After completing the schematic drawing, when importing it into Pcb for layout, an error message appears; Unknown Pin: Pin Q1-B.
The reason is:Pin names are inconsistent
In the schematic diagram, the three pins are defined as B, C, and E respectively;
in the common TO-92A package, 1, 2, and 3 are used as the names of the three pins, so they cannot correspond and an error occurs.
Correspondence between packages and pins:
Recommended method:
**
Modify the pins of the schematic diagram and change the pin name of Pin to 1 2 3
**
Result:
The import was successful and no errors were reported during the import process.
