目录
一、apache监控
基于第三方模板利用httpd自带的status页面进行监控
1、开启http-status功能
[root@zabbix6 conf.d]# ls /etc/httpd/modules/ | grep status
mod_status.so
2、配置status允许访问的地址，实际环境勿全部允许
[root@zabbix6 ~]# vi /etc/httpd/conf.d/status.conf
ExtendedStatus On
<location /server-status>
SetHandler server-status
Order Allow,Deny
Allow from all
</location>
[root@zabbix6 conf.d]# service httpd restart
3、下载部署zapache模块
[root@zabbix6 ~]# git clone https://github.com/lorf/zapache.git
[root@zabbix6 ~]# cp -r zapache/zapache /etc/zabbix/libexec/
[root@zabbix6 ~]# cp zapache/userparameter_zapache.conf.sample /etc/zabbix/zabbix_agentd.d/userparameter_zapache.conf
[root@agent1 zapache]# chmod 755 /etc/zabbix/libexec/*
[root@agent1 zapache]# vi /etc/zabbix/zabbix_agentd.d/userparameter_zapache.conf
修改为UserParameter=zapache[*],/etc/zabbix/libexec/zapache \$1
4、zabbix页面载入模板
配置——模板——导入——选择下载好的模板文件zapache-template.xml
配置——主机——链接相应的模板Template App Apache Web Server zapache
5、压力测试（如果需要快速出图的话）
[root@server ~]# echo 65535 > /proc/sys/net/core/somaxconn
[root@server ~]# ulimit -HSn 65535
[root@server ~]# ab -c 1000 -n 1000000 http://192.168.10.41/index.html
6、设置个聚合图形方便监测
二、nginx监控
1、部署Nginx，并开启status模块
[root@agent1 nginx-1.15.7]# ./configure --prefix=/usr/local/nginx --with-http_stub_status_module
yum -y install gcc gcc-c++ autoconf automake make
yum -y install pcre-devel
yum install -y zlib-devel
[root@agent1 nginx-1.15.7]# make
[root@agent1 nginx-1.15.7]# make install
2、开启status功能
nginx.conf文件添加server标签下面
location /status {
stub_status on;
access_log off;
#allow 127.0.0.1;允许哪个ip可以访问
}
3、启动Nginx
[root@agent1 ~]# /usr/local/nginx/sbin/nginx
如果启动失败，端口占用，更换端口尝试，注意selinux和端口开通#测试
[root@agent1 ~]# curl http://192.168.198.41:8080/status
Active connections: 3
server accepts handled requests
4 4 3
Reading: 0 Writing: 1 Waiting: 2
active connections – 活跃的连接数量
server accepts handled requests — 总共处理了N个连接 , 成功创建N次握手, 总共处理了N个请求
reading — 读取客户端的连接数.
writing — 响应数据到客户端的数量
waiting — 开启 keep-alive 的情况下,这个值等于 active – (reading+writing), 意思就是 Nginx 已经处理完正在等候下一次请求指令的驻留连接.
4、配置znginx
下载znginx
git clone https://github.com/BaiShuming/znginx
Znginx 是一款基于zabbix对Nginx监控的一个模板
Znginx 需要Nginx ngx_http_stub_status_module支持
Znginx 对Nginx服务状态进行监控、并通过触发器报警
Znginx 对连接状态进行监控，并设置图表
Znginx 提供了zabbix监控插件文件
sudo mkdir /etc/zabbix/libexec/
sudo cp znginx/znginx /etc/zabbix/libexec/
sudo cp znginx/userparameter_znginx.conf.sample /etc/zabbix/zabbix_agentd.d/userparameter_znginx.conf
https://github.com/BaiShuming/znginx
zabbix server web
配置---模板---导入
zbx_export_templates.xml
三、mysql监控
1、环境搭建
[root@agent1 libexec]# yum install mysql mysql-server -y
[root@agent1 ~]# service mysqld restart
[root@agent1 ~]# mysqladmin -u root -h 127.0.0.1 status
Uptime: 60 Threads: 1 Questions: 4 Slow queries: 0 Opens: 15 Flush tables: 1 Open tables: 8 Queries per second avg: 0.66
2、利用三方percona
运行环境php php-mysql下载
yum -y install mariadb-server php php-mysql
下载三方mysql-zabbix监控包
wget https://www.percona.com/downloads/percona-monitoring-plugins/percona-monitoring -plugins-1.1.8/binary/redhat/6/x86_64/percona-zabbix-templates-1.1.8-1.noarch.rpm
[root@agent1 ~]# rpm -ivh percona-zabbix-templates-1.1.8-1.noarch.rpm
warning: percona-zabbix-templates-1.1.8-1.noarch.rpm: Header V4 DSA/SHA1 Signature, key ID cd2efd2a: NOKEY
Preparing... ########################################### [100%]
1:percona-zabbix-template########################################### [100%]
3、列出脚本文件和配置文件的路径
Scripts are installed to /var/lib/zabbix/percona/scripts
Templates are installed to /var/lib/zabbix/percona/templates
4、修改mysql用户密码信息
[root@agent1 scripts]# vi /var/lib/zabbix/percona/scripts/ss_get_mysql_stats.php
5、测试脚本有结果说明正常
[root@agent1 scripts]# sh get_mysql_stats_wrapper.sh iz
8
6、相应脚本和键值对配置文件放入相应位置
