ARM based industrial motherboard chip NXP_LS1012A

　　LS1012A processor core 64 Arm®Cortex®-A53, may be provided over 4,000 CoreMark® performance and hardware for packet processing and security acceleration, and the best overall performance of any typical 1 W power of the communication processor.
　　FM-LS1012A computer motherboard based LS1012A NXP's performance, low power 64-bit ARM processors. FM-LS1012A processor is designed for space-constrained, high performance and low power requirements of network applications IoT optimized, integrated up to the operating frequency of Cortex -A53 Arm 1GHz single core, with the hardware packet forwarding engine and a high-speed interface, 1W typical power consumption can be small package and to provide wire-speed network performance. FM-LS1012A used with the higher-level QorIQ LS series devices the same trusted architecture and software compatibility, support for the use of common software platform 64-bit scalable security applications. QorIQ FM-LS1012A processor enterprise-class performance and security features suitable for non fanless, small-sized networks and networking applications.
　　System and network interfaces
　　FM-LS1012A three-channel processor, 6 GHz the SerDes multi-protocol, to support high-speed interface, including up to two Gigabit Ethernet ports, the DMA control PCIExpress® generation SATA 3.0 2.0 port and a port. FM-LS1012A processor also has dual USB Controller - a support with integrated PHY SuperSpeed USB 3.0, USB 2.0 supports other functions. Other interfaces include QuadSPI and SD / MMC support.
　　FM-LS1012A comprises a hardware packet forwarding engine (the PFE), can uninstall IP packet processing from the main CPU, resulting in higher performance and lower power consumption than a pure software processing can be achieved. Even with the smallest packet, it is possible to carry out the PFE 2 Gbit / s IP forwarding, almost no CPU load.

ARM industrial motherboard based NXP_LS1012A
　　complete startup, rich ecosystem
　　FM-LS1012A evaluation board support provided by the processor, the board has an integrated on-board sensor, further cost savings, and embedded board solution. Evaluation Kit includes a Linux®BSP, where the six-month evaluation license optimized drivers include support peripherals and CodeWarrior development tools. For fast product prototyping, FM-LS1012A board provides a built-in mikroBUS®Click module can be easily extended through the support of hundreds of sensors, actuators, memory and display module powerful click. All LS series devices offer support to ensure a stable supply of products, as well as our extensive third-party ecosystem, which is the largest telecommunications market, the most mature ecosystem. Combined with our expertise and global support infrastructure, the ecosystem can help customers from competing solutions and equipment to accelerate the migration, thereby saving investment costs and shorten time to market.
　　QorIQ FM-LS1012A target application:
　　support trusted gateway things
　　consumer NAS
　　move NAS (battery-powered)
　　Ethernet drive for data center storage
　　entry-level broadband Ethernet gateway
　　building and factory automation
　　Consumer Electronics
　　Personal / consumer NAS
　　intelligent home gateway
　　boards the FM-LS1012A QorIQ®
　　QorIQ® LS1012A the FM-circuit board is a low cost development platform QorIQ FM-LS1012A series network processor-based processor Arm®Cortex®-A53.
　　Features include easy access to the processor I / O, the battery is ready, low power operation, based on the standard dimensions and expansion board and a built debug interface options for flash programming and operational control.
　　FM-LS1012A supported by Feimairuike and third-party development software.
　　FM-LS1012A Linux provides a rich development environment, initially through the offline version released later will enter the cross-platform version. Visit QorIQ SDK to download the latest version.
　　Development Board QorIQ® FM-LS1012A main features:
　　the FM-LS1012ASE7HKA the MCU the CPU-800MHz, 1GT / S DDR3L, the FC-212 the LGA
　　512Mb QuadSPI the NOR flash
　　4Gb DDR3L a DRAM
　　VR5100 power management the IC
　　SGTL5000 audio ADC / DAC, with microphone and headphones 3.5mm jack
　　dual 1000Base-T Ethernet interface with RJ-45 connector
　　USB2.0 / 3.0 OTG Micro A / B connector
　　Arduino Shield extension connector having I2C, SPI, UART and GPIO connected
　　USB2.0 Micro A / B The connector for debugging and supply
　　additional debugging K20 microcontroller through JTAG Cortex 10-pin connector and CMSIS DAP