Testing the newly released Ventura 13.1 and Nvidia Kepler graphics cards, using an old GT640, most Kepler N cards including the GPU GK1xx are fully supported.
Fix to use OpenCore-Legacy-Patcher 0.5.3
https://github.com/dortania/OpenCore-Legacy-Patcher/releases
Fix
1. Close SIP
Actual testing requires entering recovery mode
Terminal run command:
Csrutil disable
Csrutilanthenticated-root disable
2. EFI settings
Opencore's csr-active-config recommends setting 0xFF0F0000
Boot-arg: amfi_get_out_of_my_way=0x1
3. Run the patch. If Start Root Patching can be clicked, the repair work will be completed automatically. You can refer to the tutorial I wrote before.
The Kepler graphics card has Metal acceleration after repair, which means it can run any acceleration program that requires hardware.
Two softwares were tested:
Final Cut Pro 10.6
AdobePremiere Pro 2020
The core display acceleration data has been added, but it has not been successful yet. After referring to the test results of other experts in Dortania on Github, they cannot turn on the core display acceleration function of Intel's sixth generation U at the same time.
https://github.com/dortania/OpenCore-Legacy-Patcher/issues/1008
The specific solution is to be dealt with by the developer.