[root@agent1 templates]# cp userparameter_percona_mysql.conf /etc/zabbix/zabbix_agentd.d/
[root@agent1 scripts]# cp /var/lib/zabbix/percona/scripts/* /etc/zabbix/libexec/
[root@agent1 templates]# chown zabbix.zabbix /tmp/localhost-mysql_cacti_stats.txt
7、zabbix界面上传模板文件-主机关联-图形展示
如果percona官网下载的zabbix_agent_template_percona_mysql_server_ht_2.0.9-sver1.1.8模板上传报错
可能是不兼容zabbix3.0的原因，可以在我的下载里面下载兼容版本，叫zbx_export_templates.xml。
https://download.csdn.net/download/weixin_39855998/11457888
四、redis监控
建议使用centos7进行实验，centos6因python版本会导致问题，目前我在坑中。。
1、安装redis
Redis是一个key-value存储系统，它支持丰富的数据类型，Redis以内存作为数据存储介质，所以读写数据的效率极高
Redis跟memcache不同的是，储存在Redis中的数据是持久化的，断电或重启后，数据也不会丢失。因为Redis的存储分为内存存储、磁盘存储和log文件三部分，重启后，Redis可以从磁盘重新将数据加载到内存中，这些可以通过配置文件对其进行配置。
Redis支持主从模式，可以配置集群，这样更利于支撑起大型的项目。
#源码安装
[root@agent1 redis-5.0.2]# wget http://download.redis.io/releases/redis-5.0.2.tar.gz
[root@agent1 redis-5.0.2]# tar zxvf redis-5.0.2.tar.gz
[root@agent1 redis-5.0.2]# make PREFIX=/usr/local/redis && make install
如遇到错误如下，删除redis文件夹重新解压编译
cd src && make all
make[1]: Entering directory `/root/redis-5.0.2/src'
LINK redis-server
cc: ../deps/jemalloc/lib/libjemalloc.a：没有那个文件或目录
make[1]: *** [redis-server] 错误 1
make[1]: Leaving directory `/root/redis-5.0.2/src'
make: *** [all] 错误 2
#配置redis
[root@agent1 ~]# mkdir /usr/local/redis/etc
[root@agent1 ~]# cp redis-5.0.2/redis.conf /usr/local/redis/etc/
[root@agent1 ~]# vi /usr/local/redis/etc/redis.conf
bind 0.0.0.0 允许所有地址访问
daemonize yes 后台
#启动加载配置文件
[root@agent1 etc]# /usr/local/redis/bin/redis-server /usr/local/redis/etc/redis.conf
#测试。可以自定义shell利用info获取相关信息
[root@agent1 etc]# ln -s /usr/local/redis/bin/* /usr/local/bin/
[root@agent1 etc]# redis-cli -h 127.0.0.1 -p 6379 info
2、被检测机安装配置三方模板
#模板系统要求，需要python和redis-py环境
centos6自带python，pip为python安装命令，先安装pip，再安装redis-py环境
[root@agent1 ~]# python -s
Python 2.6.6 (r266:84292, Jul 23 2015, 15:22:56)
[root@agent1 ~]# yum install -y epel-release
[root@agent1 ~]# yum install -y python-pip
[root@agent1 ~]# pip install redis
#三方脚本相关配置改为自己服务器对应的IP和地址
[root@agent1 zbx_redis_template]# vi zbx_redis_stats.py
zabbix_host = '192.168.198.130' # Zabbix Server IP
def send_to_zabbix(metrics, zabbix_host='192.168.198.130', zabbix_port=10051):
[root@agent1 zbx_redis_template]# vi zbx_redis.conf
UserParameter=redis.discovery,/etc/zabbix/libexec/zbx_redis_stats.py localhost list_key_space_db
UserParameter=redis[*],/etc/zabbix/libexec/zbx_redis_stats.py $1 $2 $3
#将脚本文件和键值对配置文件放到自身对应目录
[root@agent1 zbx_redis_template]# cp zbx_redis_stats.py /etc/zabbix/libexec/
[root@agent1 zbx_redis_template]# chmod 755 /etc/zabbix/libexec/
[root@agent1 zbx_redis_template]# cp zbx_redis.conf /etc/zabbix/zabbix_agentd.d/
#配置完成，重启服务
[root@agent1 zbx_redis_template]# ps -ef | grep redis
root 16892 1 0 06:06 ? 00:00:02 /usr/local/redis/bin/redis-server 0.0.0.0:6379
root 18269 17441 0 06:43 pts/0 00:00:00 grep redis
[root@agent1 zbx_redis_template]# /etc/init.d/zabbix-agent restart
Shutting down Zabbix agent: [确定]
Starting Zabbix agent: [确定]
3、zabbix界面导入模板配置
发现主机redis监控报错不支持
Received value [Traceback (most recent call last): File "/etc/zabbix/libexec/zbx_redis_stats.py", line 3, in <module> import sys, redis, json, re, struct, time, socket, argparse File "/usr/lib/python2.6/site-packages/redis/__init__.py", line 1, in <module> from redis.client import Redis, StrictRedis File "/usr/lib/python2.6/site-packages/redis/client.py", line 3198 return {decode(encode(k)): v for k, v in iteritems(data)} ^SyntaxError: invalid syntax] is not suitable for value type [Numeric (float)]需要升级python版本，相关配置https://www.moewah.com/archives/391.html
目前yum使用正常，不出图暂时不知道解决方法，据说centos7默认python3，不会出现这些问题，待定。。日后学习python再回来看看。
五、tcp监控
1、监控脚本
[root@agent1 libexec]# pwd
/etc/zabbix/libexec
[root@agent1 libexec]# cat tcp_status.sh
#!/bin/bash
