Article Directory
I met and ANSYS
B tournament title this year, the United States is estimated we all know - do sand sculptures. When it comes to doing sand sculptures, it would have to involve the hydrodynamics. I heard Fluent simulation software very good, so the Internet to find a few Fluent6.3 installation package, the results are not installed. Up anger directly to find ANSYS18 installed. Ideal is full, the reality is very cruel. Think first encounter is a painful and meet me and ANSYS18 hard heart. I was tortured for a whole day it (I heard some friends also tortured for two days). So I decided to write this blog, so that more people fully appreciate the beauty of ANSYS.
A, ANSYS introduction
A lot of people are using the very beginning of this fluid simulation software Fluent, Fluent was later acquired by ANSYS. Few can now install Fluent6.3 installation package.
ANSYS put some of their own features and Fluent merged, creating a more powerful software ANSYS. This means that a larger installation package and ANSYS software to take up the memory. Take a look ANSYS18 installation package archive much of it.
Since the installation package so large, that it certainly has its benefits now! I posted the following two flow field simulation analysis diagram I come out with ANSYS CFX.
The flow rate of the liquid surface of the elliptical cylinder analysis:
surface pressure distribution quadrangular pyramid:
ANSYS installation package everywhere, everyone wants to own the Internet, then you can find. Here I recommend a very good micro-channel public number: White repository (which reminds me, "I am white river" inside the white).
Second, the installation process
The detailed installation steps Baidu library has one of the best I've ever seen temporary installation of a tutorial ANSYS18 ( click here Reference: ansys18.0 installation analysis ). You can do it in accordance with this article written above. Here, I just need to add a few local attention.
1, the non-default path installation path
Because ANSYS18 too big, your C drive certainly does not fit, even if fit, your computer is about to reach the point where reinstall the system. Therefore, before installation must be optimistic about the installation path.
If you are using a B method, it would have to download License Management.
SetupLM found in Disk1 inside, double-click download License Management. License Management installation directory and ANSYS Product installation directory may be different. Anyway, I get two folders are stored in them.
In this setupLM:
When installing and mounting steps ANSYS Inc License Management is the same. After installing the License Management, winx64 found in the installation package Crack folder. My path winx64 is this:
the entire winx64 copied to this folder, replacing the original file:
As for why you want to replace two winx64 inside the program, I do not know.
The next step is to generate a license.
2, license generator using
Some Crack Disk1 folders and folders in the same directory, and some on Disk1 inside. Like me, like there are two different names of license generator, but it is at the beginning of the A180. These two folders inside the license generator may not be the same, if you use one of the generated license does not take, then you can try another Crack folder in the license generator try.
In times of small black box, you can first try enter "y" to generate a license. If you do not find the license generated in the same directory and license generator, it would have to reopen the license generator, enter "n" in the black box, and then follow the prompts to enter the host name and the local MAC address (MAC address English remember to use lowercase letters, as to how to find the MAC address, I can not say here, the Internet to find their own method). FIG follows:
License after generation:
3, FlexNet Licensing not running problems after importing
Licensing not running for three main reasons:
(1) documents expired
(2) hostname or MAC address is not on the
(3) port number occupied question
if it is the first (1) case, it would try to regenerate the license or another license generator generates a new license. If it is the (2) case, which would modify the license MAC address or hostname. Because our license is txt text, so we can directly open license, modify things first line (I believe we have passed four English and learned a little code, they are able to read the first line of text license).
Above the first (1) case I did not come across, so if the license is expired, I do not know what will be the prompt . If the first (2) case, the import license will be prompted. And I was being tortured (3) cases, so below I discuss only the first (3) cases.
Open the License Management, where you generate the import license
is no problem if imported, go to the place shown below, Start press the green button of
the license and other finished running, if not running FlexNet Licensing display appears while the other two are show running, and it lets you see the prompt when Debug Log, you can click through View FlexNet View FlexNet Debug Log there. It may appear at the bottom:
means that the port number 1055 is occupied.
Then we can first use the CMD to see the port number has not been occupied. When we enter CMD inside | when "netstat -ano findstr 1055", TCP displayed only if the address 0.0.0.0, description of the license server itself out of the question. And not only 0.0.0.0, then look for related processes in accordance with the showing of PID and deactivated (to find and disable the associated process method than that, the Internet to find their own method) If the display.
But take up the port number for the program process 1055 ports are few, most cases show only TCP address 0.0.0.0. This time you can change to another license generator to generate a new license to try to re-import. If not, off the network operation license. Then you will find a surprise!
Third, the ending
Yes, that is off the network !
Here, I'm so severely Tucao about the major resources in to the site installation tutorial - something so simple, no one actually call this method listed? ! Am I the only one who is like this, or do a little stupid because I do not know how to break off the network software?
At that time I find a lot of tutorials, some say "Rebuild license on it." (Did he let me generate numerous license?);
Some say deleted Files Shared ... ah?
Then restart ?
There is to say that the lack of environmental variables ? (I have ten software installed, how there is no lack of environmental variables tried to say it, do ansys this particular point?)
Off the net this method, I was a 15 -year User response issues occupied the port number found, at just wanted to try, I did not expect to solve! Yes, that is 15 years! You're not wrong! And I actually was the first praise?!
After a 9 turn eighteen, I finally found a straw! At that time the heart almost collapsed! To know the beauty of race day where you can come up with a code that came. As for how the United States and race results, I do not say here, and miserable.
Finally, I would like you to use novice ANSYS18 under Reminder: After establishing project and unfinished mesh, need to click the project in the setup to import mesh divided domain. Then you may be prompted to find the mesh. You do not ignore the prompt, it will still be open setup interface. We just click the interface in Files-> import-> Mesh, and then find the file you're looking for on the line, as to where that file, which requires you to go for a search watched (Because ANSYS save the file will be relatively slow, so after update your Mesh, tens of seconds to wait to find Mesh file exported).
Finally, the last, I hope to see more in the online tutorial on the use of ANSYS draw 3D map, for example to a bottom surface of the oval tapered object?
