Linuxの〜ブートマネージャ。
記事のディレクトリ
CentOSの6.xのブートマネージャ。
ランレベルのシステム。
実行レベル | 意味 |
---|---|
0 | シャットダウン |
1 | シングルユーザーモードでは、それは主に、システムの修理のために、Windowsのセキュリティモデルが考えられます。 |
2 | NFSサービスを含む不完全なコマンドラインモード、。 |
3 | 完全なコマンドラインモードでは、文字は標準インタフェースです。 |
4 | システムを禁じます。 |
5 | グラフィックモード。 |
6 | 再起動します。 |
実行レベルのコマンド。
- 実行レベルを表示します。
INIT 0 - >オフ。
INIT 6 - >再起動。
[root@localhost ~]# runlevel
N 3
# 上次 现在。
- 動作レベルを変更します。
[root@localhost ~]# init 级别
- デフォルトの実行レベル。
[root@localhost ~]# cat /etc/inittab
# inittab is only used by upstart for the default runlevel.
#
# ADDING OTHER CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM.
#
# System initialization is started by /etc/init/rcS.conf
#
# Individual runlevels are started by /etc/init/rc.conf
#
# Ctrl-Alt-Delete is handled by /etc/init/control-alt-delete.conf
#
# Terminal gettys are handled by /etc/init/tty.conf and /etc/init/serial.conf,
# with configuration in /etc/sysconfig/init.
#
# For information on how to write upstart event handlers, or how
# upstart works, see init(5), init(8), and initctl(8).
#
# Default runlevel. The runlevels used are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault: