Detailed steps to install win7 in bootcamp (CD installation)

The detailed steps to install win7 in bootcamp first require you to confirm the following (1) your Mac system is a drive letter, that is, "macintosh hd" a disk. If not, the first thing you need to do is to back up the data under your partition, so that the disk becomes a single disk.                The steps are: Utilities - Disk Utility - select the option of the total capacity (for example: 500.11GBST....) - click "Partition" - click the part of the area you divided before - and then click the "-" in the lower left corner number - click "Remove" - ​​wait for the disk to become a single disk, then close the disk utility interface. (2) To use Boot Camp with Windows 7, the following conditions are required. For Mac OS X v10.7 Lion systems:         ▪ Intel-based Macs that support Mac OS X v10.7 Lion.         ▪ A blank disc or USB storage device for creating Windows 7 Boot Camp Support Software (driver) installer media. You can also create media containing ISO images of Windows 7 and drivers.         ▪ For 32-bit systems, at least 16 GB of free space on the disk where you install the software; for 64-bit systems, at least 20 GB of free space (for Microsoft Windows and Windows-based applications). If you are installing from the Windows 7 DVD, you will need one of the following Microsoft Windows discs:         ▪ Genuine 32-bit Microsoft Windows 7 Home Premium, Professional or Ultimate CD.         ▪ Some Macs require a genuine 64-bit Microsoft Windows 7 Home Premium, Professional or Ultimate disc.         ▪ You can also refer to the following link         ▪ http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf    (3) After confirmation, and after backing up your own files, proceed to the formal installation steps: The detailed steps for installing win7 are as follows: (1): First, after merging and backing up the partitions, open the bootcamp option in the utility, insert the win7 CD, and select only "install windows 7" in the bootcamp interface. Do not choose the rest. Click "Continue" (2): After reaching another interface, you can see the "Partition" prompt, it is recommended to give half of the partition space to win7 here, and select "Equal" partition! Wait until the disk partition is complete! (3): At this point, the screen will jump to the windows installation interface, and "windows is loading files..." will appear. (4): To do this, you need to raise the spirit of 12 points, because the following steps cannot be missed! First of all, you need to pay attention to the area where the Windows partition is installed is the bootcamp partition, which is simply the partition with the largest capacity, with the words "bootcamp". (If you choose the wrong one, it will affect the Apple system, and eventually you need to reinstall the Apple operating system, which is very troublesome, so be sure to choose the right one!!!!) (5): In "Advanced Load Driver", select "Format", the system will automatically format the partition of "bootcamp" (6): After the automatic partition is formatted, the word "Installing" will appear, At this time, it means that the installation is in progress and you have purchased it, just wait! Installation time is about 20 minutes. The whole process is fully automatic. (7): After the installation is complete, enter bootcamp to download the driver! The steps to download the driver are as follows: After entering bootcamp, select "Download the latest Windows support software from apple"!