#this script is used to get tcp and udp connetion status
#tcp status
metric=$1
tmp_file=/tmp/tcp_status.txt
/bin/netstat -an|awk '/^tcp/{++S[$NF]}END{for(a in S) print a,S[a]}' > $tmp_file
case $metric in
closed)
output=$(awk '/CLOSED/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
listen)
output=$(awk '/LISTEN/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
synrecv)
output=$(awk '/SYN_RECV/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
synsent)
output=$(awk '/SYN_SENT/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
established)
output=$(awk '/ESTABLISHED/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
timewait)
output=$(awk '/TIME_WAIT/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
closing)
output=$(awk '/CLOSING/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
closewait)
output=$(awk '/CLOSE_WAIT/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
lastack)
output=$(awk '/LAST_ACK/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
finwait1)
output=$(awk '/FIN_WAIT1/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
finwait2)
output=$(awk '/FIN_WAIT2/{print $2}' $tmp_file)
if [ "$output" == "" ];then
echo 0
else
echo $output
fi
;;
*)
echo -e "\e[033mUsage: sh $0 [closed|closing|closewait|synrecv|synsent|finwait1|finwait2|listen|established|lastack|timewait]\e[0m"
esac
2、键值对脚本
[root@agent1 zabbix_agentd.d]# pwd
/etc/zabbix/zabbix_agentd.d
[root@agent1 zabbix_agentd.d]# cat zabbix_agentd.conf
UserParameter=tcp.status[*],/etc/zabbix/libexec/tcp_status.sh $1
3、server机测试
[root@zabbix6 ~]# zabbix_get -s 192.168.198.131 -k tcp.status[listen]
6
4、tcp监控模板
cat Template_TCP_Stats.xml
<?xml version="1.0" encoding="UTF-8"?>
<zabbix_export>
<version>2.0</version>
<date>2014-12-04T09:41:57Z</date>
<groups>
<group>
<name>Templates</name>
</group>
</groups>
<templates>
<template>
<template>Template TCP Connection Status</template>
<name>Template TCP Connection Status</name>
<groups>
<group>
<name>Templates</name>
</group>
</groups>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<items>
<item>
<name>CLOSED</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[closed]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>CLOSE_WAIT</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[closewait]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>CLOSING</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[closing]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>ESTABLISHED</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[established]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>FIN_WAIT1</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[finwait1]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>FIN_WAIT2</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[finwait2]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>LAST_ACK</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[lastack]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>LISTEN</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[listen]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>SYN_RECV</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[synrecv]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>SYN_SENT</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[synsent]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
<item>
<name>TIME_WAIT</name>
<type>0</type>
<snmp_community/>
<multiplier>0</multiplier>
<snmp_oid/>
<key>tcp.status[timewait]</key>
<delay>60</delay>
<history>90</history>
<trends>365</trends>
<status>0</status>
<value_type>3</value_type>
<allowed_hosts/>
<units/>
<delta>0</delta>
<snmpv3_contextname/>
<snmpv3_securityname/>
<snmpv3_securitylevel>0</snmpv3_securitylevel>
<snmpv3_authprotocol>0</snmpv3_authprotocol>
