Symptom: In the Win7 system installed by VMware, the virtual machine setting USB controller has been turned on, and the USB2.0 U disk can be recognized, but the USB3.0/3.1 U disk is not recognized (I use Kingston U3.1).
Try the solution:
1: Check whether the Vmware USB service of the local system is enabled, and restart the virtual machine for verification.
2: Win7 virtual machine settings --> USB controller --> select USB3.1, restart verification. as shown in the picture
3: Install the Intel® USB 3.0 driver on the virtual machine ; select the inserted U disk for the removable device.
ps: If the driver is installed, an error will be reported: Unrecognizable.... Shut down the virtual machine, operate plan 2, and install the driver again after restarting.
The problem I encountered was solved by using solution 3, and it was successfully identified!
