附zabbixdocker镜像地址
https://hub.docker.com/u/zabbix/
zabbix官方文档
https://www.zabbix.com/cn/download
1、关闭防火墙和selinux
# systemctl stop firewalld
# vi /etc/selinux/config
SELINUX=permissive
# setenforce 0
复制代码
[root@localhost ~]# systemctl is-active firewalld
active
[root@localhost ~]#
[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]#
[root@localhost ~]# getenforce
Enforcing
[root@localhost ~]# setenforce 0
[root@localhost ~]#
[root@localhost ~]# vi /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=permissive
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
2、添加zabbix存储库
# rpm -ivh https://repo.zabbix.com/zabbix/4.2/rhel/7/x86_64/zabbix-release-4.2-1.el7.noarch.rpm
[root@localhost ~]# rpm -ivh https://repo.zabbix.com/zabbix/4.2/rhel/7/x86_64/zabbix-release-4.2-1.el7.noarch.rpm
Retrieving https://repo.zabbix.com/zabbix/4.2/rhel/7/x86_64/zabbix-release-4.2-1.el7.noarch.rpm
warning: /var/tmp/rpm-tmp.fHl7KV: Header V4 RSA/SHA512 Signature, key ID a14fe591: NOKEY
Preparing... ################################# [100%]
Updating / installing...
1:zabbix-release-4.2-1.el7 ################################# [100%]
[root@localhost ~]# ls /etc/yum.repos.d/
mylocal.repo zabbix.repo3、安装zabbix-server-mysql和zabbix-web-mysql
# yum install -y zabbix-server-mysql zabbix-web-mysql
要在 MySQL支持下安装Zabbix服务器
要在 MySQL支持下安装Zabbix前端
要使用MySQL支持安装Zabbix代理
# yum install zabbix-proxy-mysql -y
[root@localhost ~]# yum install zabbix-proxy-mysql -y
Installed:
zabbix-proxy-mysql.x86_64 0:4.2.0-1.el7
Complete!对服务器进行自身监控
安装zabbix-agent客户端
# yum install zabbix-agent -y
设置开机自启动
# systemctl start zabbix-agent
# chkconfig zabbix-agent on
Installed:
zabbix-agent.x86_64 0:4.2.0-1.el7
Complete!
[root@localhost ~]#
[root@localhost ~]# chkconfig zabbix-agent on
Note: Forwarding request to 'systemctl enable zabbix-agent.service'.
Created symlink from /etc/systemd/system/multi-user.target.wants/zabbix-agent.service to /usr/lib/systemd/system/zabbix-agent.service.
[root@localhost ~]#4、安装并且启动mysql5.6及初始化数据库信息
# rpm -ivh http://repo.mysql.com/yum/mysql-5.6-community/el/6/x86_64/mysql-community-release-el6-5.noarch.rpm
[root@localhost ~]# rpm -ivh http://repo.mysql.com/yum/mysql-5.6-community/el/6/x86_64/mysql-community-release-el6-5.noarch.rpm
Retrieving http://repo.mysql.com/yum/mysql-5.6-community/el/6/x86_64/mysql-community-release-el6-5.noarch.rpm
Preparing... ################################# [100%]
Updating / installing...
1:mysql-community-release-el6-5 ################################# [100%]
[root@localhost ~]# cd /etc/yum.repos.d/
[root@localhost yum.repos.d]#
[root@localhost yum.repos.d]# ls
mylocal.repo mysql-community.repo mysql-community-source.repo zabbix.repo
[root@localhost yum.repos.d]#yum install -y mysql-community-server
Installed:
mysql-community-libs.x86_64 0:5.6.43-2.el6 mysql-community-server.x86_64 0:5.6.43-2.el6
Dependency Installed:
mysql-community-client.x86_64 0:5.6.43-2.el6 mysql-community-common.x86_64 0:5.6.43-2.el6 perl-Compress-Raw-Bzip2.x86_64 0:2.061-3.el7
perl-Compress-Raw-Zlib.x86_64 1:2.061-4.el7 perl-DBI.x86_64 0:1.627-4.el7 perl-IO-Compress.noarch 0:2.061-2.el7
perl-Net-Daemon.noarch 0:0.48-5.el7 perl-PlRPC.noarch 0:0.2020-14.el7
Replaced:
mariadb-libs.x86_64 1:5.5.60-1.el7_5
Complete!
