1、链路聚合(10分)：SW1和SW2之间使用链路聚合互连，要求2条活跃，1条备用。
使用dis trunkmembership eth-trunk 1 验证结果。
2、MSTP(10分)：正常情况下各VLAN流量路径要求如下：
VLAN10:SW3->SW1->R1；VLAN20:SW3->SW1->R1；VLAN30:SW4->SW2->R1；VLAN40:SW4->SW2->R1。
使用dis stp brief 验证结果。
3、VRRP(10分)：正常情况下要求VLAN10、VLAN20的Master为SW1；VLAN30、VLAN40的Master为SW2。
使用dis vrrp 验证结果。
4、DHCP(10分)：R5为DHCP服务器，R6为DHCP中继代理，要求R5和R6之间使用静态路由为PC5、PC6提供动态分配IP服务。
在PC5、PC6使用ipconfig 验证结果。
5、路由重分发（10分）：R5和R6同在AS 200中，R5为OSPF的ASBR，而R6为外部路由，要求使用路由重分发使得AS 200全网段互通。
在R5使用dis cu ，在R3 使用dis ip routing-table 验证结果。
6、BGP互通（10分）：通过BGP实现1.1.1.1可以访问5.5.5.5
在R1 使用dis bgp routing-table 和 ping -a 1.1.1.1 5.5.5.5 验证结果。
7、BGP路径属性选路（10分）：通过BGP路径属性实现数据传输路径为 R1->R2->R4->R5->R6->R5->R3->R2->R1
在R2和R5 使用dis bgp routing-table 验证结果。
8、NAT(20分)：使用EasyIp进行转换使得Client1能够使用R1的g0/0/2接口的IP访问外网（10分）； 使用NAT-Server使得Client1访问Server1的web服务时能够使用R6的g0/0/1接口的IP和8080端口进行访问（10分）
在R1 使用display nat session all ，客户端访问http://56.0.0.6:8080 验证结果。
9、所有终端能够网络互通(10分)
要求PC2能够ping 通PC3和PC4；PC4能够ping 通PC5和Server1
使用ping 验证结果。
附加题(10分)：在R1使用BGP手动路由聚合，对192.168.1.0/24、192.168.2.0/24、192.168.3.0/24、192.168.4.0/24 进行地址汇总，实现其它路由器只接收到R1的聚合路由，而没有明细路由，从而防止其中某条明细路由出现丢失或震荡的情况，网络中的其它路由器也会删除或震荡。
使用dis bgp routing-table 验证结果。
R1:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R1
[R1]us
[R1]user-int
[R1]user-interface co
[R1]user-interface console 0
[R1-ui-console0]id
[R1-ui-console0]idle-timeout 0 0
[R1-ui-console0]q
[R1]int
[R1]interface
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip add 10.0.0.1 24
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 11.0.0.1 24
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]ip add 12.0.0.1 24
[R1-GigabitEthernet0/0/2]int loop 0
[R1-LoopBack0]ip add 1.1.1.1 32
[R1]rip 1 #######RIP动态路由
[R1-rip-1]version 2
[R1-rip-1]undo summary
[R1-rip-1]network 10.0.0.0
[R1-rip-1]network 11.0.0.0
[R1-rip-1]network 12.0.0.0
[R1-rip-1]network 1.0.0.0
[R1-rip-1]q
[R1]bgp 100 ########BGP
[R1-bgp]peer 2.2.2.2 as-number 100
[R1-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[R1-bgp]peer 2.2.2.2 next-hop-local
R1-bgp]network 2.2.2.2 32
[R1-bgp]peer 7.7.7.7 as-number 100
[R1-bgp]peer 7.7.7.7 connect-interface LoopBack 0
[R1-bgp]peer 7.7.7.7 next-hop-local
[R1-bgp]peer 8.8.8.8 as-number 100
[R1-bgp]peer 8.8.8.8 connect-interface LoopBack 0
[R1-bgp]peer 8.8.8.8 next-hop-local
[R1-bgp]network 8.8.8.8 32 ###### 宣告网段
[R1-bgp]network 7.7.7.7 32
[R1-bgp]network 1.1.1.1 32
[R1-bgp]network 3.3.3.3 32
[R1-bgp]network 192.168.1.0 24
[R1-bgp]network 192.168.2.0 24
[R1-bgp]network 192.168.3.0 24
[R1-bgp]network 192.168.4.0 24
[R1-bgp]network 192.168.5.0 24
[R1-bgp]network 192.168.6.0 24
[R1]acl 3000 ###使用EasyIp进行转换使得Client1能够使用R1的g0/0/2接口的IP访问外网
[R1-acl-adv-3000]rule permit ip source 192.168.1.0 0.0.0.255
[R1-acl-adv-3000]int g0/0/2
[R1-GigabitEthernet0/0/2]nat outbound 3000
R2:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R2
[R2]us
[R2]user-int
[R2]user-interface co
[R2]user-interface console 0
[R2-ui-console0]id
[R2-ui-console0]idle-timeout 0 0
[R2-ui-console0]q
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]int g0/0/1
