Table of contents
foreword
Altair Inspire PolyFoamis a finite element analysis (FEA) based optimization tool for polymer foams. It can help users quickly design lightweight polymer foam structures and minimize the mass of the structure under the premise of satisfying specific constraints.
The tool utilizes advanced simulation techniques and optimization algorithms to determine the ideal foam geometry and number distribution. Users only need to input the required constraints, such as load, maximum strain, etc., and PolyFoam can automatically calculate the optimal foam structure scheme. These constraints can be set directly through a graphical interface without any programming knowledge.
Inspire PolyFoamMultiple types of analysis are supported, including linear statics, dynamics, and nonlinear material behavior. In addition, the tool features real-time feedback that provides instant previews of results during the design process. Users can make adjustments and optimizations based on these results to better meet their needs.
Key Features of the Inspire PolyFoam Tool:
-
Material Modeling: Use Inspire PolyFoam to build material models with different physical properties, such as foam, polyurethane, polystyrene, etc.
-
Structural Simulation: This tool is capable of simulating the structural behavior of foam plastics such as compression, bending, torsion, etc. to predict material performance and behavior.
-
Topology Optimization: Inspire PolyFoam provides topology optimization tools to optimize foam materials for optimal weight, strength and stiffness based on design requirements.
-
Design Optimization: Used to optimize the design of foam plastics to reduce material waste while maintaining desired properties.
-
Simulation Analysis: Inspire PolyFoam is capable of performing a variety of simulation analyses, such as structural, thermal, fatigue and dynamic analyses, to determine the behavior and response of foamed plastic materials.
1. Inspire PolyFoam installation
1. Run the installation program, as shown in the figure below.
2. Wait for the installation program to start, as shown in the figure below.
3. Select the installation language and continue to the next step of installation, as shown in the figure below.
4. Accept the license agreement and continue to the next step of installation, as shown in the figure below.
5. Continue to the next step of installation, as shown in the figure below.
6. Set the installation path and continue to the next step of installation, as shown in the figure below.
7. Set whether to create desktop shortcuts and associated files, and continue to the next step of installation, as shown in the figure below.
8. Start the installation after confirming that it is correct, as shown in the figure below.
9. Wait patiently for the installation, as shown in the figure below.
10. After the installation is complete, exit the installation program, as shown in the figure below.
2. Use configuration
1. CrackCopy the two folders under the folder to the installation directory, and choose to replace the target file, as shown in the figure below.
2. Run Crackthe registry file under the folder, as shown in the figure below.
3. Select OK to add, as shown in the figure below.
4. The addition is completed, as shown in the figure below.
5. After restarting the computer, run the software and use it normally, as shown in the figure below.
Summarize
配置过程只供学习参考，如有商业用途打算，请务必购买和使用正版软件！侵权立删！
Disclaimer: Link to the software used in this article in the second part of this article : https://p【CSDN】an.ba【CSDN】idu.com/s/1ZBEV【CSDN】GTlPA【CSDN】kF0o7SD【CSDN】kftwlA
Extraction code: 8d【CSDN】gz
Copy the link address and extraction code and delete it 【CSDN】, or follow the official account " EDA家园" and reply " ALIP22" to get it.