When you want to develop at home (access various services on the company's intranet such as databases, WIKI, etc.) and the company does not open a VPN for you, there will be such a need.
Let’s briefly introduce the functions of the following three tools:
TeamViewer
Allows you to connect point-to-point at home directly to your own computer on the company's intranet. You can get a virtual company IP, and you can use this IP to connect to the company computer directly at home (the other way around doesn't seem to work).
CCProxy
Internet sharing software. The main function is to let other computers (home computers) on the same local area network access the Internet through this computer (company computer).
Proxifier
Agent online management. For example, if you want to use a proxy to access some IPs, but do not use a proxy to access other IPs, use this software to set it up.
Let the above three software work together to realize that the computer at home can access other services in the company's local area network.
First of all, both the company computer and the home computer must be installed with TeamViewer, and a VPN must be selected during installation. Of course, if you install it with the default settings, it is not installed, and you don't need to reinstall it.
Click the other ==> option on the panel,
Open the settings window, find Advanced == "Show advanced settings, pull the scroll bar on the right, as shown in the figure, install the vpn
After installation, connect your home computer to the company computer using VPN as follows.
After the connection is successful, you can see the partner's IP, that is, the IP of your company's computer. You can use this IP to access the company computer on your computer.
Next, install CCProxy on the company computer (the free version can be used by three people).
After installation, check the settings as needed. General SOCKS on it. The port numbers are fine as long as they do not conflict. Remember this port (1080) number and use it later.
Click on the account, select the allowed part of the allowable range, select the IP address for the authentication type, and click New to create a new user.
The account password is set by yourself, which will be used later. Click OK to save.
The company computer is ready. Then install Proxifier on your home computer. There is a fee for this.
After installation, click [Configuration File] and then click [Add]
The address is the partner IP of the previous teamviewer, and the port is the port number in the SOCKS of the previous CCProxy. The default is 1080.
Select SOCKS as the protocol, and use the username and password set by CCProxy above. Click [Check] to test the connection. After success, click OK to save.
Also set the rules. The rule is to tell you which IPs to use the proxy to access which and which not to use.
On Proxifier, click [Configuration File], then click [Proxy Rules], and then click [Add]
This step is to specify which IPs are to be accessed by the proxy. Action Select the SOCKS proxy configured in the previous step. Click OK to save.
Then change the order in the [Proxy Rules] list, and put the ones you added on the top. That is, use your own rules to check the IP first, and if you don't have a hit, you don't need a proxy, and use a direct connection.
Click OK to start.
refer to: