Cisco command-ten

（Creative Commons）

90. In the standard access-list command traffic filter creates a record in the table:
    Router (config) # access-list access-list-the permit Number {|} Source the deny-address [Source-address]
91. Create a record in the extended traffic filter table with the command-List Access:
    Router (config) # Access-List Access-List-Number {the permit | the deny {Protocol | Protocol-keyword}} {Source Source-wildcard | the any} { destination destination-wildcard | any} [ protocol-specific options] [log]
92. For in-band routing updates, update the routing configuration of the basic command format is: R1 (config-router) # distribute-list access-list-number | name in [type number]
93. For band routing update, the routing update the basic configuration command format is:
    Rl (config-Router) the distribute # List-Access-List-Number | name OUT [INTE *** CE-name] Process-routing | autonomous- system-number
94. set snmp命令选项： set snmp community {read-only|ready-write|read-write-all}[community_string]
95. set snmp trap 命令格式如下：
    set snmp trap {enable|disable} [all|moudle|classis|bridge|repeater| auth|vtp|ippermit|vmps|config|entity|stpx]
    set snmp trap rvcr_addr rcvr_community
96. 启用SNMP chassis 陷阱: Console>(enable) set snmp trap enable chassis
97. Enable all SNMP chassis traps: Console> (enable) set snmp trap enable
98. 禁用SNMP chassis 陷阱: Console>(enable) set snmp trap disable chassis
99. SNMP trap receiving table to add a record: Console> (enable) set snmp trap 192.122.173.42 public
100. show snmp output.
101. Output of the command set snmp rmon enable the.
102. Display SPAN information: Consile> show span