Sidley W600 PCB with the minimum system hardware design (with component library)

W600 peripheral hardware design is very simple, to note that:

1. 5,6,7 chip attachment pin respectively and 4.7nf 10uf filter capacitor.
2. 47uf filter capacitor placed near the chip 9,10 feet.
3. Chip 11 feet for an external precision resistor 24K 1%.
4. 1uf chip 24 feet require an external filter capacitor.
5. RF portions can be left where space permits the π-type network, so the post-RF debug. (Especially after the certification requirements will be higher)
6. Crystal frequency is 40MHz, the crystal matching capacitor 15pF generally, since various crystal production process, PCB trace design and other factors, may need to be adjusted to match the actual value of the capacitor case (deviation is preferably in the range of ± 10ppm)

Before the design is strongly recommended to see Xiaguan network "W600 Chip Design Guide"

Minimum system may refer to the figure:

Next is the W600 may be used PCB footprint library file for your reference

Annex [. 1]: W600 library package AD16.zip

Annex [2]: W600 library package PADS9.5.zip