I don't know if you know the remote desktop connection of the computer. The remote desktop connection means that when a computer has the remote desktop connection function enabled, we can control the computer on the other end of the network. But recently, some netizens said that the remote desktop of their computer cannot be connected , so what should we do at this time? Let me tell you the following editor!
Solution for remote desktop connection not working:
Step 1: First, you need to query and record the computer under remote control. You must know the IP of the remote computer. First, click the start menu of the computer, and then select the run option in the start menu. After entering the computer's running page, in the corresponding Enter cmd in the location, and after successful input, press the Enter button of the computer keyboard, here we can record and view the IP of the remotely controlled computer.
Step 2: After querying the IP of the remote computer, you need to set an independent password for the corresponding computer before setting the account of the computer.
Step 3: After successfully setting the password, open the properties option of the computer, then click the remote option, and then select the remote login option in the pop-up menu.
Step 4: After entering the motion sickness login page, open the power settings window of the computer, and then set the power supply to the standby state, because if the computer enters the sleep state, remote login cannot be performed.
Step 5: After completing the above operations, turn off the computer's firewall. After successfully closing the computer's firewall, we can connect to the remote desktop.
If the above operations still fail to connect to the remote desktop, the next step needs to be performed, and the computer must be checked and set accordingly.
Step 6: Use the right mouse button to click the computer icon of the computer, and then select the properties option. After opening the properties of the computer, click the remote setting option, and then make the corresponding selection. You need to assist in the connection.
Step 7: After completing the above settings, we can make a remote connection to the computer desktop. If the connection to the remote desktop is still not possible, the next step is required.
Step 8: To set the firewall, first open the control panel of the computer, then select the firewall, and then select the advanced settings option in the menu. After entering, open the file and printer sharing option of the computer, and then select the enable option. , after the rules in the sharing are successfully activated, the remote connection to the computer desktop can be completed.