启动mysqld服务
# systemctl start mysqld
设置开机自启动
# chkconfig mysqld on
[root@localhost ~]# systemctl start mysqld
[root@localhost ~]#
[root@localhost ~]# systemctl status mysqld
● mysqld.service - SYSV: MySQL database server.
Loaded: loaded (/etc/rc.d/init.d/mysqld; bad; vendor preset: disabled)
Active: active (running) since Wed 2019-04-03 01:21:03 CST; 12s ago
Docs: man:systemd-sysv-generator(8)
Process: 68300 ExecStart=/etc/rc.d/init.d/mysqld start (code=exited, status=0/SUCCESS)
Main PID: 68584 (mysqld)
CGroup: /system.slice/mysqld.service
├─68380 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --socket=/var/lib/mysql/mysql.sock --pid-file=/var/run/mysqld/mysqld.pid --basedi...
└─68584 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/log/mysqld....
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: Note: new default config file not created.
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: Please make sure your config file is current
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: WARNING: Default config file /etc/my.cnf exists on the system
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: This file will be read by default by the MySQL server
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: If you do not want to use this, either remove it, or use the
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: --defaults-file argument to mysqld_safe when starting the server
Apr 03 01:21:02 localhost.localdomain mysqld[68300]: [ OK ]
Apr 03 01:21:03 localhost.localdomain mysqld[68300]: Starting mysqld: [ OK ]
Apr 03 01:21:03 localhost.localdomain systemd[1]: mysqld.service: Supervising process 68584 which is not our child. We'll most likely not notice w...t exits.
Apr 03 01:21:03 localhost.localdomain systemd[1]: Started SYSV: MySQL database server..
Hint: Some lines were ellipsized, use -l to show in full.
[root@localhost ~]#
[root@localhost ~]# chkconfig mysqld on
[root@localhost ~]# 初始化数据库信息
# mysql_secure_installation
[root@localhost ~]# mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MySQL to secure it, we'll need the current
password for the root user. If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): //回车
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
... Success!
By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] y
... Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] n
... skipping.
By default, MySQL comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] y
- Dropping test database...
ERROR 1008 (HY000) at line 1: Can't drop database 'test'; database doesn't exist
... Failed! Not critical, keep moving...
- Removing privileges on test database...
... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
... Success!
All done! If you've completed all of the above steps, your MySQL
installation should now be secure.
Thanks for using MySQL!
Cleaning up...5、创建zabbix数据库，创建zabbix账号
# mysql -uroot -p
创建一个zabbix库并设置为utf8的字符编码格式
mysql> create database zabbix character set utf8 collate utf8_bin;
创建账户并且授权设置密码
给来自loclhost的用户zabbxi分配可对数据库zabbix所有表进行所有操作的权限，并且设定密码为zabbix
mysql> grant all privileges on zabbix.* to 'zabbix'@'localhost' identified by 'zabbix';
刷新
mysql> flush privileges;
[root@localhost ~]# mysql -uroot -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 10
Server version: 5.6.43 MySQL Community Server (GPL)
Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
#mysql -uroot -p123456 -e "create database zabbix default character set utf8
collate utf8_bin;"
#mysql -uroot -p123456 -e "grant all on zabbix. to 'zabbix'@'%' identified by
'zabbix';"
#mysql -uroot -p123456 -e "grant all on zabbix. to 'zabbix'@'localhost' identified by 'zabbix';"
或如下
mysql> create database zabbix character set utf8 collate utf8_bin;
Query OK, 1 row affected (0.00 sec)
mysql> grant all privileges on zabbix.* to 'zabbix'@'localhost' identified by 'zabbix';
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
mysql> exit
Bye6、导入默认的zabbix数据库信息
# zcat /usr/share/doc/zabbix-server-mysql-4.2.1/create.sql.gz | mysql zabbix -uzabbix -pzabbix
[root@localhost ~]# cd /usr/share/doc/zabbix-server-mysql-4.2.0/
[root@localhost zabbix-server-mysql-4.2.0]#
[root@localhost zabbix-server-mysql-4.2.0]# ls
AUTHORS ChangeLog COPYING create.sql.gz NEWS README
[root@localhost zabbix-server-mysql-4.2.0]#
[root@localhost zabbix-server-mysql-4.2.0]# zcat /usr/share/doc/zabbix-server-mysql-4.2.0/create.sql.gz | mysql zabbix -uzabbix -pzabbix
Warning: Using a password on the command line interface can be insecure.
[root@localhost zabbix-server-mysql-4.2.0]#7、修改zabbix_server.conf的配置文件
# grep ^DB /etc/zabbix/zabbix_server.conf
[root@localhost ~]# grep ^DB /etc/zabbix/zabbix_server.conf
DBHost=localhost
DBName=zabbix
DBUser=zabbix
DBPassword=zabbix# vi /etc/php.ini
在最后一行添加一下内容
php_value max_execution_time 300
php_value memory_limit 128M
php_value post_max_size 16M
php_value upload_max_filesize 2M
php_value max_input_time 3008、修改系统时间
安装ntp服务
# yum install ntpdate -y
调整为亚洲上海时区
# ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
同步时间服务器
# ntpdate us.pool.ntp.org
[root@localhost ~]# yum install ntpdate -y
……………………
……………………
Installed:
ntpdate.x86_64 0:4.2.6p5-28.el7.centos
Complete!
[root@localhost ~]# ntpdate us.pool.ntp.org
4 Apr 10:00:11 ntpdate[11904]: step time server 4.53.160.75 offset -32351.195618 sec
[root@localhost ~]# date
Thu Apr 4 10:00:26 CST 2019
[root@localhost ~]#
[root@localhost ~]# ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
[root@localhost ~]#
[root@localhost ~]# ntpdate us.pool.ntp.org
4 Apr 14:40:12 ntpdate[2807]: step time server 72.30.35.89 offset -32392.501158 sec
[root@localhost ~]#
[root@localhost ~]# date
Thu Apr 4 14:40:32 CST 2019
[root@localhost ~]#9、修改配置文件/etc/httpd/conf.d/zabbix.conf，时区改成 Asia/Shanghai
# vi /etc/httpd/conf.d/zabbix.conf
[root@localhost ~]# vi /etc/httpd/conf.d/zabbix.conf
#
# Zabbix monitoring system php web frontend
#
Alias /zabbix /usr/share/zabbix
<Directory "/usr/share/zabbix">
Options FollowSymLinks
AllowOverride None
Require all granted
<IfModule mod_php5.c>
php_value max_execution_time 300
php_value memory_limit 128M
php_value post_max_size 16M
php_value upload_max_filesize 2M
php_value max_input_time 300
php_value max_input_vars 10000
php_value always_populate_raw_post_data -1
php_value date.timezone Asia/Shanghai
</IfModule>
</Directory>
<Directory "/usr/share/zabbix/conf">
Require all denied
</Directory>
<Directory "/usr/share/zabbix/app">
Require all denied
</Directory>
<Directory "/usr/share/zabbix/include">
Require all denied
</Directory>
<Directory "/usr/share/zabbix/local">
Require all denied
</Directory>
10、启动apache/zabbix-server服务并设置为开机启动
启动apache
# systemctl start httpd
# systemctl enable httpd
[root@localhost ~]# systemctl start httpd
[root@localhost ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor preset: disabled)
Active: active (running) since Wed 2019-04-03 01:41:59 CST; 19s ago
Docs: man:httpd(8)
man:apachectl(8)
Main PID: 68678 (httpd)
Status: "Total requests: 0; Current requests/sec: 0; Current traffic: 0 B/sec"
CGroup: /system.slice/httpd.service
├─68678 /usr/sbin/httpd -DFOREGROUND
├─68679 /usr/sbin/httpd -DFOREGROUND
├─68680 /usr/sbin/httpd -DFOREGROUND
├─68681 /usr/sbin/httpd -DFOREGROUND
├─68682 /usr/sbin/httpd -DFOREGROUND
└─68683 /usr/sbin/httpd -DFOREGROUND
Apr 03 01:41:59 localhost.localdomain systemd[1]: Starting The Apache HTTP Server...
