一、功能需求
vlan-mapping，比如A公司想蹭腾讯的服务，为了成本以及A公司和腾讯的服务都不受影响，有了vlan-mapping，映射对应的vlan，比如将A公司的网络接入B公司，但由于A和B的配置不同，不可能将其改为一样的配置，所以有了此需求，vlan映射，相当于网络映射。
二、 大致流程
三、详细需求
1、支持如下四种配置，单个，多个，连续，混合模式
CLI配置示例：
interface gigabitethernet 1/1
vlan-mapping vlan 100 map-vlan 500 //上行：将vlan 100映射为vlan 500 下行：将vlan 500映射为vlan 100
vlan-mapping vlan 200,300 map-vlan 600,700
vlan-mapping vlan 3-6 map-vlan 13-16
vlan-mapping vlan 3-6,100,200 map-vlan 13-16,500,600
2、交换机接口支持配置80条vlan-maping配置，每条配置支持满配（4096个vlan）2048对vlan映射
3、CLI下发如上示列所示配置，最后以映射关系存在shared_memory中，但show配置时，又要将配置恢复为如上示列所示（所以数据结构用——双链表，这样保证配置删除和恢复可靠性），比如配置是这样的vlan-mapping vlan 3-10 map-vlan 13-20，中途删除了vlan 4和vlan14的映射关系， 最后配置需要显示为， vlan-mapping vlan 3，5-10 map-vlan 13,15-20
4、在报文到来，有vlan-mapping配置时，需要查找映射的vlanid，所以考虑查找速度快用——数组 + bitmap
额外：转发层的表项结构——都是hash桶的结构，求hash值，再对应的槽位，添加节点（节点是从统一的一个单链表pool拿过来的），当删除释放时，又将此节点放回单链表pool
四、数据结构设计
#ifndef _VLAN_MAPPING_H
#define _VLAN_MAPPING_H
#include "./policyroute/policy_routemap_list.h"
/* Vlan-mapping */
#define VLAN_MAP_MAX_NUM (4096)
#define VLAN_MAP_BITMAP (64)
#define VLAN_MAP_MAX_INDEX (2048)
#define VLAN_MAP_CONFIG_MAX (80)
/* node of per config */
struct nsm_vlan_mapping {
u_int16_t cnt; /* count pair */
u_int16_t coming_vlan[VLAN_MAP_MAX_NUM]; /* save all vlan-map, index: coming_vlan, value: mapped_vlan*/
u_int16_t coming_index[VLAN_MAP_MAX_INDEX]; /* for show config, record coming_vlan order. index id 0,1,2...*/
u_int64_t coming_bitmap[VLAN_MAP_BITMAP]; /* use search; bitmap of coming_vlan*/
u_int64_t mapped_bitmap[VLAN_MAP_BITMAP]; /* use search; bitmap of mapped_vlan*/
struct list_head lists;
}; //从访问速度、省内存，还有配置恢复考虑，用双向链表+数组+bitmap实现
/* double-list head */
struct vlan_mapping_head {
u_int8_t length;
struct list_head lists;
};
/* init head */
void init_vlan_mapping_head(struct vlan_mapping_head *h);
/* create node */
struct nsm_vlan_mapping *vlan_mapping_create_node();
/* Delete node */
void vlan_mapping_del_node(struct nsm_vlan_mapping *node);
/* Delete all */
void nsm_unset_vlan_mapping_all(struct vlan_mapping_head *h);
/* insert node */
int vlan_mapping_insert_node(struct vlan_mapping_head *h, u_int16_t cnt, u_int64_t coming_bitmap[], u_int64_t mapped_bitmap[], u_int16_t coming_index[], u_int16_t coming_vlan[]);
/* search node */
void vlan_mapping_search_list(struct vlan_mapping_head *h, u_int16_t coming_v[], u_int16_t mapped_v[], u_int16_t cnt);
/* convert bitmap */
void convert_vlan_mapping2bitmap(u_int16_t vlan_v[], u_int16_t cnt, u_int64_t vlan_bitmap[]);
/* check vlan characters len*/
int check_vlan_mapping_characters_len(char *vlan_coming, char *vlan_mapped);
/* check illegal characters */
int check_illegal_characters(char *vlan_coming, char *vlan_mapped);
/* check vlan id repetiton */
int check_vlan_id_repetition(u_int16_t vlan_coming[], u_int16_t vlan_mapped[], u_int16_t vlan_num);
/* convert coming vlan */
void record_coming_vlan_map(u_int16_t coming_vlan[], u_int16_t vlan_num, u_int16_t coming_v[], u_int16_t mapped_v[]);
/* set configs */
int nsm_set_vlan_mapping_config(struct vlan_mapping_head *h, u_int16_t coming_v[], u_int16_t mapped_v[], u_int16_t vlan_num);
/* end Vlan-mapping */
#endif
五、将配置从结构体恢复为CLI示列所示——代码
void show_vlan_mapping_config(char *vlan_v, uint16_t vlan_id, uint16_t *base, uint16_t *continuous, uint16_t *first)
{
char *p = vlan_v;
/* vlan-mapping vlan %d map-vlan %d */
if ((*continuous) == 1) {
if ((*first) == 1) {
*base = vlan_id;
*first = 0;
*continuous = 0;
sprintf(p, "%d", vlan_id);
} else {
if ((vlan_id - (*base)) == 1) {
*base = vlan_id;
} else {
while (*p != '\0') {
p++;
}
sprintf(p, "-%d", *base);
*base = vlan_id;
*continuous = 0;
while (*p != '\0') {
p++;
}
sprintf(p, ",%d", vlan_id);
}
}
} else {
if ((vlan_id - (*base)) == 1) {
*base = vlan_id;
*continuous = 1;
} else {
*base = vlan_id;
while (*p != '\0') {
p++;
}
sprintf(p, ",%d", vlan_id);
}
}
}
void vlan_mapping_config_write(struct cli *cli, struct vlan_mapping_head *h)
{
struct nsm_vlan_mapping *node;
struct list_head *pos, *n;
u_int16_t i;
list_for_each_safe(pos, n, &h->lists) {
if (!(node = list_entry(pos, struct nsm_vlan_mapping, lists))) {
break;
}
u_int16_t base = 0, continuous = 1, first = 1;
u_int16_t end = 0, continuouss = 1, firsts = 1;
u_int16_t coming_vlan, mapped_vlan;
char coming_v[256] = {0};
char mapped_v[256] = {0};
i = 0;
while (i < node->cnt) {
coming_vlan = node->coming_index[i];
if (VLAN_MAP_BITMAP_EXISTED(node->coming_bitmap, coming_vlan)) {
show_vlan_mapping_config(coming_v, coming_vlan, &base, &continuous, &first);
}
mapped_vlan = node->coming_vlan[coming_vlan];
if (VLAN_MAP_BITMAP_EXISTED(node->mapped_bitmap, mapped_vlan)) {
show_vlan_mapping_config(mapped_v, mapped_vlan, &end, &continuouss, &firsts);
}
i++;
}
if (continuous == 1 && base != 0) {
char *p = coming_v;
while (*p != '\0') {
p++;
}
sprintf(p, "-%d", base);
}
if (continuouss == 1 && end != 0) {
char *p = mapped_v;
while (*p != '\0') {
p++;
}
sprintf(p, "-%d", end);
}
cli_out (cli, " vlan-mapping vlan %s map-vlan %s\n", coming_v, mapped_v);
}
}
六、需要注意bitmap——64位系统一定要用 0X1LL，之前就是被这里坑了
#define VLAN_MAP_BITMAP_WIDTH (64)
#define VLAN_MAP_BITMAP_SET(bitmap, vlan_id) \
do { \
int _word = (vlan_id) / VLAN_MAP_BITMAP_WIDTH; \
bitmap[_word] |= (0x1LL << ((vlan_id) % VLAN_MAP_BITMAP_WIDTH)); \
} while (0)