DRC的报错类型及其对应的规则

DRC的报错类型及其对应的规则位置

报错类型	对应的规则	规则路径1
Clearance Constraint	间距规则	Electrical–>Clearance–>Clearance
Short-Circuit Constraint	短路规则	Electrical–>Short-Circuit–>ShortCircuit
Un_Routed Net Constrain	未连接	连接未连接的网路即可
Modified Polygon	铜皮问题	再次铺铜即可
Width Constraint	线宽规则	Routing–>Width–>Width
Power Plane Connect Rule	铜皮连接规则	Plane–>Polygon Connect Style–>PolygonConnect
Hole Size Constrain	过孔大小	Manufacturing–>Hole Size–>HoleSize
Hole to Hole Clearance	孔间距离	Manufacturing–> Hole to Hole Clearance–> HoletoHoleClearance
Minimum Solder Mask Sliver	最小阻焊桥间距	Manufacturing–>Minimum Solder Mask Sliver–>MinimumSolderMaskSliver
Silk To Solder Mask	丝印到阻焊的距离	Manufacturing–> Silk To Solder Mask–> SilkToSolderMask
Silk to Silk	丝印间距离	Manufacturing–>Silk to Silk–> SilktoSilk
Net Antennae	天线（线头）	Manufacturing–>Net Antennae–>NetAntennae
Height Constraint	高度规则	Placement–>Height–>Height

---

1. 表中路径均在设置DRC的规则界面中（快捷键DR） ↩︎