CE认证标志是一种安全认证标志，被视为制造商打开并进入欧洲市场的通行证。凡是贴有ce标志的产品就可在欧盟各成员国内销售。无须符合每个成员国要求，就能实现商品在欧盟成员国内的自由流通。在销售产品上强制性打上CE认证标志，是对产品的一种保障行为。
在欧盟市场CE认证属强制性认证，销往欧洲的产品一旦贴附CE 标志，不论有否宣告符合CE认证要求，只要造成损失，业者都必须承担***责任。若被查证未符合CE 认证要求而擅自行销者，处罚从重。
CE认证标志有什么要求
2006/95/EC指令关于CE认证标志的大小和形状的规定： CE认证标志应由法语单词首字母"CE"构成，如果CE认证标志被缩小或扩大时，应严格遵照图中给定的比例。CE认证标志的各组成部分必须有相同的垂直尺寸，并且高度不得小于5毫米。
1：认证咨询—提供产品相关资料
2：认证报价—评估检测费用和时间
3：填写申请表、回签合同和样品快递
4：实验室对样品进行CE检测
5：通过测试后，签发CE报告
6：CE认证报告、***等寄送服务
CE认证要准备哪些材料
1准备2-3个检测样品
2.产品说明书
3.电路图和PCB图
4.申请表（我们提供表格）
5.零部件清单
CE certification mark is a kind of safety certification mark, which is regarded as the pass for manufacturers to open and enter the European market. All products with CE mark can be sold in EU Member States. Free circulation of goods in EU member states can be achieved without meeting the requirements of each member state. It is a kind of safeguard behavior for the products to put CE certification mark on the sale products.
In the EU market, CE certification is compulsory. Once the products exported to Europe are attached with the CE mark, no matter whether they are declared to meet the requirements of CE certification or not, as long as losses are caused, the manufacturer must bear the responsibility. If it is verified that it does not meet the requirements of CE certification and sells without authorization, the punishment will be heavier.
What are the requirements of CE certification mark
2006 / 95 / EC Directive on the size and shape of the CE certification mark: the CE certification mark shall be composed of the French word “CE”. If the CE certification mark is reduced or expanded, the proportion given in the figure shall be strictly followed. The components of CE certification mark must have the same vertical dimension and the height shall not be less than 5mm.
1: Certification consultation - provide product related information
2: Certification quotation — evaluation of testing cost and time
3: Fill in the application form, sign back the contract and express the sample
4: The samples were detected by CE in the laboratory
5: After passing the test, the CE report will be issued
6: CE certification report, * *, etc
What materials should be prepared for CE certification
1 prepare 2-3 test samples
-
Product manual
-
Circuit diagram and PCB diagram
-
Application form (we provide the form)
-
Parts list