Android进阶之路系列:http://blog.csdn.net/column/details/16488.html
我们在android开发过程中可能会遇到一种情况,一个组件需要保持固定的宽高比,但是组件本身大小却不定。尤其在android屏幕碎片化的情况下,很多时候我们需要让一个组件宽度与屏幕宽度一致,这样就无法确定宽度。那么如何让控件保持固定宽高比?有几种方法供大家选择。
1、自定义view
自定义view,重写onMeasure或onLayout等相关方法,通过预定的比例计算宽高。下面是简单示意:
@Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { int width = MeasureSpec.getSize(widthMeasureSpec); if (mRatio != 0) { float height = width / mRatio; heightMeasureSpec = MeasureSpec.makeMeasureSpec((int) height, MeasureSpec.EXACTLY); } super.onMeasure(widthMeasureSpec, heightMeasureSpec); }这种方法不方便的地方是需要自己重新写一个类。
2、ImageView的adjustViewBounds
为ImageView设置adjustViewBounds,如下:android:adjustViewBounds="true"
这个方法只能用于ImageView
3、百分比布局
Android提供了Android-percent-support这个库,支持百分比布局,包括PercentRelativeLayout和PercentFrameLayout。使用PercentFrameLayout也可以实现一个组件的固定比例显示,代码如下:
<android.support.percent.PercentFrameLayout android:layout_width="match_parent" android:layout_height="wrap_content"> <ImageView android:layout_width="0dp" android:layout_height="0dp" android:scaleType="fitXY" app:layout_widthPercent="100%" app:layout_aspectRatio="@fraction/circle_article_aspectRatio" /> </android.support.percent.PercentFrameLayout>需要在res/values下新建一个fraction.xml,代码如下:
<?xml version="1.0" encoding="utf-8"?> <resources> <item name="circle_article_aspectRatio" type="fraction">133%</item> </resources>这样就实现了宽高4:3的比例。
这个方法的好处是不必新建类,但是组件外层需要包裹一个百分比布局。
4、ConstraintLayout的DimensionRatio
与百分比布局类似。代码如下:
<android.support.constraint.ConstraintLayout android:layout_width="match_parent" android:layout_height="wrap_content"> <ImageView android:layout_width="0dp" android:layout_height="0dp" android:src="@mipmap/bb" app:layout_constraintLeft_toLeftOf="parent" app:layout_constraintRight_toRightOf="parent" app:layout_constraintDimensionRatio="4:3" /> </android.support.constraint.ConstraintLayout>可能产生的几个情况如下:
1、如果组件宽高都设置0dp,组件宽高按比例,且只受父view的约束。如图
2、如果其中一个设置成了wrap_content或match_parent,比如说宽度,那么宽度就会是图片的真实宽度和父view的限制宽度的较小值,而高度会根据宽度和比例计算出来。
这时如果图片较小,就不会撑满父View。如图
3、如果宽高都设置成了wrap_content或match_parent,则比例失效。如图:
注意:
1、当宽高都设置为0dp时,app:layout_constraintLeft_toLeftOf="parent"和app:layout_constraintRight_toRightOf="parent"不能省略,否则组件大小为0。
2、当宽高其中一个或都设置为wrap_content时,如果去掉app:layout_constraintLeft_toLeftOf="parent"和app:layout_constraintRight_toRightOf="parent"则比例失效。
Android进阶之路系列:http://blog.csdn.net/column/details/16488.html