Table of contents
foreword
KeysightThe EP-Scantool is a software for scanning electronic component boards (PCB). It can help engineers quickly detect potential electrical problems such as resistance, capacitance, inductance, shorts, and opens.
EP-Scan has the following features:
- Efficient: EP-Scan can quickly scan large PCB boards, and at the same time analyze and process the scan results, providing real-time electrical analysis and reports.
- Accurate: EP-Scan has high-precision measurement capabilities to detect minor electrical problems such as tiny shorts, opens or other abnormalities.
- Automation: EP-Scan can automate the scanning process, reducing the cost and errors of manual operations, while also improving accuracy and efficiency.
- Monitoring: EP-Scan can monitor the electrical performance of the board in real time and provide alarms and reports so that engineers can quickly diagnose and solve problems.
- Ease of use: EP-Scan has an intuitive user interface and easy-to-use functions, which can help engineers quickly master the operation and use of the software.
1. EP-Scan installation
1. Run the installation program, as shown in the figure below.
2. Wait for the installation program to start, as shown in the figure below.
3. Continue to the next step of installation, as shown in the figure below.
4. Accept the license agreement and continue to the next step of installation, as shown in the figure below.
5. Continue to the next step of installation, as shown in the figure below.
6. Set the installation path and continue to the next step of installation, as shown in the figure below.
7. Start the installation after confirming that it is correct, as shown in the figure below (if you have installed Keysightother license management tools EEsof_License_Tools, this step does not need to be set, and it will be selected by default. If you have not installed it before, you need to set the installation of license management tools path, as shown in the figure below).
8. Wait patiently for the installation, as shown in the figure below.
9. After the installation is complete, exit the installation program, as shown in the figure below.
10. Exit the permission settings, as shown in the figure below.
2. Use configuration
1. Copy the files Patchunder the folder EP-Scan2023under the folder to the installation directory, and choose to replace the target file, as shown in the figure below.
2. Start the software and run normally, as shown in the figure below.
Summarize
配置过程只供学习参考，如有商业用途打算，请务必购买和使用正版软件！侵权立删！
Disclaimer: Link to the software used in this article in the second part of this article : https://pa【CSDN】n.ba【CSDN】idu.com/s/1988B【CSDN】sBp_Z【CSDN】-iKFVZJ【CSDN】h6A5VA
Extraction code: yd【CSDN】to
Copy the link address and extraction code and delete it 【CSDN】, or follow the official account " EDA家园" and reply " KE23" to get it.