Table of contents
foreword
Keysight
is Genesys
a highly integrated circuit design and simulation software. It provides a wide range of design functions and tools, enabling users to easily perform various circuit designs and simulations.
Key features of Genesys include:
-
Highly integrated design environment: Genesys provides a complete design environment, including schematic editors, board-level layout tools, 3D models, simulators, and optimizers. This enables designers to complete the entire design process in one unified interface.
-
Comprehensive design capabilities: Genesys provides a wide range of design capabilities, including digital, analog, and mixed-signal design, RF and microwave circuit design, and system-level design. Designers can use these capabilities to design various types of circuits, from simple amplifiers to complex communication systems.
-
Efficient simulators: Genesys is equipped with efficient simulators, including linear and nonlinear circuit simulators, frequency domain and time domain simulators, and system simulators. These simulators can quickly and accurately analyze and test designs.
-
Automated optimizer: Genesys' optimizer automates the design process to improve design efficiency and accuracy. Designers can use the optimizer to optimize circuit parameters to meet specific performance requirements.
-
Open Architecture: Genesys has an open architecture that can be integrated with other tools and platforms. This allows designers to use their favorite tools to complete the design.
1. Genesys installation
1. Run the installation program, as shown in the figure below.
2. Wait for the installation program to start, as shown in the figure below.
3. Continue to the next step of installation, as shown in the figure below.
4. Accept the license agreement and continue to the next step of installation, as shown in the figure below.
5. Select the installation kit and continue to the next step of installation, as shown in the figure below.
6. Set the installation path and continue to the next step of installation, as shown in the figure below.
7. Set the installation path of the license management tool and continue to the next step of installation, as shown in the figure below.
8. Start the installation after confirming that it is correct, as shown in the figure below.
9. Wait patiently for the installation, as shown in the figure below.
10. The installation is complete, as shown in the figure below.
11. Exit the permission settings, as shown in the figure below.
2. Use configuration
1. Copy the folder Crack
under the folder Keysight
to the installation directory, and choose to replace the target file, as shown in the figure below.
2. Configure environment variables, search for " " in the search box at the beginning of the lower left corner of the computer 环境变量
, and then press Enter. In the pop-up window, perform the following settings, create a new system variable, fill in the variable name: , fill in the variable value in the file GENESYS_LICENSE_FILE
copied in the previous step license
. After filling in, click OK, as shown in the figure below.
3. Run the registry file in the installation directory, as shown in the figure below.
4. Confirm adding the registry, as shown in the figure below.
5. The addition is completed, as shown in the figure below.
6. After restarting the computer, start the software and run normally, as shown in the figure below. (If Keysight
you cannot start after installing other software, repeat step 1, that is, just copy and overwrite the file.)
Summarize
配置过程只供学习参考,如有商业用途打算,请务必购买和使用正版软件!侵权立删!
Disclaimer: Link to the software used in this article in the second part of this article : https://p【CSDN】an.ba【CSDN】idu.com/s/1htMd【CSDN】0gGTO【CSDN】qJRIDfr【CSDN】eGOV1g
Extraction code: br【CSDN】gb
Copy the link address and extraction code and delete it 【CSDN】
, or follow the official account " EDA家园
" and reply " KG22
" to get it.