演示：已有一个端口号为6379的redis主节点和端口号为1011的从节点1，要在同一台主机安装端口号为2022 的redis从节点2和 sentinel-1、sentinel-3、sentinel-3三个哨兵组成的哨兵节点集合，实现故障自动转移。
平台：red hat linux
版本：redis-4.0.6
整个的主从及哨兵架构配置如下：
节点 ip port
主节点 master 127.0.0.1 6379
从节点1 slave-1 127.0.0.1 1011
从节点2 slave-2 127.0.0.1 2022
sentinel节点1 sentinel-1 127.0.0.1 12123
sentinel节点2 sentinel-2 127.0.0.1 12124
sentinel节点3 sentinel-3 127.0.0.1 12125
一：建立主节点 master
节点 ip port
主节点 master 127.0.0.1 6379
参考 Redis安装卸载
二：建立从节点 slave
节点 ip port
从节点1 slave-1 127.0.0.1 1011
从节点2 slave-2 127.0.0.1 2022
参考 Redis复制， 安装2022端口的从节点2
从节点2参考：修改这个redis2022.conf 文件的部分参数如下：
[root@single-instance redis-4.0.6]# vi redis2022.conf
bind 127.0.0.1
port 2022
daemonize yes
pidfile /var/run/redis_2022.pid
logfile /var/run/redis_2022.log
dbfilename dump_2022.rdb
端口为2022的从节点2设置好后，在6379主节点查看主从信息如下：
127.0.0.1:6379> info replication
# Replication
role:master
connected_slaves:2
slave0:ip=127.0.0.1,port=1011,state=online,offset=1680,lag=0
slave1:ip=127.0.0.1,port=2022,state=online,offset=1680,lag=0
master_replid:2849d350165877266afa5e5ebd3b2815a42ba626
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:1680
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:1680三：建立sentinel节点
建立sentinel节点1的conf文件
[root@single-instance redis-4.0.6]# cp sentinel.conf sentinel12123.conf
[root@single-instance redis-4.0.6]# vi sentinel12123.conf bind 127.0.0.1
port 12123
dir /var/run/sentinel_12123
sentinel monitor mymaster 127.0.0.1 6379 2
sentinel down-after-milliseconds mymaster 30000
sentinel parallel-syncs mymaster 1
sentinel failover-timeout mymaster 180000
/*注释
port 12123 端口是12123
sentinel monitor mymaster 127.0.0.1 6379 2 监控ip为127.0.0.1 端口为6379的主节点服务器，2是判断主节点的sentinel数量
节点之间通过ping来确定
sentinel down-after-milliseconds mymaster 30000 超过设置时间没有ping通redis节点和其他sentinel节点，判定超时
sentinel parallel-syncs mymaster 1 故障转移到新的主节点时，从节点的复制节点数量
sentinel failover-timeout mymaster 180000 故障转移时间
*/
启动sentinel节点1
[root@single-instance redis-4.0.6]# src/redis-sentinel sentinel12123.conf
10947:X 06 Mar 21:23:56.824 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
10947:X 06 Mar 21:23:56.824 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=10947, just started
10947:X 06 Mar 21:23:56.824 # Configuration loaded
10947:X 06 Mar 21:23:56.824 * Increased maximum number of open files to 10032 (it was originally set to 1024).
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 4.0.6 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in sentinel mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 12123
| `-._ `._ / _.-' | PID: 10947
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
10947:X 06 Mar 21:23:56.831 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
10947:X 06 Mar 21:23:56.842 # Sentinel ID is 1a34cd5220ef529f215cc8684a5871814daa45b1
10947:X 06 Mar 21:23:56.842 # +monitor master mymaster 127.0.0.1 6379 quorum 2
登录sentinel节点1客户端查看 sentinel监控的主节点信息，单目前只有一个sentinel=1
[root@single-instance src]# ./redis-cli -h 127.0.0.1 -p 12123 info Sentinel
# Sentinel
sentinel_masters:1
sentinel_tilt:0
sentinel_running_scripts:0
sentinel_scripts_queue_length:0
sentinel_simulate_failure_flags:0
master0:name=mymaster,status=ok,address=127.0.0.1:6379,slaves=2,sentinels=1
同样的设置sentinel节点2和节点3，并启动
再次查看 sentinel监控的主节点信息，有了三个sentinel=3
[root@single-instance src]# ./redis-cli -h 127.0.0.1 -p 12123 info Sentinel
# Sentinel
sentinel_masters:1
sentinel_tilt:0
sentinel_running_scripts:0
sentinel_scripts_queue_length:0
sentinel_simulate_failure_flags:0
master0:name=mymaster,status=ok,address=127.0.0.1:6379,slaves=2,sentinels=3