GNS3 advanced version display effect
Recommend a network engineering professional mirror and tool download website https://www.mdfk.love
Enter the topic: GNS3 local installation router switch tutorial (free)
The installation process is very simple, why do many people like to make it so complicated and bloated?
First attach the package link:
Link: https://pan.baidu.com/s/1GGtXDaEAQavO3KH0vFZqzw?pwd=lw66
Extraction code: lw66
Just two files, as shown below,
Or you can also install the latest version 2.2.36, and the more advanced image C7200, also two files
(Explain here, C3640 and C7200 are both router images, all GNS3 versions can install these two images, C3640 can also simulate a switch, it is recommended to install both C3640 and C7200)
Double-click the GNS3 installation package GNS3-2.2.26-all-in-on, click Next
Click I Agree to indicate that you agree to these terms
and then click Next
Click Next
again and still Next
will display the installation progress
. There will be such a thing that pops up. This is the network card recognizer. Just click Next. Click
I Agree
and click Install to install.
Click Finish to indicate that the installation is complete.
You can see that GNS3 seems to be downloading something.
The download process is very slow. , don’t worry, just click Cancel to return, a window will pop up asking if you want to continue downloading, click No and the
progress bar will be completed quickly, click Next
to select No, then click Next
and click Finish
and this window will pop up after a while, fork off OK
Generally, you will be asked whether you need to update to the latest version, click No
and then click Settings
to find IOS Routers, there is nothing here, click New and
click Browser to browse, select the C3640-IK.bin just downloaded, the following interface will pop up, click OK
will ask you whether you need to create a folder, click Yes
and then click Next
to still choose Next
or choose Next
to set the interface as mine, click Next
NM-1FE means FastEthernet, that is, Fast Ethernet interface, the rate is 100Mbit/s,
NM-4E means Ethernet, that is, the Ethernet interface, the rate is 10Mbit/s,
NM-4T stands for serial line, which is commonly known as serial line, generally used for WAN connection port, and it is a necessary interface for PPP PAP CHAP authentication
[Key] Click Idle-PC , automatically obtain the Idle value, if not obtained, opening a router may cause the CPU usage to reach 100%, so it must be obtained. The
acquisition is successful, click OK, then click FInish,
click Apply, and then click OK
Note: The interface of the C7200 mirror needs to be set In this way, PA-GE stands for Gigabit Ethernet port, and the rate is 1000Mbit/s
Then enter the settings, click Server, select the network 127.0.0.1, which represents the local host, then click Apply, wait for the window to finish running, and then click OK
Then there will be these red prompts or something, don’t worry
Then install the switch, click Settings, or IOS Routers, select New, or select C3640-IK.BIN image
Click Next
to set it as EtherSwitch, then click Next, Next
and set all interfaces as switching interfaces , click Next
to get the Idle value, wait a while After getting it, click Finish, then click Apply and OK
Then close GNS3, open GNS3 again, and GNS3 is installed.
Create a project test
and create a topology at will. You can see that there is no interface displayed. Click the next one, and the interface will be displayed. The
GNS3 local mode uses a router simulation. Switches, so there will be some small problems, especially for beginners, when simulating a Layer 2 switch, you must first enter "no ip routing" to turn off the routing function
After turning on all the devices, you can see that all the devices are green, and next to it, you can see that the CPU usage is 5.3%, and the memory usage is 57% (different computers have different usage levels, don’t worry about it) is it very simple
?
Finally, add that the projects created in GNS3 will be saved in this path
If you use other users to log in to Windows, replace the Administrator here with another one, but generally the completed projects are under this path.
If you want such a single-window configuration mode, you can pay attention to it. The blogger will release it soon An article details this