Apr 03 01:41:59 localhost.localdomain httpd[68678]: AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using l... message
Apr 03 01:41:59 localhost.localdomain systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
[root@localhost ~]# systemctl enable httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.
[root@localhost ~]# 启动zabbix-server服务并设置为开机启动
# systemctl start zabbix-server
# systemctl enable zabbix-server
[root@localhost ~]# systemctl start zabbix-server
[root@localhost ~]#
[root@localhost ~]# systemctl enable zabbix-server
Created symlink from /etc/systemd/system/multi-user.target.wants/zabbix-server.service to /usr/lib/systemd/system/zabbix-server.service.
[root@localhost ~]# 查看zabbix-server日志
# tailf /var/log/zabbix/zabbix_server.log
[root@localhost ~]# tailf /var/log/zabbix/zabbix_server.log
4618:20190404:164956.559 server #28 started [icmp pinger #1]
4620:20190404:164956.560 server #30 started [preprocessing manager #1]
4622:20190404:164956.560 server #32 started [preprocessing worker #2]
4625:20190404:164956.561 server #35 started [lld worker #1]
4624:20190404:164956.561 server #34 started [lld manager #1]
4626:20190404:164956.561 server #36 started [lld worker #2]
4623:20190404:164956.562 server #33 started [preprocessing worker #3]
4619:20190404:164956.562 server #29 started [alert manager #1]
4621:20190404:164956.562 server #31 started [preprocessing worker #1]
4610:20190404:164958.602 enabling Zabbix agent checks on host "Zabbix server": host became availablezabbix-server的web目录
# ls /usr/share/zabbix
[root@localhost ~]# ls /usr/share/zabbix
actionconf.php audio discoveryconf.php image.php map.import.php slides.php
adm.gui.php auditacts.php disc_prototypes.php images map.php srv_status.php
adm.housekeeper.php auditlogs.php favicon.ico img overview.php styles
adm.iconmapping.php browserwarning.php fonts imgstore.php profile.php sysmap.php
adm.images.php chart2.php graphs.php include queue.php sysmaps.php
adm.macros.php chart3.php history.php index_http.php report2.php templates.php
adm.other.php chart4.php host_discovery.php index.php report4.php toptriggers.php
adm.regexps.php chart5.php hostgroups.php items.php robots.txt tr_events.php
adm.triggerdisplayoptions.php chart6.php hostinventoriesoverview.php js screenconf.php trigger_prototypes.php
adm.triggerseverities.php chart7.php hostinventories.php jsLoader.php screenedit.php triggers.php
adm.valuemapping.php chart.php host_prototypes.php jsrpc.php screen.import.php usergrps.php
adm.workingtime.php charts.php host_screen.php latest.php screens.php users.php
api_jsonrpc.php conf hosts.php local services.php zabbix.php
app conf.import.php httpconf.php locale setup.php
applications.php correlation.php httpdetails.php maintenance.php slideconf.php
10、访问网站，例如：http://本机IP/zabbix，如下图所示：
PHP版本
password是我们设置的数据库密码zabbix
输入名字
查看zabbix基础信息
finish
Zabbix·server的默认账号Admin 密码zabbix，如图所示：
基础界面如下
根据提示可以看到上面图形界面的操作都写到一个配置文件中
# more /etc/zabbix/web/zabbix.conf.php
[root@localhost ~]# more /etc/zabbix/web/zabbix.conf.php
<?php
// Zabbix GUI configuration file.
global $DB;
$DB['TYPE'] = 'MYSQL';
$DB['SERVER'] = 'localhost';
$DB['PORT'] = '0';
$DB['DATABASE'] = 'zabbix';
$DB['USER'] = 'zabbix';
$DB['PASSWORD'] = 'zabbix';
// Schema name. Used for IBM DB2 and PostgreSQL.
