Reference article:
https://post.smzdm.com/p/a25r8mo2/
http://www.myxzy.com/post-488.html
PVE installation tutorial, please refer to: https://www.cnblogs.com/faberbeta/p/proxmox004.html
1. Click on the top right corner of the "Create a virtual machine" button, check the "Advanced" on the hook "boot from the start," fill in the name of the virtual machine name (for example DSM), click "Next"
2, select the operating system "Linux", version select "4.X / 3.X / 2.6 Kernel" to select "not applicable any media", click "Next"
3, the system default can click "Next"
4, hard disk, casual setting, and then will be deleted, click "Next"
5, CPU selected in accordance with the actual situation, there are four cores to fill 4, click "Next"
6, memory size, but also according to the actual situation (generally enough memory 2G), click on "Next"
7, the network model selection "intel E1000", click "Next"
8, confirm the configuration, click "Finish"
9, remove the hard disk, select "DSM" -> "Hardware", hard to find, select and click "separation"
10, after the separation of the hard disk, select disk 0 is not used, click the "Delete"
12. Use WinSCP directly or mac scp, to extract from the root directory to upload synoboot.img
13. img disk conversion, select Shell, enter qm importdisk 101 /synoboot.img local-lvm will see vm-101-disk-0 is being created
101 is a virtual machine number, synoboot.img is just upload boot image
14. Add the disk. DSM to enter the hardware settings, select the unused disk 0, click Edit
15. The bus / SATA device and select 0, disk mirroring select vm-101-disk-0