【caffe】caffe 在已有模型上继续训练模型

一、caffe 支持在别人的模型上继续训练。 下面是给的例子http://

caffe-master0818\examples\imagenet\resume_training.sh

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. ./build/tools/caffe train \  
4.     --solver=models/bvlc_reference_caffenet/solver.prototxt \  
5.     --snapshot=models/bvlc_reference_caffenet/caffenet_train_10000.solverstate.h5  

#!/usr/bin/env sh

./build/tools/caffe train \
    --solver=models/bvlc_reference_caffenet/solver.prototxt \
    --snapshot=models/bvlc_reference_caffenet/caffenet_train_10000.solverstate.h5

二 ，caffe同样支持多次降学习率训练

比如  caffe-master0818\examples\cifar10\train_full.sh

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. TOOLS=./build/tools  
4.   
5. $TOOLS/caffe train \  
6.     --solver=examples/cifar10/cifar10_full_solver.prototxt  
7.   
8. # reduce learning rate by factor of 10  
9. $TOOLS/caffe train \  
10.     --solver=examples/cifar10/cifar10_full_solver_lr1.prototxt \                           // 这里学习率了lr1配置文件   
11.     --snapshot=examples/cifar10/cifar10_full_iter_60000.solverstate.h5  
12.   
13. # reduce learning rate by factor of 10  
14. $TOOLS/caffe train \  
15.     --solver=examples/cifar10/cifar10_full_solver_lr2.prototxt \                           // <span style="font-family: Arial, Helvetica, sans-serif;"> 这里学习率了lr1配置文件</span>  
16.     --snapshot=examples/cifar10/cifar10_full_iter_65000.solverstate.h5  

#!/usr/bin/env sh

TOOLS=./build/tools

$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver.prototxt

# reduce learning rate by factor of 10
$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver_lr1.prototxt \                           // 这里学习率了lr1配置文件 
    --snapshot=examples/cifar10/cifar10_full_iter_60000.solverstate.h5

# reduce learning rate by factor of 10
$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver_lr2.prototxt \                           // <span style="font-family: Arial, Helvetica, sans-serif;"> 这里学习率了lr1配置文件</span>
    --snapshot=examples/cifar10/cifar10_full_iter_65000.solverstate.h5

另一个模型训练

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. TOOLS=./build/tools  
4.   
5. $TOOLS/caffe train \  
6.   --solver=examples/cifar10/cifar10_quick_solver.prototxt  
7.   
8. # reduce learning rate by factor of 10 after 8 epochs  
9. $TOOLS/caffe train \  
10.   --solver=examples/cifar10/cifar10_quick_solver_lr1.prototxt \  
11.   --snapshot=examples/cifar10/cifar10_quick_iter_4000.solverstate.h5  

#!/usr/bin/env sh

TOOLS=./build/tools

$TOOLS/caffe train \
  --solver=examples/cifar10/cifar10_quick_solver.prototxt

# reduce learning rate by factor of 10 after 8 epochs
$TOOLS/caffe train \
  --solver=examples/cifar10/cifar10_quick_solver_lr1.prototxt \
  --snapshot=examples/cifar10/cifar10_quick_iter_4000.solverstate.h5

这样就不用每次都手动降学习率了。 

对于大的模型来说，多次降学习率还是很重要的， 实验结果表明， 当第一次学习率 不再下降的时候，再次降学习率。能够进一步降低损失函数

学习率太跳不到最低点，太小跳不出局部最优点， 所以刚开始学习率要大一些， 防止进入局部最优点。

-------------------------------------------------------------------------------------------------------------------------------------------

三、利用配置文件，配置

当然降学习率也可以通过配置文件配置。

http://caffe.berkeleyvision.org/tutorial/solver.html     caffe 官方例子

To use a learning rate policy like this, you can put the following lines somewhere in your solver prototxt file:

base_lr: 0.01     # begin training at a learning rate of 0.01 = 1e-2

lr_policy: "step" # learning rate policy: drop the learning rate in "steps"
                  # by a factor of gamma every stepsize iterations

gamma: 0.1        # drop the learning rate by a factor of 10
                  # (i.e., multiply it by a factor of gamma = 0.1)

stepsize: 100000  # drop the learning rate every 100K iterations

max_iter: 350000  # train for 350K iterations total

momentum: 0.9

Under the above settings, we’ll always use momentum μ=0.9. We’ll begin training at a base_lr of α=0.01=10−2 for the first 100,000 iterations, then multiply the learning rate by gamma (γ) and train at α′=αγ=(0.01)(0.1)=0.001=10−3 for iterations 100K-200K, then at α′′=10−4 for iterations 200K-300K, and finally train until iteration 350K (since we havemax_iter: 350000) at α′′′=10−5.

Note that the momentum setting μ effectively multiplies the size of your updates by a factor of 11−μ after many iterations of training, so if you increase μ, it may be a good idea to decrease αaccordingly (and vice versa).

For example, with μ=0.9, we have an effective update size multiplier of 11−0.9=10. If we increased the momentum to μ=0.99, we’ve increased our update size multiplier to 100, so we should drop α (base_lr) by a factor of 10.

Note also that the above settings are merely guidelines, and they’re definitely not guaranteed to be optimal (or even work at all!) in every situation. If learning diverges (e.g., you start to see very large or NaN or inf loss values or outputs), try dropping the base_lr (e.g., base_lr: 0.001) and re-training, repeating this until you find a base_lr value that works.

[1] A. Krizhevsky, I. Sutskever, and G. Hinton. ImageNet Classification with Deep Convolutional Neural Networks. Advances in Neural Information Processing Systems, 2012.

参考链接： caffe_note

一、caffe 支持在别人的模型上继续训练。 下面是给的例子http://

caffe-master0818\examples\imagenet\resume_training.sh

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. ./build/tools/caffe train \  
4.     --solver=models/bvlc_reference_caffenet/solver.prototxt \  
5.     --snapshot=models/bvlc_reference_caffenet/caffenet_train_10000.solverstate.h5  

#!/usr/bin/env sh

./build/tools/caffe train \
    --solver=models/bvlc_reference_caffenet/solver.prototxt \
    --snapshot=models/bvlc_reference_caffenet/caffenet_train_10000.solverstate.h5

二 ，caffe同样支持多次降学习率训练

比如  caffe-master0818\examples\cifar10\train_full.sh

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. TOOLS=./build/tools  
4.   
5. $TOOLS/caffe train \  
6.     --solver=examples/cifar10/cifar10_full_solver.prototxt  
7.   
8. # reduce learning rate by factor of 10  
9. $TOOLS/caffe train \  
10.     --solver=examples/cifar10/cifar10_full_solver_lr1.prototxt \                           // 这里学习率了lr1配置文件   
11.     --snapshot=examples/cifar10/cifar10_full_iter_60000.solverstate.h5  
12.   
13. # reduce learning rate by factor of 10  
14. $TOOLS/caffe train \  
15.     --solver=examples/cifar10/cifar10_full_solver_lr2.prototxt \                           // <span style="font-family: Arial, Helvetica, sans-serif;"> 这里学习率了lr1配置文件</span>  
16.     --snapshot=examples/cifar10/cifar10_full_iter_65000.solverstate.h5  

#!/usr/bin/env sh

TOOLS=./build/tools

$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver.prototxt

# reduce learning rate by factor of 10
$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver_lr1.prototxt \                           // 这里学习率了lr1配置文件 
    --snapshot=examples/cifar10/cifar10_full_iter_60000.solverstate.h5

# reduce learning rate by factor of 10
$TOOLS/caffe train \
    --solver=examples/cifar10/cifar10_full_solver_lr2.prototxt \                           // <span style="font-family: Arial, Helvetica, sans-serif;"> 这里学习率了lr1配置文件</span>
    --snapshot=examples/cifar10/cifar10_full_iter_65000.solverstate.h5

另一个模型训练

[cpp] view plain copy

print ?

1. #!/usr/bin/env sh  
2.   
3. TOOLS=./build/tools  
4.   
5. $TOOLS/caffe train \  
6.   --solver=examples/cifar10/cifar10_quick_solver.prototxt  
7.   
8. # reduce learning rate by factor of 10 after 8 epochs  
9. $TOOLS/caffe train \  
10.   --solver=examples/cifar10/cifar10_quick_solver_lr1.prototxt \  
11.   --snapshot=examples/cifar10/cifar10_quick_iter_4000.solverstate.h5  

#!/usr/bin/env sh

TOOLS=./build/tools

$TOOLS/caffe train \
  --solver=examples/cifar10/cifar10_quick_solver.prototxt

# reduce learning rate by factor of 10 after 8 epochs
$TOOLS/caffe train \
  --solver=examples/cifar10/cifar10_quick_solver_lr1.prototxt \
  --snapshot=examples/cifar10/cifar10_quick_iter_4000.solverstate.h5

这样就不用每次都手动降学习率了。 

对于大的模型来说，多次降学习率还是很重要的， 实验结果表明， 当第一次学习率 不再下降的时候，再次降学习率。能够进一步降低损失函数

学习率太跳不到最低点，太小跳不出局部最优点， 所以刚开始学习率要大一些， 防止进入局部最优点。

-------------------------------------------------------------------------------------------------------------------------------------------

三、利用配置文件，配置

当然降学习率也可以通过配置文件配置。

http://caffe.berkeleyvision.org/tutorial/solver.html     caffe 官方例子

To use a learning rate policy like this, you can put the following lines somewhere in your solver prototxt file:

base_lr: 0.01     # begin training at a learning rate of 0.01 = 1e-2

lr_policy: "step" # learning rate policy: drop the learning rate in "steps"
                  # by a factor of gamma every stepsize iterations

gamma: 0.1        # drop the learning rate by a factor of 10
                  # (i.e., multiply it by a factor of gamma = 0.1)

stepsize: 100000  # drop the learning rate every 100K iterations

max_iter: 350000  # train for 350K iterations total

momentum: 0.9

Under the above settings, we’ll always use momentum μ=0.9. We’ll begin training at a base_lr of α=0.01=10−2 for the first 100,000 iterations, then multiply the learning rate by gamma (γ) and train at α′=αγ=(0.01)(0.1)=0.001=10−3 for iterations 100K-200K, then at α′′=10−4 for iterations 200K-300K, and finally train until iteration 350K (since we havemax_iter: 350000) at α′′′=10−5.

Note that the momentum setting μ effectively multiplies the size of your updates by a factor of 11−μ after many iterations of training, so if you increase μ, it may be a good idea to decrease αaccordingly (and vice versa).

For example, with μ=0.9, we have an effective update size multiplier of 11−0.9=10. If we increased the momentum to μ=0.99, we’ve increased our update size multiplier to 100, so we should drop α (base_lr) by a factor of 10.

Note also that the above settings are merely guidelines, and they’re definitely not guaranteed to be optimal (or even work at all!) in every situation. If learning diverges (e.g., you start to see very large or NaN or inf loss values or outputs), try dropping the base_lr (e.g., base_lr: 0.001) and re-training, repeating this until you find a base_lr value that works.

[1] A. Krizhevsky, I. Sutskever, and G. Hinton. ImageNet Classification with Deep Convolutional Neural Networks. Advances in Neural Information Processing Systems, 2012.

参考链接： caffe_note