$DB['SCHEMA'] = '';
$ZBX_SERVER = 'localhost';
$ZBX_SERVER_PORT = '10051';
$ZBX_SERVER_NAME = 'zabbix4.2';
$IMAGE_FORMAT_DEFAULT = IMAGE_FORMAT_PNG;
[root@localhost ~]#移除或改名web目录下面的setup.php文件
# mv setup.php setup.php.bak
[root@localhost ~]# cd /usr/share/zabbix
[root@localhost zabbix]#
[root@localhost zabbix]# ls
actionconf.php audio discoveryconf.php image.php map.import.php slides.php
adm.gui.php auditacts.php disc_prototypes.php images map.php srv_status.php
adm.housekeeper.php auditlogs.php favicon.ico img overview.php styles
adm.iconmapping.php browserwarning.php fonts imgstore.php profile.php sysmap.php
adm.images.php chart2.php graphs.php include queue.php sysmaps.php
adm.macros.php chart3.php history.php index_http.php report2.php templates.php
adm.other.php chart4.php host_discovery.php index.php report4.php toptriggers.php
adm.regexps.php chart5.php hostgroups.php items.php robots.txt tr_events.php
adm.triggerdisplayoptions.php chart6.php hostinventoriesoverview.php js screenconf.php trigger_prototypes.php
adm.triggerseverities.php chart7.php hostinventories.php jsLoader.php screenedit.php triggers.php
adm.valuemapping.php chart.php host_prototypes.php jsrpc.php screen.import.php usergrps.php
adm.workingtime.php charts.php host_screen.php latest.php screens.php users.php
api_jsonrpc.php conf hosts.php local services.php zabbix.php
app conf.import.php httpconf.php locale setup.php
applications.php correlation.php httpdetails.php maintenance.php slideconf.php
[root@localhost zabbix]#
[root@localhost zabbix]# mv setup.php setup.php.bak
[root@localhost zabbix]#
设置新的密码，界面的主题、语言和登陆后显示的默认界面等
解决中文乱码无法显示的问题
Windows字体目录地址
C:\Windows\Fonts
复制到zabbix服务器中
查找Zabbix所使用的语言包
# find / -name *font* -print | grep zabbix
# ll `find / -name *font* -print | grep zabbix`
[root@localhost ~]# find / -name *font* -print | grep zabbix
/etc/alternatives/zabbix-web-font
/var/lib/alternatives/zabbix-web-font
/usr/share/zabbix/fonts
/usr/share/zabbix/fonts/graphfont.ttf
[root@localhost ~]#
[root@localhost ~]# ll `find / -name *font* -print | grep zabbix`
lrwxrwxrwx. 1 root root 38 Apr 4 14:43 /etc/alternatives/zabbix-web-font -> /usr/share/fonts/dejavu/DejaVuSans.ttf
lrwxrwxrwx. 1 root root 33 Apr 4 14:43 /usr/share/zabbix/fonts/graphfont.ttf -> /etc/alternatives/zabbix-web-font
-rw-r--r--. 1 root root 86 Apr 4 14:43 /var/lib/alternatives/zabbix-web-font
/usr/share/zabbix/fonts:
total 0
lrwxrwxrwx. 1 root root 33 Apr 4 14:43 graphfont.ttf -> /etc/alternatives/zabbix-web-font
[root@localhost ~]#备份本身语言包
# mv /usr/share/fonts/dejavu/DejaVuSans.ttf /usr/share/fonts/dejavu/DejaVuSans.ttf.bak
替换成Windows的语言包
# mv simkai.ttf /usr/share/fonts/dejavu/DejaVuSans.ttf
[root@localhost ~]# mv /usr/share/fonts/dejavu/DejaVuSans.ttf /usr/share/fonts/dejavu/DejaVuSans.ttf.bak
[root@localhost ~]#
[root@localhost ~]# ls
anaconda-ks.cfg simkai.ttf
[root@localhost ~]#
[root@localhost ~]# mv simkai.ttf /usr/share/fonts/dejavu/DejaVuSans.ttf
[root@localhost ~]#刷新页面已经恢复
参考博客：
https://www.cnblogs.com/Sungeek/p/9069999.html
http://www.cnblogs.com/xiewenming/p/7732144.html
zabbix4.2学习请参考这位博主
https://www.cnblogs.com/AutoSmart/p/10505090.html
