U disk jailbreak iPhone ID around the latest tutorial and various pit solutions, vomiting blood (super detailed and super simple tutorial)-balenaEtcher-Checkm8-bootra1n
This is a successful tutorial after installing multiple Apple versions and virtual machine versions. Since resources are uploaded to Baidu cloud disk and download only tens of KB, so in order for everyone to experience the Apple system as soon as possible, please add QQ Group communication download: 1064543120
1. Tool download
1. Prepare a Windows computer
2. Prepare a >2G storage U disk
3. Download the balenaEtcher, Checkm8.info_iCloudBypass, bootra1n three files in the group file
(The files in the group are continuously being updated and other similar tools are shared. The specific version is subject to the new version in the group, and the latest version of iOS is currently supported )
Two, tool installation
1. Open the downloaded tool balenaEtcher on the Windows computer, click install, it will automatically open after installation
2. Click " Select image " to select the downloaded bootra1n image
3. Insert the prepared U disk into the computer, click " Select drive ", and select the inserted U disk
4. Wait for the USB flash drive to start and make it complete.
Three, operation tutorial
1. Plug the made U disk and the mobile phone that needs to be jailbroken into the shut down notebook and desktop computer, and start the computer to enter the BIOS ( press F12/Del to start the computer , and the options for entering Bios are different for each model. You can click Baidu for details ) , After entering the bios, select the U disk to start and save in the startup mode. At this time, the computer will restart to enter the following interface:
2. After entering the screenshot interface above, select the third item and press Enter to enter the following interface. After the interface is loaded, directly enter " anon " or " root " and press Enter, and enter " voidlinux " for the password and press Enter (Password input is not visible, please press enter after input), continue to enter " sudo checkra1n " and press Enter.
3. After pressing Enter in the second step, you will enter the following interface, select the " Options " option with the left and right keys on the keyboard to enter the configuration interface.
4. The configuration interface is as follows. At this time, use the keyboard up and down keys to select " Safe Mode " and " Verbose Boot ", and use Enter to check, " X " appears to represent the check, and then select " BAC "
5. Return to the interface under the third step-"Home page, select " Start " to enter the following interface, and click " Next " to enter the next step.
6. After clicking "Next", enter the following interface, this interface is to let the phone enter DFU mode, when you reach this interface, directly click "Start", take IPhone5S as an example, first press the shutdown button for 2-3 seconds, colleagues press Hold the volume down button and release the power button immediately after the phone goes black. Remember to hold down the volume down button. After about 4-5S, the phone will enter DFU mode. The phone is in a black screen state after entering this mode. (Other models of mobile phones can enter DFU mode under Baidu, or each mobile phone model can enter DFU mode in the group announcement, you can check the group announcement . Time control at this location is more important), if the entry fails, only restart, try a few more times.
7. After entering the DFU mode, it will automatically jump to the following interface to start jailbreaking.
Note: There are several pits in this place. Some mobile phone flashing opportunities report various errors. If an error is reported, you can try to unplug the UPan, and restart the operation from the first step after the computer is turned off and plugged in.
If the interface is stuck on the " Right before trigger (this is the real bug setup) " interface for more than 5 minutes without any response (as shown in the second picture below), unplug the data cable on the mobile phone at this time, and the interface will report " DFUSyncUpload FALLED: -1 "error (as shown in the third picture below), don't panic at this time~, plug in the data cable on the side of the mobile phone, and the mobile phone will start the automatic jailbreak operation (see the corresponding reference picture below step 8).
8. Start the jailbreak, the mobile phone interface is as follows (the host is relatively poor, please ignore the broken screen of the phone, rich bosses can give rewards, and those who don’t have money can also click for support, thank you very much), wait for the phone code to load automatically After that, the phone will restart.
9. If you have an ID phone, after jailbreaking, the following interface will appear after the phone restarts. If you don’t have an ID phone, please ignore steps 9 and 10
10. Don't panic at this time~, find a computer with an Apple system or a black apple (for the black apple installation tutorial, please refer to my other blog: https://blog.csdn.net/yioye/article/details/106094086 , resources All are free, so everyone can also put it in the corresponding QQ group file sharing of the blog) system, connect to the Apple mobile phone that has just been jailbroken, open the Checkm8.info_iCloudBypass software in the Apple system, click Start Bypass, and the phone will take about a few seconds. Bypass the ID and enter the main screen normally.
11. At this time, when the mobile phone enters the main screen, it is impossible to make calls and surf the Internet. You can download and install the software normally, and log in your ID in the APPStore to download normally. It can also be downloaded through the "Cydia" software on the mobile phone interface, but it is relatively slow. There are many beautification and auxiliary software in it. A good software source address is recommended: "Ant Ant source https://apt.cydia.love", Downloading source software is faster than other sources.
Note: Try not to shut down the phone and restart it. The jailbreak function will be invalid after shutting down. Otherwise, if you want to use "Cydia" to install the software, you have to re-plug the U disk and try to jailbreak again. There is the "checkra1n" software on the phone interface, which means that the phone is in jailbroken status, and no representative is not jailbroken. After the jailbreak, Aisi Assistant cannot detect the jailbreak.
If you guys think the article is useful to you, you can add the following group to follow me more: 1064543120