ensp模拟器单臂路由

ensp模拟器单臂路由
实现目标：交换机下的不同VLAN间主机通信，通过配置单臂路由实现相互通信
拓扑图

pc4设置

pc6设置

LSW2配置

<Huawei>system-view 
[Huawei]vlan batch 111 112
[Huawei]interface GigabitEthernet 0/0/2
[Huawei-GigabitEthernet0/0/2]port link-type access	
[Huawei-GigabitEthernet0/0/2]port default vlan 111
[Huawei-GigabitEthernet0/0/2]quit
[Huawei]interface GigabitEthernet 0/0/3
[Huawei-GigabitEthernet0/0/3]port link-type access 
[Huawei-GigabitEthernet0/0/3]port default vlan 112
[Huawei-GigabitEthernet0/0/3]quit
[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 111 112

AR2路由配置

<Huawei>system-view 
[Huawei]interface GigabitEthernet 0/0/0.1
[Huawei-GigabitEthernet0/0/0.1]ip address 192.168.1.1 24
[Huawei-GigabitEthernet0/0/0.1]dot1q termination vid 111
[Huawei-GigabitEthernet0/0/0.1]arp broadcast enable 
[Huawei-GigabitEthernet0/0/0.1]quit
[Huawei]interface GigabitEthernet 0/0/0.2
[Huawei-GigabitEthernet0/0/0.2]ip address 192.168.2.1 24
[Huawei-GigabitEthernet0/0/0.2]dot1q termination vid 112
[Huawei-GigabitEthernet0/0/0.2]arp broadcast enable

测试
互ping在这里插入图片描述