
-------------------------------------