Reference blog address
First, we have to install a piece of software that can simulate the operation of the operating system. Here we choose VMwareWorkstation.
After the installation is over, open the network and Internet settings, click the change adapter option, and check if there are the following two virtual network cards. If yes, the installation is successful
After the installation is successful, we choose the CentOS6.5 version of Linux to install. After downloading the image file (.iso), it can be installed. The installation steps are as follows:
This is our image file, i386 stands for 32-bit (select 32 or 64-bit according to your computer)
double-click to start VMware and select a new virtual machine.
Note: The image is 64-bit and needs to be 64-bit
Since the iso image file was not specified just now, we need to specify the system image file before starting the virtual machine.
Find the location of your image:
This prompt box appears after booting, not an error prompt box, check Don’t prompt for confirmation.
If the following error occurs, it means that the computer is not enabled for CPU virtualization. If you need to enable it, you need to restart the computer And when it is turned on, enter the BIOS settings of the motherboard to turn on virtualization, then save the settings and restart the computer (sometimes there are problems due to the settings of software such as 360).
It does not matter if Kdump cannot be enabled here.