Table of contents
foreword
PWSG DesktopThe tool is a desktop application that can be used to communicate and control Keysight's Pulse/Pattern Generator (PPG) and Arbitrary Waveform Generator (AWG). The tool provides an intuitive user interface that enables users to easily create, edit and load various types of waveforms and pulse sequences.
PWSG DesktopThe tool supports a variety of waveform types, including sine wave, square wave, sawtooth wave, triangle wave, Gaussian pulse, rectangular pulse, etc., and you can also create custom waveforms. Users can freely select parameters such as frequency, amplitude, phase and offset of the waveform, and add, edit and delete pulse sequences to generate complex waveforms.
In addition, PWSG Desktopthe tool supports import and export of various file formats, including CSV, MATLAB, Waveform, Pulse, and Sequence, among others. Users can easily save the waveforms and pulse sequences they create as files and share them with other users.
PWSG DesktopThe tool also provides rich control options, such as automation scripts, remote control and multi-device synchronization, etc. Users can automate the testing process by writing simple Python scripts, and use the remote command controller to control remote devices. The multi-device synchronization feature allows users to control multiple devices simultaneously for more complex testing.
1. PWSG Desktop installation
1. Run the installation program, as shown in the figure below.
2. Continue to the next step of installation, as shown in the figure below.
3. Accept the license agreement and proceed to the next step of installation, as shown in the figure below.
4. After confirming that there is no error, start the installation, as shown in the figure below.
5. Wait patiently for the installation, as shown in the figure below.
6. After the installation is complete, exit the installation program, as shown in the figure below.
2. Use configuration
1. Copy the files Crackin the folder dllto the corresponding bin path in the installation directory, and select to replace the target file, as shown in the figure below.
2. Start the software and run normally, as shown in the figure below.
Summarize
Disclaimer: The configuration process of the second part of this article 只供学习参考，如有商业用途打算，请务必购买和使用正版软件！侵权立删！
Link to the software used in this article: https://p【CSDN】an.ba【CSDN】idu.com/s/1b0【CSDN】QVdQz【CSDN】R0NLE64【CSDN】0OF3RtpQ
Extraction code: wp【CSDN】6h
Copy the link address and extraction code and delete it 【CSDN】, or follow the official account " EDA家园" and reply " KP21" to get it.