Win10 and other systems to install Pads installation steps
win7 and win10 install PADS
First of all, the installed Pads version is Pads 9.5 version.
The installation steps are as follows
1. Install the PADS software "exe" installation package document, and pay attention to run it with administrator privileges;
2. After running, the following appears, directly select the NEXT menu;
3. After entering the following interface, directly select the Skip menu. (Don't choose Next. After choosing Next, you will need to choose the computer type, etc., and you will not be able to proceed to the installation steps without complete normal operations, and you will not be able to PJ after installation).
4. This is required for all software installations;
5. This is the software you choose to install, such as installing only PADS, or installing DxDesiger and other things;
if the performance of the computer is good and the hard disk space is large, it is recommended to install them all;
6. The path of installation;
Pads project path:
These two paths can be completely modified. It is recommended not to put them under the C drive, but on the D drive or other drives. This does not affect the subsequent PJ activation.
7. After starting, select the following button to start installing the software; according to the performance of the computer, some are very fast, and some are very slow.
8. This interface means OK, click the following option;
9. Copy the PJ file and place it in the installation file directory of your choice, and run it directly with administrator privileges;
10. The generated License file is also saved in the installation directory;
11. Create a new user variable:
Variable name: MGLS_LICENSE_FILE
variable address: D:\MentorGraphics\LICENSE.TXT This address is the address of the folder you created during installation, don’t make a mistake;
12. After saving, it can run normally;
win10 home Chinese version problem solving
1. The win10 version is the home Chinese version. The possible problem is that the software is open and running, there is no problem, but when using Ctrl+middle mouse button to scroll to zoom in and out, the software does not respond at this time, but the win10 system is running normally, and there is no software unresponsive question.
Solution: It is recommended to install a new input method, such as Sogou Input Method , which can solve this problem. The reason for this problem is the compatibility of the input method.
Because the network is disconnected or there is no network, it is recommended to check the following solutions;
1. Find the language setting
2. Choose Simplified Chinese
3. Open the Microsoft Pinyin option
4. Choose Normal
5. Open this option;
February 2021