1. Use the Console line to connect any host to the switch that needs to be configured for the first time, as shown in the figure.
Note: You must use this line to connect to the corresponding interface (RS 232→Console), otherwise nothing will be displayed on the terminal and no commands can be executed.
2. Select the host connected to the Console line, open "Desktop", and select "Terminal".
3. The serial port configuration is as follows:
4. Press Enter once to start inputting commands.
[Graphic tutorial] In Cisco Packet Tracer, enter the CLI and configure the 2960-24TT and other switches for the first time
Guess you like
Origin blog.csdn.net/COFACTOR/article/details/109239898
Recommended
Ranking