Broad burn burn ~ ~ ~ burn
Sui Suinian the Arduino Raspberry Pi ❤ ❤
❤ My Android / EV3 WinAVR toolchain toolchain ❤
❤ AVR Bootloader ~ Yaki burn ❤ USB / USB port / Wiring ❤ Serial / ISP / ICSP / Hacking
E06-AVR/ATmega8/ATmega8L | ATtiny85 | ATmega88 | ATmega168/ATmega328/328p | ATmega32U4 | ATmega8U2/ATmega16U2@ | USBasp firmware@
树莓派~UNo/51
Yaki burn | connected network network | ISP | Arduino DIY
AVRStudio、ICCAVR、IAR for AVR
◎ - Use avrdude let Atmega16A enable external crystal
https://chou.it/2013/06/use-avrdude-to-make-atmega16a-to-use-external-crystal/
※ Shao Shao burn
1412xx
AVR burn much easier than ARM, AVR, after all, but only head it, how to put on a par blanket ~~~
※ Myduino
◎ Geek Mania - Myduino 2013-11-15 ★★★★★
※ Arduino DIY
◎ GROBO - a long time to update 2014-7-2 (Arduino Mini Pro)
◎ Optimus Prime - Homemade Arduino board 2013-10-2
◎ GROBO - DIY Arduino - starting from the wash circuit board! (1), welding play it! (2), the Bootloader written ATMega chip! (3) 2011-5-14 ★★★★★
※ ISP
◎ Open Programmer v0.9.x
◎ XenoGC Clone
◎ Microcontroller Projects -- USBasp - USB programmer for Atmel AVR controllers 2011-4-30
◎ Yaroslav Osadchyy -- MEGA-ISP Shield Schematics and Board Layout for Arduino 2009-7-14 ★★★★★ #####
◎ Mickey circuit - [AVR] - made USB AVR burner ~ USBasp 2008-3-13
※ PCB
◎ Jia teacher's true husband - PCB DIY experience 2014-12-6
◎ kotations -- How to make PCB using Photoresist Dry Film 2014-5-18
◎ digibirds side -- PCB developement with simple tools 2014-2-15
◎ CNLohr -- How I do my projects - Part 2 - Producing the PCB 2014-1-29
♫ Rohitesh Mishra -- PCB MAKING MADE EASY 2011-11-28
♫ Shackspace - Direct to Copper PCB Etch-Resist Printing 2011-7-17 (Jer direct printing)
♫ Sir Loon -- PCB using toner transfer method and photo laser paper 2008-7-24
◆ Wiki - a printed circuit board flexible printed circuit board epoxy thermosetting polyimide epoxy adhesive
Acronym flexible printed circuit board FPC (Flexible Printed Circuit; FPC) has a light, thin, resistant to bending, resistance to moisture, etc.
※ network connected to the network
◎ Cooper Maa -
● the Arduino as an AVR ISP (In-System Programmer) using (1) 2011-3-1
● the Arduino as an AVR ISP (In-System Programmer) using (2) 2011-3-1
● the Arduino as an AVR ISP (In-System Programmer) using (3) 2011-5-30 ★★★★★
= bootloader upload.using
upload.using = arduinoisp ===> with ArduinoISP to burn Arduino Sketch (USB to Serial)
directly to the Arduino Sketch burn to the board, did not use bootloader, which allows you to use all of the ATmega chip program space (program space).
Among the original 32 KB ATmega328 has 2 KB is using bootloader take it, now you will be able to fully use this space instead of 32 KB is 30 KB, ATmega168 will be 16 KB instead of 14 KB, and is ATmega8 8 KB instead of 7 KB. In addition, when the board the power to restart the original bootloader will boot delay (about 6-8 seconds), avoid this problem together now lost.
● USBasp 2011-7-7
● Integration USBasp with the Arduino IDE 2011-7-7
● Using Arduino programming ATtiny 2012-4-10
● Close the Arduino UNO's auto reset 2013-9-7
$ Echo "Hello"> / dev / ttyACM0
short RESET - 10uF capacitance - GND
Po ㄧ ㄡ ㄊ ㄜ ◎ mi fa '- using Arduino UNO / Duemilnova burn Arduino bootloader 2014-11-17
◎ EDN - Arduino board soldering and debugging 2013-4-8 ★★★★★
◎ leaves difficult - the Arduino Uno as a line ISP programmer, ATtiny85-20PU, ATmega328P-PU 2013-2-1
◎ Flashgamer -- Using your Arduino as an ISP 2012-3-26 ★★★★★
stk500_getsync(): not in sync: resp=0x00 ===> add 120Ω resistor or 10uF Capacitor between the Reset and 5V Pin
◎ Dalewheat -- How to Build Arduino Breadboard 2009-9 (PDF)
◎ leaves hard - Arduino AVR microcontroller and related words 2013-1-21
http://yfrobot.com/forum.php?mod=viewthread&tid=2218&extra=page%3D1
http://letsmakerobots.com/content/make-arduino-isp-programmer
http://codeandlife.com/2012/03/21/using-arduino-uno-as-isp/
https://learn.sparkfun.com/tutorials/installing-an-arduino-bootloader/connecting-the-programmer
http://www.open-electronics.org/arduino-isp-in-system-programming-and-stand-alone-circuits/
http://voidyourwarranty.wordpress.com/2014/08/17/using-arduino-as-an-isp-to-program-a-standalone-atmega-328p-including-fuses/
Power supplies DIY http://cool-yun.blogspot.tw/2014/03/diy.html
~ THE END ~
Original: Large column [small Pi] AVR Bootloader ~ Yaki burn