<snmpv3_authpassphrase/>
<snmpv3_privprotocol>0</snmpv3_privprotocol>
<snmpv3_privpassphrase/>
<formula>1</formula>
<delay_flex/>
<params/>
<ipmi_sensor/>
<data_type>0</data_type>
<authtype>0</authtype>
<username/>
<password/>
<publickey/>
<privatekey/>
<port/>
<description/>
<inventory_link>0</inventory_link>
<applications>
<application>
<name>TCP Status</name>
</application>
</applications>
<valuemap/>
</item>
</items>
<discovery_rules/>
<macros/>
<templates/>
<screens/>
</template>
</templates>
<triggers>
<trigger>
<expression>{Template TCP Connection Status:tcp.status[timewait].last()}>10000</expression>
<name>There are too many TCP TIME_WAIT status</name>
<url/>
<status>0</status>
<priority>4</priority>
<description/>
<type>0</type>
<dependencies/>
</trigger>
</triggers>
<graphs>
<graph>
<name>TCP Status</name>
<width>900</width>
<height>200</height>
<yaxismin>0.0000</yaxismin>
<yaxismax>100.0000</yaxismax>
<show_work_period>1</show_work_period>
<show_triggers>1</show_triggers>
<type>0</type>
<show_legend>1</show_legend>
<show_3d>0</show_3d>
<percent_left>0.0000</percent_left>
<percent_right>0.0000</percent_right>
<ymin_type_1>0</ymin_type_1>
<ymax_type_1>0</ymax_type_1>
<ymin_item_1>0</ymin_item_1>
<ymax_item_1>0</ymax_item_1>
<graph_items>
<graph_item>
<sortorder>0</sortorder>
<drawtype>0</drawtype>
<color>C80000</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[closed]</key>
</item>
</graph_item>
<graph_item>
<sortorder>1</sortorder>
<drawtype>0</drawtype>
<color>00C800</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[closewait]</key>
</item>
</graph_item>
<graph_item>
<sortorder>2</sortorder>
<drawtype>0</drawtype>
<color>0000C8</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[closing]</key>
</item>
</graph_item>
<graph_item>
<sortorder>3</sortorder>
<drawtype>0</drawtype>
<color>C800C8</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[established]</key>
</item>
</graph_item>
<graph_item>
<sortorder>4</sortorder>
<drawtype>0</drawtype>
<color>00C8C8</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[finwait1]</key>
</item>
</graph_item>
<graph_item>
<sortorder>5</sortorder>
<drawtype>0</drawtype>
<color>C8C800</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[finwait2]</key>
</item>
</graph_item>
<graph_item>
<sortorder>6</sortorder>
<drawtype>0</drawtype>
<color>C8C8C8</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[lastack]</key>
</item>
</graph_item>
<graph_item>
<sortorder>7</sortorder>
<drawtype>0</drawtype>
<color>960000</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[listen]</key>
</item>
</graph_item>
<graph_item>
<sortorder>8</sortorder>
<drawtype>0</drawtype>
<color>009600</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[synrecv]</key>
</item>
</graph_item>
<graph_item>
<sortorder>9</sortorder>
<drawtype>0</drawtype>
<color>000096</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[synsent]</key>
</item>
</graph_item>
<graph_item>
<sortorder>10</sortorder>
<drawtype>0</drawtype>
<color>960096</color>
<yaxisside>0</yaxisside>
<calc_fnc>2</calc_fnc>
<type>0</type>
<item>
<host>Template TCP Connection Status</host>
<key>tcp.status[timewait]</key>
</item>
</graph_item>
</graph_items>
</graph>
</graphs>
</zabbix_export>
5、zabbix前台相关设置
常规操作-导入-链接-出图成功
LISTEN：等待从任何远端TCP 和端口的连接请求。
SYN_SENT：发送完一个连接请求后等待一个匹配的连接请求。
SYN_RECEIVED：发送连接请求并且接收到匹配的连接请求以后等待连接请求确认。
ESTABLISHED：表示一个打开的连接，接收到的数据可以被投递给用户。连接的数据传输阶段的正常状态。
FIN_WAIT_1：等待远端TCP 的连接终止请求，或者等待之前发送的连接终止请求的确认。
FIN_WAIT_2：等待远端TCP 的连接终止请求。
CLOSE_WAIT：等待本地用户的连接终止请求。
CLOSING：等待远端TCP 的连接终止请求确认。
LAST_ACK：等待先前发送给远端TCP 的连接终止请求的确认（包括它字节的连接终止请求的确认）
TIME_WAIT：等待足够的时间过去以确保远端TCP 接收到它的连接终止请求的确认。
TIME_WAIT 两个存在的理由：
1.可靠的实现tcp全双工连接的终止；
2.允许老的重复分节在网络中消逝。
CLOSED：不在连接状态（这是为方便描述假想的状态，实际不存在）
