My situation here is gb1 LAN jack corresponds em1, therefore set the / etc / sysconfig / network-scripts / ifcfg-em1 this profile, different machine to the configuration file may be different, there are / etc / sysconfig / network-scripts / ifcfg-eth0, this file I have this linux machine yard no
This is my side of the configuration, set their own dead static ip, BOOTPROTO had intended to set up static, but do not know why the computer is set to none customer service said there
HWADDR=50:9A:4C:9F:55:A0
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.XXX.XXX
PREFIX=24
GATEWAY=192.168.XXX.1
NM_CONTROLLED=no
PEERD=no
DNS1=114.114.114.114
DNS2=8.8.8.8
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=em1
ONBOOT=yes
UUID根据自己的机器来
After setting the Network Service Restart to take effect