R2-GigabitEthernet0/0/1]ip add 23.0.0.2 24
[R2-GigabitEthernet0/0/1]int g0/0/2
[R2-GigabitEthernet0/0/2]ip add 24.0.0.2 24
[R2-GigabitEthernet0/0/2]int loop 0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2-LoopBack0]q
[R2]rip 1 ###动态路由
[R2-rip-1]version 2
[R2-rip-1]undo summary
[R2-rip-1]network 12.0.0.0
[R2-rip-1]network 2.0.0.0
[R2-rip-1]q
[R2]ip route-static 35.0.0.0 24 23.0.0.3 #####静态路由
[R2]ip route-static 3.3.3.3 32 23.0.0.3
[R2]ip route-static 4.4.4.4 32 24.0.0.4
[R2]ip route-static 45.0.0.0 24 24.0.0.4
[R2]bgp 100 ####BGP
[R2-bgp]peer 1.1.1.1 as-number 100
[R2-bgp]peer 1.1.1.1 connect-interface LoopBack 0
[R2-bgp]peer 1.1.1.1 next-hop-local
[R2-bgp]peer 3.3.3.3 as-number 200
[R2-bgp]peer 3.3.3.3 connect-interface LoopBack 0
R2-bgp]peer 3.3.3.3 ebgp-max-hop 2
[R2-bgp]peer 4.4.4.4 as-number 200
[R2-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[R2-bgp]peer 4.4.4.4 ebgp-max-hop 2
R2-bgp]network 1.1.1.1 32
[R2-bgp]network 2.2.2.2 32
[R2-bgp]network 3.3.3.3 32
[R2-bgp]network 4.4.4.4 32
[R2-bgp]network 192.168.6.0
[R2-bgp]network 192.168.5.0
[R2-bgp]network 192.168.5.0 24
[R2-bgp]network 192.168.6.0 24
R2-bgp]network 35.0.0.0 24
R2-bgp]network 11.0.0.0 24
[R2-bgp]network 10.0.0.0 24
[R2-bgp]network 12.0.0.0 24
[R2-bgp]network 23.0.0.0 24
[R2-bgp]peer 7.7.7.7 as-number 100
[R2-bgp]peer 7.7.7.7 connect-interface LoopBack 0
[R2-bgp]peer 7.7.7.7 next-hop-local
[R2-bgp]peer 8.8.8.8 as-number 100
[R2-bgp]peer 8.8.8.8 connect-interface LoopBack 0
[R2-bgp]peer 8.8.8.8 next-hop-local
[R2-bgp]network 8.8.8.8 32
[R2-bgp]network 7.7.7.7 32
[R2-bgp]network 23.0.0.3 24
R2-bgp]network 35.0.0.0 24
R3:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R3
[R3]us
[R3]user-int
[R3]user-interface co
[R3]user-interface console 0
[R3-ui-console0]id
[R3-ui-console0]idle-timeout 0 0
[R3-ui-console0]q
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 23.0.0.3 24
[R3-GigabitEthernet0/0/1]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 35.0.0.3 24
[R3-GigabitEthernet0/0/0]int loop 0
[R3-LoopBack0]ip add 3.3.3.3 32
[R3]ip route-static 12.0.0.0 24 23.0.0.2 ###静态路由
[R3]ip route-static 2.2.2.2 32 23.0.0.2
[R3]ospf 1 ###OSPF
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 35.0.0.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[R3-ospf-1-area-0.0.0.0]bgp 200 ###BGP
[R3-bgp]peer 2.2.2.2 as-number 100
[R3-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[R3-bgp]peer 2.2.2.2 ebgp-max-hop 2
[R3-bgp]peer 4.4.4.4 as-number 200
[R3-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[R3-bgp]peer 4.4.4.4 next-hop-local
[R3-bgp]peer 5.5.5.5 as-number 200
[R3-bgp]peer 5.5.5.5 connect-interface LoopBack 0
[R3-bgp]peer 5.5.5.5 next-hop-local
[R3-bgp]peer 6.6.6.6 as-number 200
[R3-bgp]peer 6.6.6.6 connect-interface LoopBack 0
[R3-bgp]peer 6.6.6.6 next-hop-local
[R3-bgp]network 2.2.2.2 32
[R3-bgp]network 3.3.3.3 32
[R3-bgp]network 4.4.4.4 32
[R3-bgp]network 5.5.5.5 32
[R3-bgp]network 6.6.6.6 32
[R3-bgp]network 192.168.6.0 24
[R3-bgp]network 192.168.5.0 24
[R3-bgp]network 35.0.0.0 24
[R3-bgp]network 10.0.0.0 24
[R3-bgp]network 11.0.0.0 24
[R3-bgp]network 12.0.0.0 24
[R3-bgp]network 56.0.0.0 24
[R3-bgp]network 23.0.0.3 24
[R3-bgp]network 23.0.0.0 24
[R3-bgp]network 2.2.2.2 32
[R3-bgp]network 23.0.0.0 24
[R3]route-policy lop permit node 10 ####BGP选路
[R3-route-policy]apply local-preference 222
[R3-route-policy]q
[R3]bgp 200
[R3-bgp]peer 5.5.5.5 route-policy lop export
[R3]q
<R3>refresh bgp all export
<R3>sys
[R3]route-policy as permit node 10 ####BGP选路
[R3-route-policy]app as-path 123 123 additive
[R3-route-policy]q
[R3]bgp 200
[R3-bgp]peer 2.2.2.2 route-policy as export
[R3-bgp]q
[R3]q
<R3>fe
<R3>re
<R3>reboot
<R3>refresh bgp all ex
<R3>refresh bgp all export
R4:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R4
[R4]us
[R4]user-int
[R4]user-interface co
[R4]user-interface console 0
[R4-ui-console0]id
[R4-ui-console0]idle-timeout 0 0
[R4-ui-console0]q
[R4]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 24.0.0.4 24
[R4-GigabitEthernet0/0/2]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.0.0.4 24
[R4-GigabitEthernet0/0/0]int loop 0
[R4-LoopBack0]ip add 4.4.4.4 32
[R4-LoopBack0]q
[R4]ip route-static 12.0.0.0 24 24.0.0.2 ###静态路由
[R4]ip route-static 2.2.2.2 32 24.0.0.2
[R4]ospf 1
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 45.0.0.0 0.0.0.255
[R4-ospf-1]q
[R4]bgp 200
[R4-bgp]peer 2.2.2.2 as-number 100
[R4-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[R4-bgp]peer 2.2.2.2 ebgp-max-hop 2
[R4-bgp]peer 3.3.3.3 as-number 200
[R4-bgp]peer 3.3.3.3 connect-interface LoopBack 0
[R4-bgp]peer 3.3.3.3 next-hop-local
[R4-bgp]peer 5.5.5.5 as-number 200
[R4-bgp]peer 5.5.5.5 connect-interface LoopBack 0
[R4-bgp]peer 5.5.5.5 next-hop-local
[R4-bgp]peer 6.6.6.6 as-number 200
[R4-bgp]peer 6.6.6.6 connect-interface LoopBack 0
[R4-bgp]peer 6.6.6.6 next-hop-local
[R4-bgp]network 2.2.2.2 32
[R4-bgp]network 3.3.3.3 32
[R4-bgp]network 4.4.4.4 32
[R4-bgp]network 5.5.5.5 32
[R4-bgp]network 192.168.6.6 24
[R4-bgp]network 6.6.6.6 32
R4-bgp]network 192.168.5.0 24
[R4-bgp]network 192.168.6.6 2
[R4-bgp]network 192.168.6.0 24
R5:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R5
[R5]us
[R5]user-int
[R5]user-interface co
[R5]user-interface console 0
[R5-ui-console0]id
[R5-ui-console0]idle-timeout 0 0
[R5-ui-console0]q
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 35.0.0.5 24
[R5-GigabitEthernet0/0/0]int g0/0/2
[R5-GigabitEthernet0/0/2]ip add 45.0.0.5 24
[R5-GigabitEthernet0/0/2]int g0/0/1
[R5-GigabitEthernet0/0/1]ip add 56.0.0.5 24
[R5-GigabitEthernet0/0/1]int loop 0
[R5-LoopBack0]ip add 5.5.5.5 32
[R5-LoopBack0]q
[R5]ip route-static 192.168.5.0 24 56.0.0.6 ###静态路由
[R5]ip route-static 6.6.6.6 32 56.0.0.6
[R5]ip route-static 192.168.6.0 24 56.0.0.6
[R5]dhcp enable ###DHCP
[R5]ip pool 1
[R5-ip-pool-1]gateway-list 192.168.6.6
[R5-ip-pool-1]network 192.168.6.0 mask 24
[R5-ip-pool-1]dns-list 8.8.8.8
[R5-ip-pool-1]lease day 7
[R5-ip-pool-1]int g0/0/1
[R5-GigabitEthernet0/0/1]dhcp select global
[R5-GigabitEthernet0/0/1]q
[R5]ospf 1
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 35.0.0.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 45.0.0.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.0
[R5-ospf-1]q
[R5]bgp 200
[R5-bgp]peer 3.3.3.3 as-number 200
[R5-bgp]peer 3.3.3.3 connect-interface LoopBack 0
[R5-bgp]peer 3.3.3.3 next-hop-local
[R5-bgp]peer 4.4.4.4 as-number 200
[R5-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[R5-bgp]peer 4.4.4.4 next-hop-local
[R5-bgp]peer 6.6.6.6 as-number 200
[R5-bgp]peer 6.6.6.6 connect-interface LoopBack 0
[R5-bgp]peer 6.6.6.6 next-hop-local
[R5-bgp]network 3.3.3.3 32
[R5-bgp]network 4.4.4.4 32
[R5-bgp]network 5.5.5.5 32
[R5-bgp]network 6.6.6.6 32
[R5-bgp]q
[R5]ospf 1
[R5-ospf-1]import-route direct #####OSPF重发直连路由
[R5-ospf-1]import-route static ######OSPF重发静态路由
R6:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R6
[R6]us
[R6]user-int
[R6]user-interface co
[R6]user-interface console 0
[R6-ui-console0]id
[R6-ui-console0]idle-timeout 0 0
[R6-ui-console0]q
[R6]int g0/0/1
[R6-GigabitEthernet0/0/1]ip add 56.0.0.6 24
[R6-GigabitEthernet0/0/1]int g0/0/2
[R6-GigabitEthernet0/0/2]ip add 192.168.5.6 24
[R6-GigabitEthernet0/0/2]int loop 0
[R6-LoopBack0]ip add 6.6.6.6 32
[R6-LoopBack0]int g0/0/0
[R6-GigabitEthernet0/0/0]ip add 192.168.6.6 24
[R6-GigabitEthernet0/0/0]q
[R6]ip route-static 0.0.0.0 0.0.0.0 56.0.0.5 #####默认路由
[R6]dhcp en
[R6]dhcp enable ####DHCP中继
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]dhcp select relay
[R6-GigabitEthernet0/0/0]dhcp relay server-ip 56.0.0.5
[R6-GigabitEthernet0/0/0]q
[R6]bgp 200
[R6-bgp]peer 3.3.3.3 as-number 200
[R6-bgp]peer 3.3.3.3 connect-interface LoopBack 0
[R6-bgp]peer 3.3.3.3 next-hop-local
[R6-bgp]peer 4.4.4.4 as-number 200
[R6-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[R6-bgp]peer 4.4.4.4 next-hop-local
[R6-bgp]peer 5.5.5.5 as-number 200
[R6-bgp]peer 5.5.5.5 connect-interface LoopBack 0
[R6-bgp]peer 5.5.5.5 next-hop-local
[R6-bgp]network 6.6.6.6 32
[R6-bgp]q
[R6-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 8080 i
nside 192.168.5.1 www ###使用NAT-Server使得Client1访问Server1的web服务时能够使用R6的g0/0/1接口的IP和8080端口进行访问
sw1：
[sw1-LoopBack0]rip 1 #######动态路由
[sw1-rip-1]version 2
[sw1-rip-1]undo summary
[sw1-rip-1]network 7.0.0.0
[sw1-rip-1]network 192.168.1.0
[sw1-rip-1]network 192.168.2.0
[sw1-rip-1]network 10.0.0.0
[sw1-rip-1]q
[sw1]bgp 100 ######BGP
[sw1-bgp]peer 1.1.1.1 as-number 100
[sw1-bgp]peer 1.1.1.1 connect-interface LoopBack 0
[sw1-bgp]peer 1.1.1.1 next-hop-local
[sw1-bgp]network 1.1.1.1 32
[sw1-bgp]peer 2.2.2.2 as-number 100
[sw1-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[sw1-bgp]peer 2.2.2.2 next-hop-local
[sw1-bgp]network 2.2.2.2 32
[sw1-bgp]peer 8.8.8.8 as-number 100
[sw1-bgp]peer 8.8.8.8 connect-interface LoopBack 0
[sw1-bgp]peer 8.8.8.8 next-hop-local
[sw1-bgp]network 8.8.8.8 32
[sw1-bgp]network 1.1.1.1 32
[sw1-bgp]network 7.7.7.7 32
[sw1-bgp]network 2.2.2.2 32
[sw1-bgp]network 192.168.5.0 24
[sw1-bgp]network 192.168.6.0.24
[sw1-bgp]network 3.3.3.3 32
[sw1-bgp]network 4.4.4.4 32
[sw1-bgp]network 23.0.0.3 24
sw2:
[sw2]int loop 0
[sw2-LoopBack0]ip add 8.8.8.8 32
[sw2-LoopBack0]rip 1
[sw2-rip-1]version 2
