1. Double-click "Create a new virtual machine"
2. Click "Next"
3. Select "install the operating system later," click "Next"
4. Default click "Next"
5. Set the machine name and then click "Next"
6. Default Click "Next"
7. Give constant memory size, then click "Next"
8. Default Click the "Next"
9. Default click "Next"
10. Default click "Next"
11. Select "Create a new virtual disk" and then click "Next"
12. After a given disk size to select "Split virtual disk into multiple files" and then click "Next"
13. The disk file storage path, the default click "Next"
14. Click "Finish"
15. Mirror Mount Click "CD / DVD (IDE) automatic detection" (here first, do not boot)
16. Select "Use ISO image file" deposit in advance to find a good ISO image file and then click "OK"
17. The virtual machine is turned on
Selecting a first mode 18. Press "Enter" key
19. Select "Skip" (skip) Enter to confirm
20. Default Click "Next"
21. Select the English language after the election Click "Next" to
22. Select Choose the default keyboard layout format Click "Next" to
23. Select "Basic Storage Devices" and click "Next" to
24.选择“yes,discard any data”
25. Setting the host name, click "Next"
26. The selected time zone (compare pit) remove the front system clock user UTC checkmark and then click "Next"
27. After setting the password, click "Next"
28. After selecting "Use Anyway" Click "Next"
29. After selecting "Create Custom Layout" (custom installation) Click the "Next"
30. Partition
/ Boot (size 200M) Click "OK"
Swap swap (size 768M) Click "OK"
/ (Root partition to the remaining number of how many) disk partition in a very critical step, click "OK"
Zoning can see the complete divided into three zones:
/ Boot (boot information storage system)
swap (swap is finished faster when using a temporary storage memory swap)
/ (Root partition how much to rest)
31. Format "Format"
32. Select "Write changes to disk" (overwrite disks)
33. Default "Next"
34. The minimum installation "Minimal" -> "Customize now" (Custom Installation) -> "Next"
35. Select spree
Select spree (where most of the pit) 1 three spree here to do "Next" and there are a "big gifts"
Spree select 2 -> "Next"
Here is the correct 501 add-ons
36. restart the virtual machine "Reboot"
37. Network Configuration -> click "OK"
38. The Executive setup command to configure the third card then choose "enter" key to confirm
39. The first option and then "enter" key to confirm
40. The first option and then "enter" key to confirm
41. The specific configuration of the configuration is complete select "OK"
Do the following after the configuration is complete click "OK", goes back to the beginning of the interface select save save & quit and quit order in the virtual machine
View IP address configuration