[sw2-rip-1]undo summary
[sw2-rip-1]network 192.168.3.0
[sw2-rip-1]network 192.168.4.0
[sw2-rip-1]network 8.0.0.0
[sw2-rip-1]network 11.0.0.0
[sw2-rip-1]q
[sw2]bgp 100
[sw2-bgp]peer 7.7.7.7 as-number 100
[sw2-bgp]peer 7.7.7.7 connect-interface LoopBack 0
[sw2-bgp]peer 7.7.7.7 next-hop-local ########此处不要下一跳是我，否则宣告不了网段
[sw2-bgp]undo peer 7.7.7.7 next-hop-local
[sw2-bgp]network 7.7.7.7 32
[sw2-bgp]peer 1.1.1.1 as-number 100
[sw2-bgp]peer 1.1.1.1 connect-interface LoopBack 0
[sw2-bgp]peer 2.2.2.2 as-number 100
[sw2-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[sw2-bgp]network 1.1.1.1 32
[sw2-bgp]network 2.2.2.2 32
[sw2-bgp]network 8.8.8.8 32
[sw2-bgp]network 7.7.7.7 32
[sw2-bgp]peer 2.2.2.2 next-hop-local
[sw2-bgp]network 192.168.6.0 24
[sw2-bgp]network 192.168.6.0 24
[sw2-bgp]network 192.168.5.0 24
[sw2-bgp]network 3.3.3.3 32
[sw2-bgp]network 4.4.4.4 32
[sw2-bgp]network 23.0.0.3 24
sw3:
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname sw3
[sw3]us
[sw3]user
[sw3]user-int
[sw3]user-interface co
[sw3]user-interface console 0
[sw3-ui-console0]id
[sw3-ui-console0]idle-timeout 0 0
[sw3-ui-console0]q
[sw3]int e0/0/1
[sw3-Ethernet0/0/1]q
[sw3]vlan bat 10 20 100
[sw3]int e0/0/1
[sw3-Ethernet0/0/1]port link-type access
[sw3-Ethernet0/0/1]port default vlan 10
[sw3-Ethernet0/0/1]int e0/0/2
[sw3-Ethernet0/0/2]port link-type access
[sw3-Ethernet0/0/2]port default vlan 20
[sw3-Ethernet0/0/2]int g0/0/2
[sw3-GigabitEthernet0/0/2]port link-type trunk
[sw3-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[sw3-GigabitEthernet0/0/2]int g0/0/1
[sw3-GigabitEthernet0/0/1]port link-type trunk
[sw3-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw3-GigabitEthernet0/0/1]q
[sw3]stp mode mstp ########生成树
[sw3]stp region-configuration
[sw3-mst-region]region-name huawei
[sw3-mst-region]revision-level 1
[sw3-mst-region]instance 1 vlan 10 20
[sw3-mst-region]instance 2 vlan 30 40
[sw3-mst-region]active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
sw4:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname sw4
[sw4]us
[sw4]user-int
[sw4]user-interface co
[sw4]user-interface console 0
[sw4-ui-console0]id
[sw4-ui-console0]idle-timeout 0 0
[sw4-ui-console0]q
[sw4]vlan bat 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw4]int e0/0/1
[sw4-Ethernet0/0/1]port link-type access
[sw4-Ethernet0/0/1]port default vlan 30
[sw4-Ethernet0/0/1]int e0/0/2
[sw4-Ethernet0/0/2]port link-type access
[sw4-Ethernet0/0/2]port default vlan 40
[sw4-Ethernet0/0/2]int g0/0/1
[sw4-GigabitEthernet0/0/1]port link-type trunk
[sw4-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[sw4-GigabitEthernet0/0/1]int g0/0/2
[sw4-GigabitEthernet0/0/2]port link-type trunk
[sw4-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[sw4-GigabitEthernet0/0/2]q
[sw4]stp mode mstp #########生成树
[sw4]stp region-configuration
[sw4-mst-region]region-name huawei
[sw4-mst-region]revision-level 1
[sw4-mst-region]instance 1 vlan 10 20
[sw4-mst-region]instance 2 vlan 30 40
[sw4-mst-region]active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
